[PATCH net-next v4 0/2] ethtool: Add support for writing firmware

[PATCH net-next v4 0/2] ethtool: Add support for writing firmware

[Danielle Ratson]

In the CMIS specification for pluggable modules, LPL (Local Payload) and
EPL (Extended Payload) are two types of data payloads used for managing
various functions and features of the module.

EPL payloads are used for more complex and extensive management functions
that require a larger amount of data, so writing firmware blocks using EPL
is much more efficient.

Currently, only LPL payload is supported for writing firmware blocks to
the module.

Add support for writing firmware block using EPL payload, both to support
modules that support only EPL write mechanism, and to optimize the flashing
process of modules that support LPL and EPL.

Running the flashing command on the same sample module using EPL vs. LPL
showed an improvement of 84%.

Patchset overview:
Patch #1: preparations
Patch #2: Add EPL support

v4: Resending the right version after wrong v3.

v2:
	* Fix the commit meassges to align the cover letter about the
	  right meaning of LPL and EPL.
	Patch #2:
	* Initialize the variable 'bytes_written' before the first
	  iteration.

Danielle Ratson (2):
  net: ethtool: Add new parameters and a function to support EPL
  net: ethtool: Add support for writing firmware blocks using EPL
    payload

 net/ethtool/cmis.h           |  16 ++++--
 net/ethtool/cmis_cdb.c       |  94 +++++++++++++++++++++++++-----
 net/ethtool/cmis_fw_update.c | 108 +++++++++++++++++++++++++++++------
 3 files changed, 184 insertions(+), 34 deletions(-)

-- 
2.45.0

[PATCH net-next v4 1/2] net: ethtool: Add new parameters and a function to support EPL

[Danielle Ratson]

In the CMIS specification for pluggable modules, LPL (Local Payload) and
EPL (Extended Payload) are two types of data payloads used for managing
various functions and features of the module.

EPL payloads are used for more complex and extensive management
functions that require a larger amount of data, so writing firmware
blocks using EPL is much more efficient.

Currently, only LPL payload is supported for writing firmware blocks to
the module.

Add EPL related parameters to the function ethtool_cmis_cdb_compose_args()
and add a specific function for calculating the maximum allowable length
extension for EPL. Both will be used in the next patch to add support for
writing firmware blocks using EPL.

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
---
 net/ethtool/cmis.h           | 12 +++++++-----
 net/ethtool/cmis_cdb.c       | 32 +++++++++++++++++++++-----------
 net/ethtool/cmis_fw_update.c | 17 ++++++++++-------
 3 files changed, 38 insertions(+), 23 deletions(-)

diff --git a/net/ethtool/cmis.h b/net/ethtool/cmis.h
index 3e7c293af78c..73a5060d0f4c 100644
--- a/net/ethtool/cmis.h
+++ b/net/ethtool/cmis.h
@@ -96,13 +96,15 @@ struct ethtool_cmis_cdb_rpl {
 	u8 payload[ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH];
 };
 
-u32 ethtool_cmis_get_max_payload_size(u8 num_of_byte_octs);
+u32 ethtool_cmis_get_max_lpl_size(u8 num_of_byte_octs);
+u32 ethtool_cmis_get_max_epl_size(u8 num_of_byte_octs);
 
 void ethtool_cmis_cdb_compose_args(struct ethtool_cmis_cdb_cmd_args *args,
-				   enum ethtool_cmis_cdb_cmd_id cmd, u8 *pl,
-				   u8 lpl_len, u16 max_duration,
-				   u8 read_write_len_ext, u16 msleep_pre_rpl,
-				   u8 rpl_exp_len, u8 flags);
+				   enum ethtool_cmis_cdb_cmd_id cmd, u8 *lpl,
+				   u8 lpl_len, u8 *epl, u16 epl_len,
+				   u16 max_duration, u8 read_write_len_ext,
+				   u16 msleep_pre_rpl, u8 rpl_exp_len,
+				   u8 flags);
 
 void ethtool_cmis_cdb_check_completion_flag(u8 cmis_rev, u8 *flags);
 
diff --git a/net/ethtool/cmis_cdb.c b/net/ethtool/cmis_cdb.c
index 4d5581147952..80bb475fd52a 100644
--- a/net/ethtool/cmis_cdb.c
+++ b/net/ethtool/cmis_cdb.c
@@ -11,25 +11,34 @@
  * min(i, 15) byte octets where i specifies the allowable additional number of
  * byte octets in a READ or a WRITE.
  */
-u32 ethtool_cmis_get_max_payload_size(u8 num_of_byte_octs)
+u32 ethtool_cmis_get_max_lpl_size(u8 num_of_byte_octs)
 {
 	return 8 * (1 + min_t(u8, num_of_byte_octs, 15));
 }
 
+/* For accessing the EPL field on page 9Fh, the allowable length extension is
+ * min(i, 255) byte octets where i specifies the allowable additional number of
+ * byte octets in a READ or a WRITE.
+ */
+u32 ethtool_cmis_get_max_epl_size(u8 num_of_byte_octs)
+{
+	return 8 * (1 + min_t(u8, num_of_byte_octs, 255));
+}
+
 void ethtool_cmis_cdb_compose_args(struct ethtool_cmis_cdb_cmd_args *args,
-				   enum ethtool_cmis_cdb_cmd_id cmd, u8 *pl,
-				   u8 lpl_len, u16 max_duration,
-				   u8 read_write_len_ext, u16 msleep_pre_rpl,
-				   u8 rpl_exp_len, u8 flags)
+				   enum ethtool_cmis_cdb_cmd_id cmd, u8 *lpl,
+				   u8 lpl_len, u8 *epl, u16 epl_len,
+				   u16 max_duration, u8 read_write_len_ext,
+				   u16 msleep_pre_rpl, u8 rpl_exp_len, u8 flags)
 {
 	args->req.id = cpu_to_be16(cmd);
 	args->req.lpl_len = lpl_len;
-	if (pl)
-		memcpy(args->req.payload, pl, args->req.lpl_len);
+	if (lpl)
+		memcpy(args->req.payload, lpl, args->req.lpl_len);
 
 	args->max_duration = max_duration;
 	args->read_write_len_ext =
-		ethtool_cmis_get_max_payload_size(read_write_len_ext);
+		ethtool_cmis_get_max_lpl_size(read_write_len_ext);
 	args->msleep_pre_rpl = msleep_pre_rpl;
 	args->rpl_exp_len = rpl_exp_len;
 	args->flags = flags;
@@ -183,7 +192,7 @@ cmis_cdb_validate_password(struct ethtool_cmis_cdb *cdb,
 	}
 
 	ethtool_cmis_cdb_compose_args(&args, ETHTOOL_CMIS_CDB_CMD_QUERY_STATUS,
-				      (u8 *)&qs_pl, sizeof(qs_pl), 0,
+				      (u8 *)&qs_pl, sizeof(qs_pl), NULL, 0, 0,
 				      cdb->read_write_len_ext, 1000,
 				      sizeof(*rpl),
 				      CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID);
@@ -245,8 +254,9 @@ static int cmis_cdb_module_features_get(struct ethtool_cmis_cdb *cdb,
 	ethtool_cmis_cdb_check_completion_flag(cdb->cmis_rev, &flags);
 	ethtool_cmis_cdb_compose_args(&args,
 				      ETHTOOL_CMIS_CDB_CMD_MODULE_FEATURES,
-				      NULL, 0, 0, cdb->read_write_len_ext,
-				      1000, sizeof(*rpl), flags);
+				      NULL, 0, NULL, 0, 0,
+				      cdb->read_write_len_ext, 1000,
+				      sizeof(*rpl), flags);
 
 	err = ethtool_cmis_cdb_execute_cmd(dev, &args);
 	if (err < 0) {
diff --git a/net/ethtool/cmis_fw_update.c b/net/ethtool/cmis_fw_update.c
index 655ff5224ffa..a514127985d4 100644
--- a/net/ethtool/cmis_fw_update.c
+++ b/net/ethtool/cmis_fw_update.c
@@ -54,7 +54,8 @@ cmis_fw_update_fw_mng_features_get(struct ethtool_cmis_cdb *cdb,
 	ethtool_cmis_cdb_check_completion_flag(cdb->cmis_rev, &flags);
 	ethtool_cmis_cdb_compose_args(&args,
 				      ETHTOOL_CMIS_CDB_CMD_FW_MANAGMENT_FEATURES,
-				      NULL, 0, cdb->max_completion_time,
+				      NULL, 0, NULL, 0,
+				      cdb->max_completion_time,
 				      cdb->read_write_len_ext, 1000,
 				      sizeof(*rpl), flags);
 
@@ -122,7 +123,7 @@ cmis_fw_update_start_download(struct ethtool_cmis_cdb *cdb,
 
 	ethtool_cmis_cdb_compose_args(&args,
 				      ETHTOOL_CMIS_CDB_CMD_START_FW_DOWNLOAD,
-				      (u8 *)&pl, lpl_len,
+				      (u8 *)&pl, lpl_len, NULL, 0,
 				      fw_mng->max_duration_start,
 				      cdb->read_write_len_ext, 1000, 0,
 				      CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID);
@@ -158,7 +159,7 @@ cmis_fw_update_write_image(struct ethtool_cmis_cdb *cdb,
 	int err;
 
 	max_lpl_len = min_t(u32,
-			    ethtool_cmis_get_max_payload_size(cdb->read_write_len_ext),
+			    ethtool_cmis_get_max_lpl_size(cdb->read_write_len_ext),
 			    ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH);
 	max_block_size =
 		max_lpl_len - sizeof_field(struct cmis_cdb_write_fw_block_lpl_pl,
@@ -183,7 +184,7 @@ cmis_fw_update_write_image(struct ethtool_cmis_cdb *cdb,
 
 		ethtool_cmis_cdb_compose_args(&args,
 					      ETHTOOL_CMIS_CDB_CMD_WRITE_FW_BLOCK_LPL,
-					      (u8 *)&pl, lpl_len,
+					      (u8 *)&pl, lpl_len, NULL, 0,
 					      fw_mng->max_duration_write,
 					      cdb->read_write_len_ext, 1, 0,
 					      CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID);
@@ -212,7 +213,8 @@ cmis_fw_update_complete_download(struct ethtool_cmis_cdb *cdb,
 
 	ethtool_cmis_cdb_compose_args(&args,
 				      ETHTOOL_CMIS_CDB_CMD_COMPLETE_FW_DOWNLOAD,
-				      NULL, 0, fw_mng->max_duration_complete,
+				      NULL, 0, NULL, 0,
+				      fw_mng->max_duration_complete,
 				      cdb->read_write_len_ext, 1000, 0,
 				      CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID);
 
@@ -294,7 +296,7 @@ cmis_fw_update_run_image(struct ethtool_cmis_cdb *cdb, struct net_device *dev,
 	int err;
 
 	ethtool_cmis_cdb_compose_args(&args, ETHTOOL_CMIS_CDB_CMD_RUN_FW_IMAGE,
-				      (u8 *)&pl, sizeof(pl),
+				      (u8 *)&pl, sizeof(pl), NULL, 0,
 				      cdb->max_completion_time,
 				      cdb->read_write_len_ext, 1000, 0,
 				      CDB_F_MODULE_STATE_VALID);
@@ -326,7 +328,8 @@ cmis_fw_update_commit_image(struct ethtool_cmis_cdb *cdb,
 
 	ethtool_cmis_cdb_compose_args(&args,
 				      ETHTOOL_CMIS_CDB_CMD_COMMIT_FW_IMAGE,
-				      NULL, 0, cdb->max_completion_time,
+				      NULL, 0, NULL, 0,
+				      cdb->max_completion_time,
 				      cdb->read_write_len_ext, 1000, 0,
 				      CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID);
 
-- 
2.45.0

[PATCH net-next v4 2/2] net: ethtool: Add support for writing firmware blocks using EPL payload

[Danielle Ratson]

In the CMIS specification for pluggable modules, LPL (Local Payload) and
EPL (Extended Payload) are two types of data payloads used for managing
various functions and features of the module.

EPL payloads are used for more complex and extensive management
functions that require a larger amount of data, so writing firmware
blocks using EPL is much more efficient.

Currently, only LPL payload is supported for writing firmware blocks to
the module.

Add support for writing firmware block using EPL payload, both to
support modules that supports only EPL write mechanism, and to optimize
the flashing process of modules that support LPL and EPL.

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
---
 net/ethtool/cmis.h           |  4 ++
 net/ethtool/cmis_cdb.c       | 66 ++++++++++++++++++++++++--
 net/ethtool/cmis_fw_update.c | 91 ++++++++++++++++++++++++++++++++----
 3 files changed, 148 insertions(+), 13 deletions(-)

diff --git a/net/ethtool/cmis.h b/net/ethtool/cmis.h
index 73a5060d0f4c..1e790413db0e 100644
--- a/net/ethtool/cmis.h
+++ b/net/ethtool/cmis.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
 #define ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH		120
+#define ETHTOOL_CMIS_CDB_EPL_MAX_PL_LENGTH		2048
 #define ETHTOOL_CMIS_CDB_CMD_PAGE			0x9F
 #define ETHTOOL_CMIS_CDB_PAGE_I2C_ADDR			0x50
 
@@ -23,6 +24,7 @@ enum ethtool_cmis_cdb_cmd_id {
 	ETHTOOL_CMIS_CDB_CMD_FW_MANAGMENT_FEATURES	= 0x0041,
 	ETHTOOL_CMIS_CDB_CMD_START_FW_DOWNLOAD		= 0x0101,
 	ETHTOOL_CMIS_CDB_CMD_WRITE_FW_BLOCK_LPL		= 0x0103,
+	ETHTOOL_CMIS_CDB_CMD_WRITE_FW_BLOCK_EPL		= 0x0104,
 	ETHTOOL_CMIS_CDB_CMD_COMPLETE_FW_DOWNLOAD	= 0x0107,
 	ETHTOOL_CMIS_CDB_CMD_RUN_FW_IMAGE		= 0x0109,
 	ETHTOOL_CMIS_CDB_CMD_COMMIT_FW_IMAGE		= 0x010A,
@@ -38,6 +40,7 @@ enum ethtool_cmis_cdb_cmd_id {
  * @resv1: Added to match the CMIS standard request continuity.
  * @resv2: Added to match the CMIS standard request continuity.
  * @payload: Payload for the CDB commands.
+ * @epl: Extended payload for the CDB commands.
  */
 struct ethtool_cmis_cdb_request {
 	__be16 id;
@@ -49,6 +52,7 @@ struct ethtool_cmis_cdb_request {
 		u8 resv2;
 		u8 payload[ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH];
 	);
+	u8 *epl;	/* Everything above this field checksummed. */
 };
 
 #define CDB_F_COMPLETION_VALID		BIT(0)
diff --git a/net/ethtool/cmis_cdb.c b/net/ethtool/cmis_cdb.c
index 80bb475fd52a..d159dc121bde 100644
--- a/net/ethtool/cmis_cdb.c
+++ b/net/ethtool/cmis_cdb.c
@@ -33,12 +33,19 @@ void ethtool_cmis_cdb_compose_args(struct ethtool_cmis_cdb_cmd_args *args,
 {
 	args->req.id = cpu_to_be16(cmd);
 	args->req.lpl_len = lpl_len;
-	if (lpl)
+	if (lpl) {
 		memcpy(args->req.payload, lpl, args->req.lpl_len);
+		args->read_write_len_ext =
+			ethtool_cmis_get_max_lpl_size(read_write_len_ext);
+	}
+	if (epl) {
+		args->req.epl_len = cpu_to_be16(epl_len);
+		args->req.epl = epl;
+		args->read_write_len_ext =
+			ethtool_cmis_get_max_epl_size(read_write_len_ext);
+	}
 
 	args->max_duration = max_duration;
-	args->read_write_len_ext =
-		ethtool_cmis_get_max_lpl_size(read_write_len_ext);
 	args->msleep_pre_rpl = msleep_pre_rpl;
 	args->rpl_exp_len = rpl_exp_len;
 	args->flags = flags;
@@ -556,6 +563,49 @@ __ethtool_cmis_cdb_execute_cmd(struct net_device *dev,
 	return err;
 }
 
+#define CMIS_CDB_EPL_PAGE_START			0xA0
+#define CMIS_CDB_EPL_PAGE_END			0xAF
+#define CMIS_CDB_EPL_FW_BLOCK_OFFSET_START	128
+#define CMIS_CDB_EPL_FW_BLOCK_OFFSET_END	255
+
+static int
+ethtool_cmis_cdb_execute_epl_cmd(struct net_device *dev,
+				 struct ethtool_cmis_cdb_cmd_args *args,
+				 struct ethtool_module_eeprom *page_data)
+{
+	u16 epl_len = be16_to_cpu(args->req.epl_len);
+	u32 bytes_written = 0;
+	u8 page;
+	int err;
+
+	for (page = CMIS_CDB_EPL_PAGE_START;
+	     page <= CMIS_CDB_EPL_PAGE_END && bytes_written < epl_len; page++) {
+		u16 offset = CMIS_CDB_EPL_FW_BLOCK_OFFSET_START;
+
+		while (offset <= CMIS_CDB_EPL_FW_BLOCK_OFFSET_END &&
+		       bytes_written < epl_len) {
+			u32 bytes_left = epl_len - bytes_written;
+			u16 space_left, bytes_to_write;
+
+			space_left = CMIS_CDB_EPL_FW_BLOCK_OFFSET_END - offset + 1;
+			bytes_to_write = min_t(u16, bytes_left,
+					       min_t(u16, space_left,
+						     args->read_write_len_ext));
+
+			err = __ethtool_cmis_cdb_execute_cmd(dev, page_data,
+							     page, offset,
+							     bytes_to_write,
+							     args->req.epl + bytes_written);
+			if (err < 0)
+				return err;
+
+			offset += bytes_to_write;
+			bytes_written += bytes_to_write;
+		}
+	}
+	return 0;
+}
+
 static u8 cmis_cdb_calc_checksum(const void *data, size_t size)
 {
 	const u8 *bytes = (const u8 *)data;
@@ -577,7 +627,9 @@ int ethtool_cmis_cdb_execute_cmd(struct net_device *dev,
 	int err;
 
 	args->req.chk_code =
-		cmis_cdb_calc_checksum(&args->req, sizeof(args->req));
+		cmis_cdb_calc_checksum(&args->req,
+				       offsetof(struct ethtool_cmis_cdb_request,
+						epl));
 
 	if (args->req.lpl_len > args->read_write_len_ext) {
 		args->err_msg = "LPL length is longer than CDB read write length extension allows";
@@ -599,6 +651,12 @@ int ethtool_cmis_cdb_execute_cmd(struct net_device *dev,
 	if (err < 0)
 		return err;
 
+	if (args->req.epl_len) {
+		err = ethtool_cmis_cdb_execute_epl_cmd(dev, args, &page_data);
+		if (err < 0)
+			return err;
+	}
+
 	offset = CMIS_CDB_CMD_ID_OFFSET +
 		offsetof(struct ethtool_cmis_cdb_request, id);
 	err = __ethtool_cmis_cdb_execute_cmd(dev, &page_data,
diff --git a/net/ethtool/cmis_fw_update.c b/net/ethtool/cmis_fw_update.c
index a514127985d4..48aef6220f00 100644
--- a/net/ethtool/cmis_fw_update.c
+++ b/net/ethtool/cmis_fw_update.c
@@ -9,6 +9,7 @@
 
 struct cmis_fw_update_fw_mng_features {
 	u8	start_cmd_payload_size;
+	u8	write_mechanism;
 	u16	max_duration_start;
 	u16	max_duration_write;
 	u16	max_duration_complete;
@@ -36,7 +37,9 @@ struct cmis_cdb_fw_mng_features_rpl {
 };
 
 enum cmis_cdb_fw_write_mechanism {
+	CMIS_CDB_FW_WRITE_MECHANISM_NONE	= 0x00,
 	CMIS_CDB_FW_WRITE_MECHANISM_LPL		= 0x01,
+	CMIS_CDB_FW_WRITE_MECHANISM_EPL		= 0x10,
 	CMIS_CDB_FW_WRITE_MECHANISM_BOTH	= 0x11,
 };
 
@@ -68,10 +71,9 @@ cmis_fw_update_fw_mng_features_get(struct ethtool_cmis_cdb *cdb,
 	}
 
 	rpl = (struct cmis_cdb_fw_mng_features_rpl *)args.req.payload;
-	if (!(rpl->write_mechanism == CMIS_CDB_FW_WRITE_MECHANISM_LPL ||
-	      rpl->write_mechanism == CMIS_CDB_FW_WRITE_MECHANISM_BOTH)) {
+	if (rpl->write_mechanism == CMIS_CDB_FW_WRITE_MECHANISM_NONE) {
 		ethnl_module_fw_flash_ntf_err(dev, ntf_params,
-					      "Write LPL is not supported",
+					      "CDB write mechanism is not supported",
 					      NULL);
 		return  -EOPNOTSUPP;
 	}
@@ -83,6 +85,10 @@ cmis_fw_update_fw_mng_features_get(struct ethtool_cmis_cdb *cdb,
 	 */
 	cdb->read_write_len_ext = rpl->read_write_len_ext;
 	fw_mng->start_cmd_payload_size = rpl->start_cmd_payload_size;
+	fw_mng->write_mechanism =
+		rpl->write_mechanism == CMIS_CDB_FW_WRITE_MECHANISM_LPL ?
+		CMIS_CDB_FW_WRITE_MECHANISM_LPL :
+		CMIS_CDB_FW_WRITE_MECHANISM_EPL;
 	fw_mng->max_duration_start = be16_to_cpu(rpl->max_duration_start);
 	fw_mng->max_duration_write = be16_to_cpu(rpl->max_duration_write);
 	fw_mng->max_duration_complete = be16_to_cpu(rpl->max_duration_complete);
@@ -149,9 +155,9 @@ struct cmis_cdb_write_fw_block_lpl_pl {
 };
 
 static int
-cmis_fw_update_write_image(struct ethtool_cmis_cdb *cdb,
-			   struct ethtool_cmis_fw_update_params *fw_update,
-			   struct cmis_fw_update_fw_mng_features *fw_mng)
+cmis_fw_update_write_image_lpl(struct ethtool_cmis_cdb *cdb,
+			       struct ethtool_cmis_fw_update_params *fw_update,
+			       struct cmis_fw_update_fw_mng_features *fw_mng)
 {
 	u8 start = fw_mng->start_cmd_payload_size;
 	u32 offset, max_block_size, max_lpl_len;
@@ -202,6 +208,67 @@ cmis_fw_update_write_image(struct ethtool_cmis_cdb *cdb,
 	return 0;
 }
 
+struct cmis_cdb_write_fw_block_epl_pl {
+	u8 fw_block[ETHTOOL_CMIS_CDB_EPL_MAX_PL_LENGTH];
+};
+
+static int
+cmis_fw_update_write_image_epl(struct ethtool_cmis_cdb *cdb,
+			       struct ethtool_cmis_fw_update_params *fw_update,
+			       struct cmis_fw_update_fw_mng_features *fw_mng)
+{
+	u8 start = fw_mng->start_cmd_payload_size;
+	u32 image_size = fw_update->fw->size;
+	u32 offset, lpl_len;
+	int err;
+
+	lpl_len = sizeof_field(struct cmis_cdb_write_fw_block_lpl_pl,
+			       block_address);
+
+	for (offset = start; offset < image_size;
+	     offset += ETHTOOL_CMIS_CDB_EPL_MAX_PL_LENGTH) {
+		struct cmis_cdb_write_fw_block_lpl_pl lpl = {
+			.block_address = cpu_to_be32(offset - start),
+		};
+		struct cmis_cdb_write_fw_block_epl_pl *epl;
+		struct ethtool_cmis_cdb_cmd_args args = {};
+		u32 epl_len;
+
+		ethnl_module_fw_flash_ntf_in_progress(fw_update->dev,
+						      &fw_update->ntf_params,
+						      offset - start,
+						      image_size);
+
+		epl_len = min_t(u32, ETHTOOL_CMIS_CDB_EPL_MAX_PL_LENGTH,
+				image_size - offset);
+		epl = kmalloc_array(epl_len, sizeof(u8), GFP_KERNEL);
+		if (!epl)
+			return -ENOMEM;
+
+		memcpy(epl->fw_block, &fw_update->fw->data[offset], epl_len);
+
+		ethtool_cmis_cdb_compose_args(&args,
+					      ETHTOOL_CMIS_CDB_CMD_WRITE_FW_BLOCK_EPL,
+					      (u8 *)&lpl, lpl_len, (u8 *)epl,
+					      epl_len,
+					      fw_mng->max_duration_write,
+					      cdb->read_write_len_ext, 1, 0,
+					      CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID);
+
+		err = ethtool_cmis_cdb_execute_cmd(fw_update->dev, &args);
+		kfree(epl);
+		if (err < 0) {
+			ethnl_module_fw_flash_ntf_err(fw_update->dev,
+						      &fw_update->ntf_params,
+						      "Write FW block EPL command failed",
+						      args.err_msg);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
 static int
 cmis_fw_update_complete_download(struct ethtool_cmis_cdb *cdb,
 				 struct net_device *dev,
@@ -238,9 +305,15 @@ cmis_fw_update_download_image(struct ethtool_cmis_cdb *cdb,
 	if (err < 0)
 		return err;
 
-	err = cmis_fw_update_write_image(cdb, fw_update, fw_mng);
-	if (err < 0)
-		return err;
+	if (fw_mng->write_mechanism == CMIS_CDB_FW_WRITE_MECHANISM_LPL) {
+		err = cmis_fw_update_write_image_lpl(cdb, fw_update, fw_mng);
+		if (err < 0)
+			return err;
+	} else {
+		err = cmis_fw_update_write_image_epl(cdb, fw_update, fw_mng);
+		if (err < 0)
+			return err;
+	}
 
 	err = cmis_fw_update_complete_download(cdb, fw_update->dev, fw_mng,
 					       &fw_update->ntf_params);
-- 
2.45.0

Re: [PATCH net-next v4 0/2] ethtool: Add support for writing firmware

[Simon Horman]

On Tue, Oct 01, 2024 at 03:41:48PM +0300, Danielle Ratson wrote:
> In the CMIS specification for pluggable modules, LPL (Local Payload) and
> EPL (Extended Payload) are two types of data payloads used for managing
> various functions and features of the module.
> 
> EPL payloads are used for more complex and extensive management functions
> that require a larger amount of data, so writing firmware blocks using EPL
> is much more efficient.
> 
> Currently, only LPL payload is supported for writing firmware blocks to
> the module.
> 
> Add support for writing firmware block using EPL payload, both to support
> modules that support only EPL write mechanism, and to optimize the flashing
> process of modules that support LPL and EPL.
> 
> Running the flashing command on the same sample module using EPL vs. LPL
> showed an improvement of 84%.
> 
> Patchset overview:
> Patch #1: preparations
> Patch #2: Add EPL support
> 
> v4: Resending the right version after wrong v3.

Thanks, this one looks good :)

> 
> v2:
> 	* Fix the commit meassges to align the cover letter about the
> 	  right meaning of LPL and EPL.
> 	Patch #2:
> 	* Initialize the variable 'bytes_written' before the first
> 	  iteration.
> 
> Danielle Ratson (2):
>   net: ethtool: Add new parameters and a function to support EPL
>   net: ethtool: Add support for writing firmware blocks using EPL
>     payload
> 
>  net/ethtool/cmis.h           |  16 ++++--
>  net/ethtool/cmis_cdb.c       |  94 +++++++++++++++++++++++++-----
>  net/ethtool/cmis_fw_update.c | 108 +++++++++++++++++++++++++++++------
>  3 files changed, 184 insertions(+), 34 deletions(-)
> 
> -- 
> 2.45.0
> 

Re: [PATCH net-next v4 0/2] ethtool: Add support for writing firmware

[Jakub Kicinski]

On Tue, 1 Oct 2024 15:41:48 +0300 Danielle Ratson wrote:
> Patchset overview:
> Patch #1: preparations
> Patch #2: Add EPL support

Would you mind reposting?
I'm worried people who may need to review this didn't pay attention,
plus NIPA build testing got wedged on Rust code during the merge window
so we got no testing coverage of this set :(
-- 
pw-bot: cr

RE: [PATCH net-next v4 0/2] ethtool: Add support for writing firmware

[Danielle Ratson]

> From: Jakub Kicinski <kuba@kernel.org>
> Sent: Tuesday, 8 October 2024 18:12
> To: Danielle Ratson <danieller@nvidia.com>
> Cc: netdev@vger.kernel.org; davem@davemloft.net; edumazet@google.com;
> pabeni@redhat.com; yuehaibing@huawei.com; horms@kernel.org; linux-
> kernel@vger.kernel.org; Petr Machata <petrm@nvidia.com>
> Subject: Re: [PATCH net-next v4 0/2] ethtool: Add support for writing
> firmware
> 
> On Tue, 1 Oct 2024 15:41:48 +0300 Danielle Ratson wrote:
> > Patchset overview:
> > Patch #1: preparations
> > Patch #2: Add EPL support
> 
> Would you mind reposting?
> I'm worried people who may need to review this didn't pay attention, plus
> NIPA build testing got wedged on Rust code during the merge window so we
> got no testing coverage of this set :(

No problem, I will, thanks. 
Please note that this patch was already reviewed in the last kernel window and wasn’t applied, according to you, as there was no "clear enough signal form the discussion to merge it in time".
This will be reposting the same reposted version from the last window.

> --
> pw-bot: cr