[PATCH net-next v2] net: mdiobus: Debug print fwnode handle instead of raw pointer

[Alexander Dahl <ada@thorsis.com>]

Was slightly misleading before, because printed is pointer to fwnode,
not to phy device, as placement in message suggested.  Include header
for dev_dbg() declaration while at it.

Output before:

    [  +0.001247] mdio_bus f802c000.ethernet-ffffffff: registered phy 2612f00a fwnode at address 3

Output after:

    [  +0.001229] mdio_bus f802c000.ethernet-ffffffff: registered phy fwnode /ahb/apb/ethernet@f802c000/ethernet-phy@3 at address 3

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
---

Notes:
    v2:
    - rebased on net-next
    - collected Reviewed-by tags
    
    v1:
    - Link: https://lore.kernel.org/netdev/20240905143248.203153-1-ada@thorsis.com/T/#u

 drivers/net/mdio/fwnode_mdio.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
index fd02f5cbc853..b156493d7084 100644
--- a/drivers/net/mdio/fwnode_mdio.c
+++ b/drivers/net/mdio/fwnode_mdio.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/dev_printk.h>
 #include <linux/fwnode_mdio.h>
 #include <linux/of.h>
 #include <linux/phy.h>
@@ -104,7 +105,7 @@ int fwnode_mdiobus_phy_device_register(struct mii_bus *mdio,
 		return rc;
 	}
 
-	dev_dbg(&mdio->dev, "registered phy %p fwnode at address %i\n",
+	dev_dbg(&mdio->dev, "registered phy fwnode %pfw at address %i\n",
 		child, addr);
 	return 0;
 }

base-commit: 76930d3d20d595ffffe516df1b3d6a70c4f33bd6
-- 
2.39.2