[PATCH net-next v3 00/17] ibm: emac: more cleanups

[PATCH net-next v3 00/17] ibm: emac: more cleanups

[Rosen Penev]

Tested on Cisco MX60W.

Added devm for the submodules and removed custom init/exit functions as
EPROBE_DEFER is handled now.

v2: fixed build errors. Also added extra commits to clean the driver up
further.
v3: Added tested message. Removed bad alloc_netdev_dummy commit.

Rosen Penev (17):
  net: ibm: emac: use netif_receive_skb_list
  net: ibm: emac: remove custom init/exit functions
  net: ibm: emac: use module_platform_driver for modules
  net: ibm: emac: use devm_platform_ioremap_resource
  net: ibm: emac: use platform_get_irq
  net: ibm: emac: remove bootlist support
  net: ibm: emac: tah: use devm for kzalloc
  net: ibm: emac: tah: devm_platform_get_resources
  net: ibm: emac: rgmii: use devm for kzalloc
  net: ibm: emac: rgmii: devm_platform_get_resource
  net: ibm: emac: zmii: use devm for kzalloc
  net: ibm: emac: zmii: devm_platform_get_resource
  net: ibm: emac: mal: use devm for kzalloc
  net: ibm: emac: mal: use devm for request_irq
  net: ibm: emac: mal: move irq maps down
  net: ibm: emac: mal: add dcr_unmap to _remove
  net: ibm: emac: mal: move dcr map down

 drivers/net/ethernet/ibm/emac/core.c  | 175 +++-----------------------
 drivers/net/ethernet/ibm/emac/mal.c   | 117 ++++++-----------
 drivers/net/ethernet/ibm/emac/mal.h   |   4 -
 drivers/net/ethernet/ibm/emac/rgmii.c |  53 ++------
 drivers/net/ethernet/ibm/emac/rgmii.h |   4 -
 drivers/net/ethernet/ibm/emac/tah.c   |  53 ++------
 drivers/net/ethernet/ibm/emac/tah.h   |   4 -
 drivers/net/ethernet/ibm/emac/zmii.c  |  53 ++------
 drivers/net/ethernet/ibm/emac/zmii.h  |   4 -
 9 files changed, 84 insertions(+), 383 deletions(-)

-- 
2.46.2

[PATCH net-next v3 01/17] net: ibm: emac: use netif_receive_skb_list

[Rosen Penev]

Small rx improvement. Would use napi_gro_receive instead but that's a
lot more involved than netif_receive_skb_list because of how the
function is implemented.

Before:

> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  1] local 192.168.1.101 port 51556 connected with 192.168.1.1 port 5001
[ ID] Interval       Transfer     Bandwidth
[  1] 0.00-10.04 sec   559 MBytes   467 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  1] local 192.168.1.101 port 48228 connected with 192.168.1.1 port 5001
[ ID] Interval       Transfer     Bandwidth
[  1] 0.00-10.03 sec   558 MBytes   467 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  1] local 192.168.1.101 port 47600 connected with 192.168.1.1 port 5001
[ ID] Interval       Transfer     Bandwidth
[  1] 0.00-10.04 sec   557 MBytes   466 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  1] local 192.168.1.101 port 37252 connected with 192.168.1.1 port 5001
[ ID] Interval       Transfer     Bandwidth
[  1] 0.00-10.05 sec   559 MBytes   467 Mbits/sec

After:

> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  1] local 192.168.1.101 port 40786 connected with 192.168.1.1 port 5001
[ ID] Interval       Transfer     Bandwidth
[  1] 0.00-10.05 sec   572 MBytes   478 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  1] local 192.168.1.101 port 52482 connected with 192.168.1.1 port 5001
[ ID] Interval       Transfer     Bandwidth
[  1] 0.00-10.04 sec   571 MBytes   477 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  1] local 192.168.1.101 port 48370 connected with 192.168.1.1 port 5001
[ ID] Interval       Transfer     Bandwidth
[  1] 0.00-10.04 sec   572 MBytes   478 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  1] local 192.168.1.101 port 46086 connected with 192.168.1.1 port 5001
[ ID] Interval       Transfer     Bandwidth
[  1] 0.00-10.05 sec   571 MBytes   476 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  1] local 192.168.1.101 port 46062 connected with 192.168.1.1 port 5001
[ ID] Interval       Transfer     Bandwidth
[  1] 0.00-10.04 sec   572 MBytes   478 Mbits/sec

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index dac570f3c110..d476844bae3e 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -1727,6 +1727,7 @@ static inline int emac_rx_sg_append(struct emac_instance *dev, int slot)
 /* NAPI poll context */
 static int emac_poll_rx(void *param, int budget)
 {
+	LIST_HEAD(rx_list);
 	struct emac_instance *dev = param;
 	int slot = dev->rx_slot, received = 0;
 
@@ -1783,8 +1784,7 @@ static int emac_poll_rx(void *param, int budget)
 		skb->protocol = eth_type_trans(skb, dev->ndev);
 		emac_rx_csum(dev, skb, ctrl);
 
-		if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
-			++dev->estats.rx_dropped_stack;
+		list_add_tail(&skb->list, &rx_list);
 	next:
 		++dev->stats.rx_packets;
 	skip:
@@ -1828,6 +1828,8 @@ static int emac_poll_rx(void *param, int budget)
 		goto next;
 	}
 
+	netif_receive_skb_list(&rx_list);
+
 	if (received) {
 		DBG2(dev, "rx %d BDs" NL, received);
 		dev->rx_slot = slot;
-- 
2.46.2

[PATCH net-next v3 02/17] net: ibm: emac: remove custom init/exit functions

[Rosen Penev]

Now that we're using EPROBE_DEFER, we don't have to do custom
initialization and we can let the core handle this for us.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/core.c  | 39 +--------------------------
 drivers/net/ethernet/ibm/emac/mal.h   |  4 ---
 drivers/net/ethernet/ibm/emac/rgmii.h |  4 ---
 drivers/net/ethernet/ibm/emac/tah.h   |  4 ---
 drivers/net/ethernet/ibm/emac/zmii.h  |  4 ---
 5 files changed, 1 insertion(+), 54 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index d476844bae3e..97ae0b7ccb0d 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -3283,42 +3283,10 @@ static void __init emac_make_bootlist(void)
 
 static int __init emac_init(void)
 {
-	int rc;
-
-	printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n");
-
 	/* Build EMAC boot list */
 	emac_make_bootlist();
 
-	/* Init submodules */
-	rc = mal_init();
-	if (rc)
-		goto err;
-	rc = zmii_init();
-	if (rc)
-		goto err_mal;
-	rc = rgmii_init();
-	if (rc)
-		goto err_zmii;
-	rc = tah_init();
-	if (rc)
-		goto err_rgmii;
-	rc = platform_driver_register(&emac_driver);
-	if (rc)
-		goto err_tah;
-
-	return 0;
-
- err_tah:
-	tah_exit();
- err_rgmii:
-	rgmii_exit();
- err_zmii:
-	zmii_exit();
- err_mal:
-	mal_exit();
- err:
-	return rc;
+	return platform_driver_register(&emac_driver);
 }
 
 static void __exit emac_exit(void)
@@ -3327,11 +3295,6 @@ static void __exit emac_exit(void)
 
 	platform_driver_unregister(&emac_driver);
 
-	tah_exit();
-	rgmii_exit();
-	zmii_exit();
-	mal_exit();
-
 	/* Destroy EMAC boot list */
 	for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++)
 		of_node_put(emac_boot_list[i]);
diff --git a/drivers/net/ethernet/ibm/emac/mal.h b/drivers/net/ethernet/ibm/emac/mal.h
index e0ddc41186a2..2963b36be6f5 100644
--- a/drivers/net/ethernet/ibm/emac/mal.h
+++ b/drivers/net/ethernet/ibm/emac/mal.h
@@ -252,10 +252,6 @@ static inline int mal_has_feature(struct mal_instance *dev,
 		(MAL_FTRS_POSSIBLE & dev->features & feature);
 }
 
-/* Register MAL devices */
-int mal_init(void);
-void mal_exit(void);
-
 int mal_register_commac(struct mal_instance *mal,
 			struct mal_commac *commac);
 void mal_unregister_commac(struct mal_instance *mal,
diff --git a/drivers/net/ethernet/ibm/emac/rgmii.h b/drivers/net/ethernet/ibm/emac/rgmii.h
index 8e4e36eed172..170bcd35039b 100644
--- a/drivers/net/ethernet/ibm/emac/rgmii.h
+++ b/drivers/net/ethernet/ibm/emac/rgmii.h
@@ -52,8 +52,6 @@ struct rgmii_instance {
 
 #ifdef CONFIG_IBM_EMAC_RGMII
 
-int rgmii_init(void);
-void rgmii_exit(void);
 int rgmii_attach(struct platform_device *ofdev, int input, int mode);
 void rgmii_detach(struct platform_device *ofdev, int input);
 void rgmii_get_mdio(struct platform_device *ofdev, int input);
@@ -64,8 +62,6 @@ void *rgmii_dump_regs(struct platform_device *ofdev, void *buf);
 
 #else
 
-# define rgmii_init()		0
-# define rgmii_exit()		do { } while(0)
 # define rgmii_attach(x,y,z)	(-ENXIO)
 # define rgmii_detach(x,y)	do { } while(0)
 # define rgmii_get_mdio(o,i)	do { } while (0)
diff --git a/drivers/net/ethernet/ibm/emac/tah.h b/drivers/net/ethernet/ibm/emac/tah.h
index 86c2b6b9d460..60c16cf7a41a 100644
--- a/drivers/net/ethernet/ibm/emac/tah.h
+++ b/drivers/net/ethernet/ibm/emac/tah.h
@@ -68,8 +68,6 @@ struct tah_instance {
 
 #ifdef CONFIG_IBM_EMAC_TAH
 
-int tah_init(void);
-void tah_exit(void);
 int tah_attach(struct platform_device *ofdev, int channel);
 void tah_detach(struct platform_device *ofdev, int channel);
 void tah_reset(struct platform_device *ofdev);
@@ -78,8 +76,6 @@ void *tah_dump_regs(struct platform_device *ofdev, void *buf);
 
 #else
 
-# define tah_init()		0
-# define tah_exit()		do { } while(0)
 # define tah_attach(x,y)	(-ENXIO)
 # define tah_detach(x,y)	do { } while(0)
 # define tah_reset(x)		do { } while(0)
diff --git a/drivers/net/ethernet/ibm/emac/zmii.h b/drivers/net/ethernet/ibm/emac/zmii.h
index 65daedc78594..213de06d8ea2 100644
--- a/drivers/net/ethernet/ibm/emac/zmii.h
+++ b/drivers/net/ethernet/ibm/emac/zmii.h
@@ -48,8 +48,6 @@ struct zmii_instance {
 
 #ifdef CONFIG_IBM_EMAC_ZMII
 
-int zmii_init(void);
-void zmii_exit(void);
 int zmii_attach(struct platform_device *ofdev, int input,
 		phy_interface_t *mode);
 void zmii_detach(struct platform_device *ofdev, int input);
@@ -60,8 +58,6 @@ int zmii_get_regs_len(struct platform_device *ocpdev);
 void *zmii_dump_regs(struct platform_device *ofdev, void *buf);
 
 #else
-# define zmii_init()		0
-# define zmii_exit()		do { } while(0)
 # define zmii_attach(x,y,z)	(-ENXIO)
 # define zmii_detach(x,y)	do { } while(0)
 # define zmii_get_mdio(x,y)	do { } while(0)
-- 
2.46.2

[PATCH net-next v3 03/17] net: ibm: emac: use module_platform_driver for modules

[Rosen Penev]

These init and exit functions don't do anything special. Just macro it
away.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/mal.c   | 10 +---------
 drivers/net/ethernet/ibm/emac/rgmii.c | 10 +---------
 drivers/net/ethernet/ibm/emac/tah.c   | 10 +---------
 drivers/net/ethernet/ibm/emac/zmii.c  | 10 +---------
 4 files changed, 4 insertions(+), 36 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c
index d92dd9c83031..a632d3a207d3 100644
--- a/drivers/net/ethernet/ibm/emac/mal.c
+++ b/drivers/net/ethernet/ibm/emac/mal.c
@@ -779,12 +779,4 @@ static struct platform_driver mal_of_driver = {
 	.remove_new = mal_remove,
 };
 
-int __init mal_init(void)
-{
-	return platform_driver_register(&mal_of_driver);
-}
-
-void mal_exit(void)
-{
-	platform_driver_unregister(&mal_of_driver);
-}
+module_platform_driver(mal_of_driver);
diff --git a/drivers/net/ethernet/ibm/emac/rgmii.c b/drivers/net/ethernet/ibm/emac/rgmii.c
index e1712fdc3c31..52f080661f87 100644
--- a/drivers/net/ethernet/ibm/emac/rgmii.c
+++ b/drivers/net/ethernet/ibm/emac/rgmii.c
@@ -303,12 +303,4 @@ static struct platform_driver rgmii_driver = {
 	.remove_new = rgmii_remove,
 };
 
-int __init rgmii_init(void)
-{
-	return platform_driver_register(&rgmii_driver);
-}
-
-void rgmii_exit(void)
-{
-	platform_driver_unregister(&rgmii_driver);
-}
+module_platform_driver(rgmii_driver);
diff --git a/drivers/net/ethernet/ibm/emac/tah.c b/drivers/net/ethernet/ibm/emac/tah.c
index fa3488258ca2..8407ff83b1d3 100644
--- a/drivers/net/ethernet/ibm/emac/tah.c
+++ b/drivers/net/ethernet/ibm/emac/tah.c
@@ -161,12 +161,4 @@ static struct platform_driver tah_driver = {
 	.remove_new = tah_remove,
 };
 
-int __init tah_init(void)
-{
-	return platform_driver_register(&tah_driver);
-}
-
-void tah_exit(void)
-{
-	platform_driver_unregister(&tah_driver);
-}
+module_platform_driver(tah_driver);
diff --git a/drivers/net/ethernet/ibm/emac/zmii.c b/drivers/net/ethernet/ibm/emac/zmii.c
index 26e86cdee2f6..97cea64abe55 100644
--- a/drivers/net/ethernet/ibm/emac/zmii.c
+++ b/drivers/net/ethernet/ibm/emac/zmii.c
@@ -309,12 +309,4 @@ static struct platform_driver zmii_driver = {
 	.remove_new = zmii_remove,
 };
 
-int __init zmii_init(void)
-{
-	return platform_driver_register(&zmii_driver);
-}
-
-void zmii_exit(void)
-{
-	platform_driver_unregister(&zmii_driver);
-}
+module_platform_driver(zmii_driver);
-- 
2.46.2

[PATCH net-next v3 04/17] net: ibm: emac: use devm_platform_ioremap_resource

[Rosen Penev]

No need to have a struct resource. Gets rid of the TODO.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/core.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index 97ae0b7ccb0d..205ba7aa02d4 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -3050,12 +3050,10 @@ static int emac_probe(struct platform_device *ofdev)
 
 	ndev->irq = dev->emac_irq;
 
-	/* Map EMAC regs */
-	// TODO : platform_get_resource() and devm_ioremap_resource()
-	dev->emacp = devm_of_iomap(&ofdev->dev, np, 0, NULL);
-	if (!dev->emacp) {
+	dev->emacp = devm_platform_ioremap_resource(ofdev, 0);
+	if (IS_ERR(dev->emacp)) {
 		dev_err(&ofdev->dev, "can't map device registers");
-		err = -ENOMEM;
+		err = PTR_ERR(dev->emacp);
 		goto err_gone;
 	}
 
-- 
2.46.2

[PATCH net-next v3 05/17] net: ibm: emac: use platform_get_irq

[Rosen Penev]

No need for irq_of_parse_and_map since we have platform_device.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/core.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index 205ba7aa02d4..a55e84eb1d4d 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -3031,15 +3031,8 @@ static int emac_probe(struct platform_device *ofdev)
 	if (err)
 		goto err_gone;
 
-	/* Get interrupts. EMAC irq is mandatory */
-	dev->emac_irq = irq_of_parse_and_map(np, 0);
-	if (!dev->emac_irq) {
-		printk(KERN_ERR "%pOF: Can't map main interrupt\n", np);
-		err = -ENODEV;
-		goto err_gone;
-	}
-
 	/* Setup error IRQ handler */
+	dev->emac_irq = platform_get_irq(ofdev, 0);
 	err = devm_request_irq(&ofdev->dev, dev->emac_irq, emac_irq, 0, "EMAC",
 			       dev);
 	if (err) {
-- 
2.46.2

[PATCH net-next v3 06/17] net: ibm: emac: remove bootlist support

[Rosen Penev]

This seems to be mainly used for deterministic interfaces. systemd
already does this in userspace.

Allows simplifying the driver with a single module_platform_driver.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/core.c | 117 +++------------------------
 1 file changed, 9 insertions(+), 108 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index a55e84eb1d4d..a4701e2f9f73 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -95,21 +95,6 @@ MODULE_LICENSE("GPL");
 static u32 busy_phy_map;
 static DEFINE_MUTEX(emac_phy_map_lock);
 
-/* Having stable interface names is a doomed idea. However, it would be nice
- * if we didn't have completely random interface names at boot too :-) It's
- * just a matter of making everybody's life easier. Since we are doing
- * threaded probing, it's a bit harder though. The base idea here is that
- * we make up a list of all emacs in the device-tree before we register the
- * driver. Every emac will then wait for the previous one in the list to
- * initialize before itself. We should also keep that list ordered by
- * cell_index.
- * That list is only 4 entries long, meaning that additional EMACs don't
- * get ordering guarantees unless EMAC_BOOT_LIST_SIZE is increased.
- */
-
-#define EMAC_BOOT_LIST_SIZE	4
-static struct device_node *emac_boot_list[EMAC_BOOT_LIST_SIZE];
-
 /* I don't want to litter system log with timeout errors
  * when we have brain-damaged PHY.
  */
@@ -2330,14 +2315,12 @@ struct emac_depentry {
 #define	EMAC_DEP_RGMII_IDX	2
 #define	EMAC_DEP_TAH_IDX	3
 #define	EMAC_DEP_MDIO_IDX	4
-#define	EMAC_DEP_PREV_IDX	5
-#define	EMAC_DEP_COUNT		6
+#define	EMAC_DEP_COUNT		5
 
 static int emac_check_deps(struct emac_instance *dev,
 			   struct emac_depentry *deps)
 {
 	int i, there = 0;
-	struct device_node *np;
 
 	for (i = 0; i < EMAC_DEP_COUNT; i++) {
 		/* no dependency on that item, allright */
@@ -2345,17 +2328,6 @@ static int emac_check_deps(struct emac_instance *dev,
 			there++;
 			continue;
 		}
-		/* special case for blist as the dependency might go away */
-		if (i == EMAC_DEP_PREV_IDX) {
-			np = *(dev->blist - 1);
-			if (np == NULL) {
-				deps[i].phandle = 0;
-				there++;
-				continue;
-			}
-			if (deps[i].node == NULL)
-				deps[i].node = of_node_get(np);
-		}
 		if (deps[i].node == NULL)
 			deps[i].node = of_find_node_by_phandle(deps[i].phandle);
 		if (deps[i].node == NULL)
@@ -2397,8 +2369,6 @@ static int emac_wait_deps(struct emac_instance *dev)
 		deps[EMAC_DEP_TAH_IDX].phandle = dev->tah_ph;
 	if (dev->mdio_ph)
 		deps[EMAC_DEP_MDIO_IDX].phandle = dev->mdio_ph;
-	if (dev->blist && dev->blist > emac_boot_list)
-		deps[EMAC_DEP_PREV_IDX].phandle = 0xffffffffu;
 	err = emac_check_deps(dev, deps);
 	for (i = 0; i < EMAC_DEP_COUNT; i++) {
 		of_node_put(deps[i].node);
@@ -2412,7 +2382,6 @@ static int emac_wait_deps(struct emac_instance *dev)
 		dev->tah_dev = deps[EMAC_DEP_TAH_IDX].ofdev;
 		dev->mdio_dev = deps[EMAC_DEP_MDIO_IDX].ofdev;
 	}
-	platform_device_put(deps[EMAC_DEP_PREV_IDX].ofdev);
 	return err;
 }
 
@@ -2993,8 +2962,7 @@ static int emac_probe(struct platform_device *ofdev)
 	struct net_device *ndev;
 	struct emac_instance *dev;
 	struct device_node *np = ofdev->dev.of_node;
-	struct device_node **blist = NULL;
-	int err, i;
+	int err;
 
 	/* Skip unused/unwired EMACS.  We leave the check for an unused
 	 * property here for now, but new flat device trees should set a
@@ -3003,21 +2971,14 @@ static int emac_probe(struct platform_device *ofdev)
 	if (of_property_read_bool(np, "unused") || !of_device_is_available(np))
 		return -ENODEV;
 
-	/* Find ourselves in the bootlist if we are there */
-	for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++)
-		if (emac_boot_list[i] == np)
-			blist = &emac_boot_list[i];
-
 	/* Allocate our net_device structure */
-	err = -ENOMEM;
 	ndev = devm_alloc_etherdev(&ofdev->dev, sizeof(struct emac_instance));
 	if (!ndev)
-		goto err_gone;
+		return -ENOMEM;
 
 	dev = netdev_priv(ndev);
 	dev->ndev = ndev;
 	dev->ofdev = ofdev;
-	dev->blist = blist;
 	SET_NETDEV_DEV(ndev, &ofdev->dev);
 
 	/* Initialize some embedded data structures */
@@ -3029,16 +2990,15 @@ static int emac_probe(struct platform_device *ofdev)
 	/* Init various config data based on device-tree */
 	err = emac_init_config(dev);
 	if (err)
-		goto err_gone;
+		return err;
 
 	/* Setup error IRQ handler */
 	dev->emac_irq = platform_get_irq(ofdev, 0);
 	err = devm_request_irq(&ofdev->dev, dev->emac_irq, emac_irq, 0, "EMAC",
 			       dev);
 	if (err) {
-		dev_err_probe(&ofdev->dev, err, "failed to request IRQ %d",
-			      dev->emac_irq);
-		goto err_gone;
+		return dev_err_probe(&ofdev->dev, err,
+				     "failed to request IRQ %d", dev->emac_irq);
 	}
 
 	ndev->irq = dev->emac_irq;
@@ -3046,14 +3006,13 @@ static int emac_probe(struct platform_device *ofdev)
 	dev->emacp = devm_platform_ioremap_resource(ofdev, 0);
 	if (IS_ERR(dev->emacp)) {
 		dev_err(&ofdev->dev, "can't map device registers");
-		err = PTR_ERR(dev->emacp);
-		goto err_gone;
+		return PTR_ERR(dev->emacp);
 	}
 
 	/* Wait for dependent devices */
 	err = emac_wait_deps(dev);
 	if (err)
-		goto err_gone;
+		return err;
 	dev->mal = platform_get_drvdata(dev->mal_dev);
 	if (dev->mdio_dev != NULL)
 		dev->mdio_instance = platform_get_drvdata(dev->mdio_dev);
@@ -3181,9 +3140,6 @@ static int emac_probe(struct platform_device *ofdev)
 	mal_unregister_commac(dev->mal, &dev->commac);
  err_rel_deps:
 	emac_put_deps(dev);
- err_gone:
-	if (blist)
-		*blist = NULL;
 	return err;
 }
 
@@ -3237,59 +3193,4 @@ static struct platform_driver emac_driver = {
 	.remove_new = emac_remove,
 };
 
-static void __init emac_make_bootlist(void)
-{
-	struct device_node *np = NULL;
-	int j, max, i = 0;
-	int cell_indices[EMAC_BOOT_LIST_SIZE];
-
-	/* Collect EMACs */
-	while((np = of_find_all_nodes(np)) != NULL) {
-		u32 idx;
-
-		if (of_match_node(emac_match, np) == NULL)
-			continue;
-		if (of_property_read_bool(np, "unused"))
-			continue;
-		if (of_property_read_u32(np, "cell-index", &idx))
-			continue;
-		cell_indices[i] = idx;
-		emac_boot_list[i++] = of_node_get(np);
-		if (i >= EMAC_BOOT_LIST_SIZE) {
-			of_node_put(np);
-			break;
-		}
-	}
-	max = i;
-
-	/* Bubble sort them (doh, what a creative algorithm :-) */
-	for (i = 0; max > 1 && (i < (max - 1)); i++)
-		for (j = i; j < max; j++) {
-			if (cell_indices[i] > cell_indices[j]) {
-				swap(emac_boot_list[i], emac_boot_list[j]);
-				swap(cell_indices[i], cell_indices[j]);
-			}
-		}
-}
-
-static int __init emac_init(void)
-{
-	/* Build EMAC boot list */
-	emac_make_bootlist();
-
-	return platform_driver_register(&emac_driver);
-}
-
-static void __exit emac_exit(void)
-{
-	int i;
-
-	platform_driver_unregister(&emac_driver);
-
-	/* Destroy EMAC boot list */
-	for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++)
-		of_node_put(emac_boot_list[i]);
-}
-
-module_init(emac_init);
-module_exit(emac_exit);
+module_platform_driver(emac_driver);
-- 
2.46.2

[PATCH net-next v3 07/17] net: ibm: emac: tah: use devm for kzalloc

[Rosen Penev]

Simplifies the probe function by removing gotos.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/tah.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/tah.c b/drivers/net/ethernet/ibm/emac/tah.c
index 8407ff83b1d3..03e0a4445569 100644
--- a/drivers/net/ethernet/ibm/emac/tah.c
+++ b/drivers/net/ethernet/ibm/emac/tah.c
@@ -90,28 +90,25 @@ static int tah_probe(struct platform_device *ofdev)
 	struct device_node *np = ofdev->dev.of_node;
 	struct tah_instance *dev;
 	struct resource regs;
-	int rc;
 
-	rc = -ENOMEM;
-	dev = kzalloc(sizeof(struct tah_instance), GFP_KERNEL);
-	if (dev == NULL)
-		goto err_gone;
+	dev = devm_kzalloc(&ofdev->dev, sizeof(struct tah_instance),
+			   GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
 
 	mutex_init(&dev->lock);
 	dev->ofdev = ofdev;
 
-	rc = -ENXIO;
 	if (of_address_to_resource(np, 0, &regs)) {
 		printk(KERN_ERR "%pOF: Can't get registers address\n", np);
-		goto err_free;
+		return -ENXIO;
 	}
 
-	rc = -ENOMEM;
 	dev->base = (struct tah_regs __iomem *)ioremap(regs.start,
 					       sizeof(struct tah_regs));
 	if (dev->base == NULL) {
 		printk(KERN_ERR "%pOF: Can't map device registers!\n", np);
-		goto err_free;
+		return -ENOMEM;
 	}
 
 	platform_set_drvdata(ofdev, dev);
@@ -123,11 +120,6 @@ static int tah_probe(struct platform_device *ofdev)
 	wmb();
 
 	return 0;
-
- err_free:
-	kfree(dev);
- err_gone:
-	return rc;
 }
 
 static void tah_remove(struct platform_device *ofdev)
@@ -137,7 +129,6 @@ static void tah_remove(struct platform_device *ofdev)
 	WARN_ON(dev->users != 0);
 
 	iounmap(dev->base);
-	kfree(dev);
 }
 
 static const struct of_device_id tah_match[] =
-- 
2.46.2

[PATCH net-next v3 08/17] net: ibm: emac: tah: devm_platform_get_resources

[Rosen Penev]

Simplifies the probe function by a bit and allows removing the _remove
function such that devm now handles all cleanup.

printk gets converted to dev_err as np is now gone.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/tah.c | 26 ++++----------------------
 1 file changed, 4 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/tah.c b/drivers/net/ethernet/ibm/emac/tah.c
index 03e0a4445569..27c1b3f77125 100644
--- a/drivers/net/ethernet/ibm/emac/tah.c
+++ b/drivers/net/ethernet/ibm/emac/tah.c
@@ -87,9 +87,7 @@ void *tah_dump_regs(struct platform_device *ofdev, void *buf)
 
 static int tah_probe(struct platform_device *ofdev)
 {
-	struct device_node *np = ofdev->dev.of_node;
 	struct tah_instance *dev;
-	struct resource regs;
 
 	dev = devm_kzalloc(&ofdev->dev, sizeof(struct tah_instance),
 			   GFP_KERNEL);
@@ -99,16 +97,10 @@ static int tah_probe(struct platform_device *ofdev)
 	mutex_init(&dev->lock);
 	dev->ofdev = ofdev;
 
-	if (of_address_to_resource(np, 0, &regs)) {
-		printk(KERN_ERR "%pOF: Can't get registers address\n", np);
-		return -ENXIO;
-	}
-
-	dev->base = (struct tah_regs __iomem *)ioremap(regs.start,
-					       sizeof(struct tah_regs));
-	if (dev->base == NULL) {
-		printk(KERN_ERR "%pOF: Can't map device registers!\n", np);
-		return -ENOMEM;
+	dev->base = devm_platform_ioremap_resource(ofdev, 0);
+	if (IS_ERR(dev->base)) {
+		dev_err(&ofdev->dev, "can't map device registers");
+		return PTR_ERR(dev->base);
 	}
 
 	platform_set_drvdata(ofdev, dev);
@@ -122,15 +114,6 @@ static int tah_probe(struct platform_device *ofdev)
 	return 0;
 }
 
-static void tah_remove(struct platform_device *ofdev)
-{
-	struct tah_instance *dev = platform_get_drvdata(ofdev);
-
-	WARN_ON(dev->users != 0);
-
-	iounmap(dev->base);
-}
-
 static const struct of_device_id tah_match[] =
 {
 	{
@@ -149,7 +132,6 @@ static struct platform_driver tah_driver = {
 		.of_match_table = tah_match,
 	},
 	.probe = tah_probe,
-	.remove_new = tah_remove,
 };
 
 module_platform_driver(tah_driver);
-- 
2.46.2

[PATCH net-next v3 09/17] net: ibm: emac: rgmii: use devm for kzalloc

[Rosen Penev]

Simplifies the probe function by removing gotos.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/rgmii.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/rgmii.c b/drivers/net/ethernet/ibm/emac/rgmii.c
index 52f080661f87..8c646a5e5c56 100644
--- a/drivers/net/ethernet/ibm/emac/rgmii.c
+++ b/drivers/net/ethernet/ibm/emac/rgmii.c
@@ -219,28 +219,25 @@ static int rgmii_probe(struct platform_device *ofdev)
 	struct device_node *np = ofdev->dev.of_node;
 	struct rgmii_instance *dev;
 	struct resource regs;
-	int rc;
 
-	rc = -ENOMEM;
-	dev = kzalloc(sizeof(struct rgmii_instance), GFP_KERNEL);
-	if (dev == NULL)
-		goto err_gone;
+	dev = devm_kzalloc(&ofdev->dev, sizeof(struct rgmii_instance),
+			   GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
 
 	mutex_init(&dev->lock);
 	dev->ofdev = ofdev;
 
-	rc = -ENXIO;
 	if (of_address_to_resource(np, 0, &regs)) {
 		printk(KERN_ERR "%pOF: Can't get registers address\n", np);
-		goto err_free;
+		return -ENXIO;
 	}
 
-	rc = -ENOMEM;
 	dev->base = (struct rgmii_regs __iomem *)ioremap(regs.start,
 						 sizeof(struct rgmii_regs));
 	if (dev->base == NULL) {
 		printk(KERN_ERR "%pOF: Can't map device registers!\n", np);
-		goto err_free;
+		return -ENOMEM;
 	}
 
 	/* Check for RGMII flags */
@@ -266,11 +263,6 @@ static int rgmii_probe(struct platform_device *ofdev)
 	platform_set_drvdata(ofdev, dev);
 
 	return 0;
-
- err_free:
-	kfree(dev);
- err_gone:
-	return rc;
 }
 
 static void rgmii_remove(struct platform_device *ofdev)
@@ -280,7 +272,6 @@ static void rgmii_remove(struct platform_device *ofdev)
 	WARN_ON(dev->users != 0);
 
 	iounmap(dev->base);
-	kfree(dev);
 }
 
 static const struct of_device_id rgmii_match[] =
-- 
2.46.2

[PATCH net-next v3 10/17] net: ibm: emac: rgmii: devm_platform_get_resource

[Rosen Penev]

Simplifies the probe function by a bit and allows removing the _remove
function such that devm now handles all cleanup.

printk gets converted to dev_err as np is now gone.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/rgmii.c | 26 ++++----------------------
 1 file changed, 4 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/rgmii.c b/drivers/net/ethernet/ibm/emac/rgmii.c
index 8c646a5e5c56..25a13a00a614 100644
--- a/drivers/net/ethernet/ibm/emac/rgmii.c
+++ b/drivers/net/ethernet/ibm/emac/rgmii.c
@@ -216,9 +216,7 @@ void *rgmii_dump_regs(struct platform_device *ofdev, void *buf)
 
 static int rgmii_probe(struct platform_device *ofdev)
 {
-	struct device_node *np = ofdev->dev.of_node;
 	struct rgmii_instance *dev;
-	struct resource regs;
 
 	dev = devm_kzalloc(&ofdev->dev, sizeof(struct rgmii_instance),
 			   GFP_KERNEL);
@@ -228,16 +226,10 @@ static int rgmii_probe(struct platform_device *ofdev)
 	mutex_init(&dev->lock);
 	dev->ofdev = ofdev;
 
-	if (of_address_to_resource(np, 0, &regs)) {
-		printk(KERN_ERR "%pOF: Can't get registers address\n", np);
-		return -ENXIO;
-	}
-
-	dev->base = (struct rgmii_regs __iomem *)ioremap(regs.start,
-						 sizeof(struct rgmii_regs));
-	if (dev->base == NULL) {
-		printk(KERN_ERR "%pOF: Can't map device registers!\n", np);
-		return -ENOMEM;
+	dev->base = devm_platform_ioremap_resource(ofdev, 0);
+	if (IS_ERR(dev->base)) {
+		dev_err(&ofdev->dev, "can't map device registers");
+		return PTR_ERR(dev->base);
 	}
 
 	/* Check for RGMII flags */
@@ -265,15 +257,6 @@ static int rgmii_probe(struct platform_device *ofdev)
 	return 0;
 }
 
-static void rgmii_remove(struct platform_device *ofdev)
-{
-	struct rgmii_instance *dev = platform_get_drvdata(ofdev);
-
-	WARN_ON(dev->users != 0);
-
-	iounmap(dev->base);
-}
-
 static const struct of_device_id rgmii_match[] =
 {
 	{
@@ -291,7 +274,6 @@ static struct platform_driver rgmii_driver = {
 		.of_match_table = rgmii_match,
 	},
 	.probe = rgmii_probe,
-	.remove_new = rgmii_remove,
 };
 
 module_platform_driver(rgmii_driver);
-- 
2.46.2

[PATCH net-next v3 11/17] net: ibm: emac: zmii: use devm for kzalloc

[Rosen Penev]

Simplifies the probe function by removing gotos.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/zmii.c | 23 +++++++----------------
 1 file changed, 7 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/zmii.c b/drivers/net/ethernet/ibm/emac/zmii.c
index 97cea64abe55..c38eb6b3173e 100644
--- a/drivers/net/ethernet/ibm/emac/zmii.c
+++ b/drivers/net/ethernet/ibm/emac/zmii.c
@@ -235,29 +235,26 @@ static int zmii_probe(struct platform_device *ofdev)
 	struct device_node *np = ofdev->dev.of_node;
 	struct zmii_instance *dev;
 	struct resource regs;
-	int rc;
 
-	rc = -ENOMEM;
-	dev = kzalloc(sizeof(struct zmii_instance), GFP_KERNEL);
-	if (dev == NULL)
-		goto err_gone;
+	dev = devm_kzalloc(&ofdev->dev, sizeof(struct zmii_instance),
+			   GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
 
 	mutex_init(&dev->lock);
 	dev->ofdev = ofdev;
 	dev->mode = PHY_INTERFACE_MODE_NA;
 
-	rc = -ENXIO;
 	if (of_address_to_resource(np, 0, &regs)) {
 		printk(KERN_ERR "%pOF: Can't get registers address\n", np);
-		goto err_free;
+		return -ENXIO;
 	}
 
-	rc = -ENOMEM;
 	dev->base = (struct zmii_regs __iomem *)ioremap(regs.start,
 						sizeof(struct zmii_regs));
-	if (dev->base == NULL) {
+	if (!dev->base) {
 		printk(KERN_ERR "%pOF: Can't map device registers!\n", np);
-		goto err_free;
+		return -ENOMEM;
 	}
 
 	/* We may need FER value for autodetection later */
@@ -271,11 +268,6 @@ static int zmii_probe(struct platform_device *ofdev)
 	platform_set_drvdata(ofdev, dev);
 
 	return 0;
-
- err_free:
-	kfree(dev);
- err_gone:
-	return rc;
 }
 
 static void zmii_remove(struct platform_device *ofdev)
@@ -285,7 +277,6 @@ static void zmii_remove(struct platform_device *ofdev)
 	WARN_ON(dev->users != 0);
 
 	iounmap(dev->base);
-	kfree(dev);
 }
 
 static const struct of_device_id zmii_match[] =
-- 
2.46.2

[PATCH net-next v3 12/17] net: ibm: emac: zmii: devm_platform_get_resource

[Rosen Penev]

Simplifies the probe function by a bit and allows removing the _remove
function such that devm now handles all cleanup.

printk gets converted to dev_err as np is now gone.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/zmii.c | 26 ++++----------------------
 1 file changed, 4 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/zmii.c b/drivers/net/ethernet/ibm/emac/zmii.c
index c38eb6b3173e..abe14f4a8ea6 100644
--- a/drivers/net/ethernet/ibm/emac/zmii.c
+++ b/drivers/net/ethernet/ibm/emac/zmii.c
@@ -232,9 +232,7 @@ void *zmii_dump_regs(struct platform_device *ofdev, void *buf)
 
 static int zmii_probe(struct platform_device *ofdev)
 {
-	struct device_node *np = ofdev->dev.of_node;
 	struct zmii_instance *dev;
-	struct resource regs;
 
 	dev = devm_kzalloc(&ofdev->dev, sizeof(struct zmii_instance),
 			   GFP_KERNEL);
@@ -245,16 +243,10 @@ static int zmii_probe(struct platform_device *ofdev)
 	dev->ofdev = ofdev;
 	dev->mode = PHY_INTERFACE_MODE_NA;
 
-	if (of_address_to_resource(np, 0, &regs)) {
-		printk(KERN_ERR "%pOF: Can't get registers address\n", np);
-		return -ENXIO;
-	}
-
-	dev->base = (struct zmii_regs __iomem *)ioremap(regs.start,
-						sizeof(struct zmii_regs));
-	if (!dev->base) {
-		printk(KERN_ERR "%pOF: Can't map device registers!\n", np);
-		return -ENOMEM;
+	dev->base = devm_platform_ioremap_resource(ofdev, 0);
+	if (IS_ERR(dev->base)) {
+		dev_err(&ofdev->dev, "can't map device registers");
+		return PTR_ERR(dev->base);
 	}
 
 	/* We may need FER value for autodetection later */
@@ -270,15 +262,6 @@ static int zmii_probe(struct platform_device *ofdev)
 	return 0;
 }
 
-static void zmii_remove(struct platform_device *ofdev)
-{
-	struct zmii_instance *dev = platform_get_drvdata(ofdev);
-
-	WARN_ON(dev->users != 0);
-
-	iounmap(dev->base);
-}
-
 static const struct of_device_id zmii_match[] =
 {
 	{
@@ -297,7 +280,6 @@ static struct platform_driver zmii_driver = {
 		.of_match_table = zmii_match,
 	},
 	.probe = zmii_probe,
-	.remove_new = zmii_remove,
 };
 
 module_platform_driver(zmii_driver);
-- 
2.46.2

[PATCH net-next v3 13/17] net: ibm: emac: mal: use devm for kzalloc

[Rosen Penev]

Simplifies the probe function by removing gotos.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/mal.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c
index a632d3a207d3..70019ced47ff 100644
--- a/drivers/net/ethernet/ibm/emac/mal.c
+++ b/drivers/net/ethernet/ibm/emac/mal.c
@@ -524,7 +524,8 @@ static int mal_probe(struct platform_device *ofdev)
 	unsigned long irqflags;
 	irq_handler_t hdlr_serr, hdlr_txde, hdlr_rxde;
 
-	mal = kzalloc(sizeof(struct mal_instance), GFP_KERNEL);
+	mal = devm_kzalloc(&ofdev->dev, sizeof(struct mal_instance),
+			   GFP_KERNEL);
 	if (!mal)
 		return -ENOMEM;
 
@@ -539,8 +540,7 @@ static int mal_probe(struct platform_device *ofdev)
 		printk(KERN_ERR
 		       "mal%d: can't find MAL num-tx-chans property!\n",
 		       index);
-		err = -ENODEV;
-		goto fail;
+		return -ENODEV;
 	}
 	mal->num_tx_chans = prop[0];
 
@@ -549,8 +549,7 @@ static int mal_probe(struct platform_device *ofdev)
 		printk(KERN_ERR
 		       "mal%d: can't find MAL num-rx-chans property!\n",
 		       index);
-		err = -ENODEV;
-		goto fail;
+		return -ENODEV;
 	}
 	mal->num_rx_chans = prop[0];
 
@@ -558,15 +557,13 @@ static int mal_probe(struct platform_device *ofdev)
 	if (dcr_base == 0) {
 		printk(KERN_ERR
 		       "mal%d: can't find DCR resource!\n", index);
-		err = -ENODEV;
-		goto fail;
+		return -ENODEV;
 	}
 	mal->dcr_host = dcr_map(ofdev->dev.of_node, dcr_base, 0x100);
 	if (!DCR_MAP_OK(mal->dcr_host)) {
 		printk(KERN_ERR
 		       "mal%d: failed to map DCRs !\n", index);
-		err = -ENODEV;
-		goto fail;
+		return -ENODEV;
 	}
 
 	if (of_device_is_compatible(ofdev->dev.of_node, "ibm,mcmal-405ez")) {
@@ -577,8 +574,7 @@ static int mal_probe(struct platform_device *ofdev)
 #else
 		printk(KERN_ERR "%pOF: Support for 405EZ not enabled!\n",
 				ofdev->dev.of_node);
-		err = -ENODEV;
-		goto fail;
+		return -ENODEV;
 #endif
 	}
 
@@ -711,9 +707,6 @@ static int mal_probe(struct platform_device *ofdev)
 	free_netdev(mal->dummy_dev);
  fail_unmap:
 	dcr_unmap(mal->dcr_host, 0x100);
- fail:
-	kfree(mal);
-
 	return err;
 }
 
@@ -744,10 +737,9 @@ static void mal_remove(struct platform_device *ofdev)
 
 	dma_free_coherent(&ofdev->dev,
 			  sizeof(struct mal_descriptor) *
-			  (NUM_TX_BUFF * mal->num_tx_chans +
-			   NUM_RX_BUFF * mal->num_rx_chans), mal->bd_virt,
-			  mal->bd_dma);
-	kfree(mal);
+				  (NUM_TX_BUFF * mal->num_tx_chans +
+				   NUM_RX_BUFF * mal->num_rx_chans),
+			  mal->bd_virt, mal->bd_dma);
 }
 
 static const struct of_device_id mal_platform_match[] =
-- 
2.46.2

[PATCH net-next v3 14/17] net: ibm: emac: mal: use devm for request_irq

[Rosen Penev]

Avoids manual frees. Also replaced irq_of_parse_and_map with
platform_get_irq since it's simpler and does the same thing.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/mal.c | 51 ++++++++++++-----------------
 1 file changed, 21 insertions(+), 30 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c
index 70019ced47ff..b07b2e0ce478 100644
--- a/drivers/net/ethernet/ibm/emac/mal.c
+++ b/drivers/net/ethernet/ibm/emac/mal.c
@@ -578,19 +578,19 @@ static int mal_probe(struct platform_device *ofdev)
 #endif
 	}
 
-	mal->txeob_irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
-	mal->rxeob_irq = irq_of_parse_and_map(ofdev->dev.of_node, 1);
-	mal->serr_irq = irq_of_parse_and_map(ofdev->dev.of_node, 2);
+	mal->txeob_irq = platform_get_irq(ofdev, 0);
+	mal->rxeob_irq = platform_get_irq(ofdev, 1);
+	mal->serr_irq = platform_get_irq(ofdev, 2);
 
 	if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) {
 		mal->txde_irq = mal->rxde_irq = mal->serr_irq;
 	} else {
-		mal->txde_irq = irq_of_parse_and_map(ofdev->dev.of_node, 3);
-		mal->rxde_irq = irq_of_parse_and_map(ofdev->dev.of_node, 4);
+		mal->txde_irq = platform_get_irq(ofdev, 3);
+		mal->rxde_irq = platform_get_irq(ofdev, 4);
 	}
 
-	if (!mal->txeob_irq || !mal->rxeob_irq || !mal->serr_irq ||
-	    !mal->txde_irq  || !mal->rxde_irq) {
+	if (mal->txeob_irq < 0 || mal->rxeob_irq < 0 || mal->serr_irq < 0 ||
+	    mal->txde_irq < 0 || mal->rxde_irq < 0) {
 		printk(KERN_ERR
 		       "mal%d: failed to map interrupts !\n", index);
 		err = -ENODEV;
@@ -660,21 +660,26 @@ static int mal_probe(struct platform_device *ofdev)
 		hdlr_rxde = mal_rxde;
 	}
 
-	err = request_irq(mal->serr_irq, hdlr_serr, irqflags, "MAL SERR", mal);
+	err = devm_request_irq(&ofdev->dev, mal->serr_irq, hdlr_serr, irqflags,
+			       "MAL SERR", mal);
 	if (err)
 		goto fail2;
-	err = request_irq(mal->txde_irq, hdlr_txde, irqflags, "MAL TX DE", mal);
+	err = devm_request_irq(&ofdev->dev, mal->txde_irq, hdlr_txde, irqflags,
+			       "MAL TX DE", mal);
 	if (err)
-		goto fail3;
-	err = request_irq(mal->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
+		goto fail2;
+	err = devm_request_irq(&ofdev->dev, mal->txeob_irq, mal_txeob, 0,
+			       "MAL TX EOB", mal);
 	if (err)
-		goto fail4;
-	err = request_irq(mal->rxde_irq, hdlr_rxde, irqflags, "MAL RX DE", mal);
+		goto fail2;
+	err = devm_request_irq(&ofdev->dev, mal->rxde_irq, hdlr_rxde, irqflags,
+			       "MAL RX DE", mal);
 	if (err)
-		goto fail5;
-	err = request_irq(mal->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);
+		goto fail2;
+	err = devm_request_irq(&ofdev->dev, mal->rxeob_irq, mal_rxeob, 0,
+			       "MAL RX EOB", mal);
 	if (err)
-		goto fail6;
+		goto fail2;
 
 	/* Enable all MAL SERR interrupt sources */
 	set_mal_dcrn(mal, MAL_IER, MAL_IER_EVENTS);
@@ -693,14 +698,6 @@ static int mal_probe(struct platform_device *ofdev)
 
 	return 0;
 
- fail6:
-	free_irq(mal->rxde_irq, mal);
- fail5:
-	free_irq(mal->txeob_irq, mal);
- fail4:
-	free_irq(mal->txde_irq, mal);
- fail3:
-	free_irq(mal->serr_irq, mal);
  fail2:
 	dma_free_coherent(&ofdev->dev, bd_size, mal->bd_virt, mal->bd_dma);
  fail_dummy:
@@ -725,12 +722,6 @@ static void mal_remove(struct platform_device *ofdev)
 		       "mal%d: commac list is not empty on remove!\n",
 		       mal->index);
 
-	free_irq(mal->serr_irq, mal);
-	free_irq(mal->txde_irq, mal);
-	free_irq(mal->txeob_irq, mal);
-	free_irq(mal->rxde_irq, mal);
-	free_irq(mal->rxeob_irq, mal);
-
 	mal_reset(mal);
 
 	free_netdev(mal->dummy_dev);
-- 
2.46.2

[PATCH net-next v3 15/17] net: ibm: emac: mal: move irq maps down

[Rosen Penev]

Moves the handling right before they are used and allows merging a
branch.

Also get rid of the error handling as devm_request_irq can handle that.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/mal.c | 26 +++++++-------------------
 1 file changed, 7 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c
index b07b2e0ce478..3fae1f0ec020 100644
--- a/drivers/net/ethernet/ibm/emac/mal.c
+++ b/drivers/net/ethernet/ibm/emac/mal.c
@@ -578,25 +578,6 @@ static int mal_probe(struct platform_device *ofdev)
 #endif
 	}
 
-	mal->txeob_irq = platform_get_irq(ofdev, 0);
-	mal->rxeob_irq = platform_get_irq(ofdev, 1);
-	mal->serr_irq = platform_get_irq(ofdev, 2);
-
-	if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) {
-		mal->txde_irq = mal->rxde_irq = mal->serr_irq;
-	} else {
-		mal->txde_irq = platform_get_irq(ofdev, 3);
-		mal->rxde_irq = platform_get_irq(ofdev, 4);
-	}
-
-	if (mal->txeob_irq < 0 || mal->rxeob_irq < 0 || mal->serr_irq < 0 ||
-	    mal->txde_irq < 0 || mal->rxde_irq < 0) {
-		printk(KERN_ERR
-		       "mal%d: failed to map interrupts !\n", index);
-		err = -ENODEV;
-		goto fail_unmap;
-	}
-
 	INIT_LIST_HEAD(&mal->poll_list);
 	INIT_LIST_HEAD(&mal->list);
 	spin_lock_init(&mal->lock);
@@ -650,10 +631,17 @@ static int mal_probe(struct platform_device *ofdev)
 			     sizeof(struct mal_descriptor) *
 			     mal_rx_bd_offset(mal, i));
 
+	mal->txeob_irq = platform_get_irq(ofdev, 0);
+	mal->rxeob_irq = platform_get_irq(ofdev, 1);
+	mal->serr_irq = platform_get_irq(ofdev, 2);
+
 	if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) {
+		mal->txde_irq = mal->rxde_irq = mal->serr_irq;
 		irqflags = IRQF_SHARED;
 		hdlr_serr = hdlr_txde = hdlr_rxde = mal_int;
 	} else {
+		mal->txde_irq = platform_get_irq(ofdev, 3);
+		mal->rxde_irq = platform_get_irq(ofdev, 4);
 		irqflags = 0;
 		hdlr_serr = mal_serr;
 		hdlr_txde = mal_txde;
-- 
2.46.2

[PATCH net-next v3 16/17] net: ibm: emac: mal: add dcr_unmap to _remove

[Rosen Penev]

It's done in probe so it should be done here.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/mal.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c
index 3fae1f0ec020..4f58a38f4b32 100644
--- a/drivers/net/ethernet/ibm/emac/mal.c
+++ b/drivers/net/ethernet/ibm/emac/mal.c
@@ -714,6 +714,8 @@ static void mal_remove(struct platform_device *ofdev)
 
 	free_netdev(mal->dummy_dev);
 
+	dcr_unmap(mal->dcr_host, 0x100);
+
 	dma_free_coherent(&ofdev->dev,
 			  sizeof(struct mal_descriptor) *
 				  (NUM_TX_BUFF * mal->num_tx_chans +
-- 
2.46.2

[PATCH net-next v3 17/17] net: ibm: emac: mal: move dcr map down

[Rosen Penev]

There's actually a bug above where it returns instead of calling goto.
Instead of calling goto, move dcr_map and friends down as they're used
right after the spinlock in mal_reset.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/ethernet/ibm/emac/mal.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c
index 4f58a38f4b32..e6354843d856 100644
--- a/drivers/net/ethernet/ibm/emac/mal.c
+++ b/drivers/net/ethernet/ibm/emac/mal.c
@@ -553,6 +553,18 @@ static int mal_probe(struct platform_device *ofdev)
 	}
 	mal->num_rx_chans = prop[0];
 
+	if (of_device_is_compatible(ofdev->dev.of_node, "ibm,mcmal-405ez")) {
+#if defined(CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT) && \
+		defined(CONFIG_IBM_EMAC_MAL_COMMON_ERR)
+		mal->features |= (MAL_FTR_CLEAR_ICINTSTAT |
+				MAL_FTR_COMMON_ERR_INT);
+#else
+		printk(KERN_ERR "%pOF: Support for 405EZ not enabled!\n",
+				ofdev->dev.of_node);
+		return -ENODEV;
+#endif
+	}
+
 	dcr_base = dcr_resource_start(ofdev->dev.of_node, 0);
 	if (dcr_base == 0) {
 		printk(KERN_ERR
@@ -566,18 +578,6 @@ static int mal_probe(struct platform_device *ofdev)
 		return -ENODEV;
 	}
 
-	if (of_device_is_compatible(ofdev->dev.of_node, "ibm,mcmal-405ez")) {
-#if defined(CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT) && \
-		defined(CONFIG_IBM_EMAC_MAL_COMMON_ERR)
-		mal->features |= (MAL_FTR_CLEAR_ICINTSTAT |
-				MAL_FTR_COMMON_ERR_INT);
-#else
-		printk(KERN_ERR "%pOF: Support for 405EZ not enabled!\n",
-				ofdev->dev.of_node);
-		return -ENODEV;
-#endif
-	}
-
 	INIT_LIST_HEAD(&mal->poll_list);
 	INIT_LIST_HEAD(&mal->list);
 	spin_lock_init(&mal->lock);
-- 
2.46.2

Re: [PATCH net-next v3 02/17] net: ibm: emac: remove custom init/exit functions

[Jakub Kicinski]

On Wed,  2 Oct 2024 19:11:20 -0700 Rosen Penev wrote:
> Now that we're using EPROBE_DEFER, we don't have to do custom
> initialization and we can let the core handle this for us.

Could you add a reference for this "now"? Which commit changes things?

Re: [PATCH net-next v3 03/17] net: ibm: emac: use module_platform_driver for modules

[Jakub Kicinski]

On Wed,  2 Oct 2024 19:11:21 -0700 Rosen Penev wrote:
> These init and exit functions don't do anything special. Just macro it
> away.
> 
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
>  drivers/net/ethernet/ibm/emac/mal.c   | 10 +---------
>  drivers/net/ethernet/ibm/emac/rgmii.c | 10 +---------
>  drivers/net/ethernet/ibm/emac/tah.c   | 10 +---------
>  drivers/net/ethernet/ibm/emac/zmii.c  | 10 +---------
>  4 files changed, 4 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c
> index d92dd9c83031..a632d3a207d3 100644
> --- a/drivers/net/ethernet/ibm/emac/mal.c
> +++ b/drivers/net/ethernet/ibm/emac/mal.c
> @@ -779,12 +779,4 @@ static struct platform_driver mal_of_driver = {
>  	.remove_new = mal_remove,
>  };
>  
> -int __init mal_init(void)
> -{
> -	return platform_driver_register(&mal_of_driver);
> -}
> -
> -void mal_exit(void)
> -{
> -	platform_driver_unregister(&mal_of_driver);
> -}
> +module_platform_driver(mal_of_driver);

This is not 1:1, right? We're now implicitly adding module_init()
module_exit() annotations which weren't there before. Needs to be
at least mentioned in the commit msg.

Re: [PATCH net-next v3 00/17] ibm: emac: more cleanups

[Jakub Kicinski]

On Wed,  2 Oct 2024 19:11:18 -0700 Rosen Penev wrote:
> Tested on Cisco MX60W.

Thanks for including this info.
Looks like there are various "sub drivers" in emac.
Which one(s) is Cisco MX60W using / exercising?

Re: [PATCH net-next v3 06/17] net: ibm: emac: remove bootlist support

[Jakub Kicinski]

On Wed,  2 Oct 2024 19:11:24 -0700 Rosen Penev wrote:
> This seems to be mainly used for deterministic interfaces. systemd
> already does this in userspace.

I guess.. but what gives you the confidence this is not going to cause
a regression for people? There's certainly plenty of machines with
"stable naming" disabled. Whether that's wise or not is a separate
question..

Re: [PATCH net-next v3 16/17] net: ibm: emac: mal: add dcr_unmap to _remove

[Jakub Kicinski]

On Wed,  2 Oct 2024 19:11:34 -0700 Rosen Penev wrote:
> It's done in probe so it should be done here.

second done -> undone ?
Also is this not a bug fix?

Re: [PATCH net-next v3 17/17] net: ibm: emac: mal: move dcr map down

[Jakub Kicinski]

On Wed,  2 Oct 2024 19:11:35 -0700 Rosen Penev wrote:
> There's actually a bug above where it returns instead of calling goto.
> Instead of calling goto, move dcr_map and friends down as they're used
> right after the spinlock in mal_reset.

Not a fix?

Re: [PATCH net-next v3 00/17] ibm: emac: more cleanups

[Jakub Kicinski]

On Wed,  2 Oct 2024 19:11:18 -0700 Rosen Penev wrote:
> Rosen Penev (17):

17 is too many, I see no reason why these have to all be posted at once.

Re: [PATCH net-next v3 00/17] ibm: emac: more cleanups

[Rosen Penev]

On Fri, Oct 4, 2024 at 4:32 PM Jakub Kicinski <kuba@kernel.org> wrote:
>
> On Wed,  2 Oct 2024 19:11:18 -0700 Rosen Penev wrote:
> > Tested on Cisco MX60W.
>
> Thanks for including this info.
> Looks like there are various "sub drivers" in emac.
> Which one(s) is Cisco MX60W using / exercising?
All except zmii. That's for 100Mbit ports AFAIK. Cisco MX60W has only
gigabit ones.

Re: [PATCH net-next v3 17/17] net: ibm: emac: mal: move dcr map down

[Rosen Penev]

On Fri, Oct 4, 2024 at 4:36 PM Jakub Kicinski <kuba@kernel.org> wrote:
>
> On Wed,  2 Oct 2024 19:11:35 -0700 Rosen Penev wrote:
> > There's actually a bug above where it returns instead of calling goto.
> > Instead of calling goto, move dcr_map and friends down as they're used
> > right after the spinlock in mal_reset.
>
> Not a fix?
It's a fix for a prior commit, yes. 6d3ba097ee81d if I'm using git
blame correctly.

Re: [PATCH net-next v3 16/17] net: ibm: emac: mal: add dcr_unmap to _remove

[Rosen Penev]

On Fri, Oct 4, 2024 at 4:35 PM Jakub Kicinski <kuba@kernel.org> wrote:
>
> On Wed,  2 Oct 2024 19:11:34 -0700 Rosen Penev wrote:
> > It's done in probe so it should be done here.
>
> second done -> undone ?
> Also is this not a bug fix?
Correct. Looking at git blame dcr_unmap has never been in remove.

Re: [PATCH net-next v3 03/17] net: ibm: emac: use module_platform_driver for modules

[Rosen Penev]

On Fri, Oct 4, 2024 at 4:32 PM Jakub Kicinski <kuba@kernel.org> wrote:
>
> On Wed,  2 Oct 2024 19:11:21 -0700 Rosen Penev wrote:
> > These init and exit functions don't do anything special. Just macro it
> > away.
> >
> > Signed-off-by: Rosen Penev <rosenp@gmail.com>
> > ---
> >  drivers/net/ethernet/ibm/emac/mal.c   | 10 +---------
> >  drivers/net/ethernet/ibm/emac/rgmii.c | 10 +---------
> >  drivers/net/ethernet/ibm/emac/tah.c   | 10 +---------
> >  drivers/net/ethernet/ibm/emac/zmii.c  | 10 +---------
> >  4 files changed, 4 insertions(+), 36 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c
> > index d92dd9c83031..a632d3a207d3 100644
> > --- a/drivers/net/ethernet/ibm/emac/mal.c
> > +++ b/drivers/net/ethernet/ibm/emac/mal.c
> > @@ -779,12 +779,4 @@ static struct platform_driver mal_of_driver = {
> >       .remove_new = mal_remove,
> >  };
> >
> > -int __init mal_init(void)
> > -{
> > -     return platform_driver_register(&mal_of_driver);
> > -}
> > -
> > -void mal_exit(void)
> > -{
> > -     platform_driver_unregister(&mal_of_driver);
> > -}
> > +module_platform_driver(mal_of_driver);
>
> This is not 1:1, right? We're now implicitly adding module_init()
> module_exit() annotations which weren't there before. Needs to be
> at least mentioned in the commit msg.
Sure. The prior commit removes direct usage by core.c of these functions.

Re: [PATCH net-next v3 06/17] net: ibm: emac: remove bootlist support

[Rosen Penev]

On Fri, Oct 4, 2024 at 4:34 PM Jakub Kicinski <kuba@kernel.org> wrote:
>
> On Wed,  2 Oct 2024 19:11:24 -0700 Rosen Penev wrote:
> > This seems to be mainly used for deterministic interfaces. systemd
> > already does this in userspace.
>
> I guess.. but what gives you the confidence this is not going to cause
> a regression for people? There's certainly plenty of machines with
> "stable naming" disabled. Whether that's wise or not is a separate
> question..
The ultimate goal was to remove custom init/exit functions. Although I
could just move all of this logic to probe...

Re: [PATCH net-next v3 03/17] net: ibm: emac: use module_platform_driver for modules

[kernel test robot]

Hi Rosen,

kernel test robot noticed the following build errors:

[auto build test ERROR on net-next/main]

url:    https://github.com/intel-lab-lkp/linux/commits/Rosen-Penev/net-ibm-emac-use-netif_receive_skb_list/20241003-101754
base:   net-next/main
patch link:    https://lore.kernel.org/r/20241003021135.1952928-4-rosenp%40gmail.com
patch subject: [PATCH net-next v3 03/17] net: ibm: emac: use module_platform_driver for modules
config: powerpc-allmodconfig (https://download.01.org/0day-ci/archive/20241006/202410061910.his99w1N-lkp@intel.com/config)
compiler: powerpc64-linux-gcc (GCC) 14.1.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241006/202410061910.his99w1N-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202410061910.his99w1N-lkp@intel.com/

All errors (new ones prefixed by >>):

   powerpc64-linux-ld: drivers/net/ethernet/ibm/emac/core.o: in function `emac_init':
>> core.c:(.init.text+0x8): multiple definition of `init_module'; drivers/net/ethernet/ibm/emac/mal.o:mal.c:(.init.text+0x8): first defined here
   powerpc64-linux-ld: drivers/net/ethernet/ibm/emac/core.o: in function `emac_exit':
>> core.c:(.exit.text+0x8): multiple definition of `cleanup_module'; drivers/net/ethernet/ibm/emac/mal.o:mal.c:(.exit.text+0x8): first defined here
   powerpc64-linux-ld: drivers/net/ethernet/ibm/emac/zmii.o: in function `zmii_driver_init':
   zmii.c:(.init.text+0x8): multiple definition of `init_module'; drivers/net/ethernet/ibm/emac/mal.o:mal.c:(.init.text+0x8): first defined here
   powerpc64-linux-ld: drivers/net/ethernet/ibm/emac/zmii.o: in function `zmii_driver_exit':
   zmii.c:(.exit.text+0x8): multiple definition of `cleanup_module'; drivers/net/ethernet/ibm/emac/mal.o:mal.c:(.exit.text+0x8): first defined here
   powerpc64-linux-ld: drivers/net/ethernet/ibm/emac/rgmii.o: in function `rgmii_driver_init':
   rgmii.c:(.init.text+0x8): multiple definition of `init_module'; drivers/net/ethernet/ibm/emac/mal.o:mal.c:(.init.text+0x8): first defined here
   powerpc64-linux-ld: drivers/net/ethernet/ibm/emac/rgmii.o: in function `rgmii_driver_exit':
   rgmii.c:(.exit.text+0x8): multiple definition of `cleanup_module'; drivers/net/ethernet/ibm/emac/mal.o:mal.c:(.exit.text+0x8): first defined here
   powerpc64-linux-ld: drivers/net/ethernet/ibm/emac/tah.o: in function `tah_driver_init':
   tah.c:(.init.text+0x8): multiple definition of `init_module'; drivers/net/ethernet/ibm/emac/mal.o:mal.c:(.init.text+0x8): first defined here
   powerpc64-linux-ld: drivers/net/ethernet/ibm/emac/tah.o: in function `tah_driver_exit':
   tah.c:(.exit.text+0x8): multiple definition of `cleanup_module'; drivers/net/ethernet/ibm/emac/mal.o:mal.c:(.exit.text+0x8): first defined here

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [PATCH net-next v3 03/17] net: ibm: emac: use module_platform_driver for modules

[kernel test robot]

Hi Rosen,

kernel test robot noticed the following build errors:

[auto build test ERROR on net-next/main]

url:    https://github.com/intel-lab-lkp/linux/commits/Rosen-Penev/net-ibm-emac-use-netif_receive_skb_list/20241003-101754
base:   net-next/main
patch link:    https://lore.kernel.org/r/20241003021135.1952928-4-rosenp%40gmail.com
patch subject: [PATCH net-next v3 03/17] net: ibm: emac: use module_platform_driver for modules
config: powerpc-fsp2_defconfig (https://download.01.org/0day-ci/archive/20241007/202410070205.fxayDTTJ-lkp@intel.com/config)
compiler: powerpc-linux-gcc (GCC) 13.3.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241007/202410070205.fxayDTTJ-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202410070205.fxayDTTJ-lkp@intel.com/

All errors (new ones prefixed by >>):

   powerpc-linux-ld: drivers/net/ethernet/ibm/emac/core.o: in function `emac_init':
>> drivers/net/ethernet/ibm/emac/core.c:3285: multiple definition of `init_module'; drivers/net/ethernet/ibm/emac/mal.o:drivers/net/ethernet/ibm/emac/mal.c:782: first defined here
   powerpc-linux-ld: drivers/net/ethernet/ibm/emac/core.o: in function `emac_exit':
>> drivers/net/ethernet/ibm/emac/core.c:3293: multiple definition of `cleanup_module'; drivers/net/ethernet/ibm/emac/mal.o:drivers/net/ethernet/ibm/emac/mal.c:782: first defined here
   powerpc-linux-ld: drivers/net/ethernet/ibm/emac/rgmii.o: in function `rgmii_driver_init':
   drivers/net/ethernet/ibm/emac/rgmii.c:306: multiple definition of `init_module'; drivers/net/ethernet/ibm/emac/mal.o:drivers/net/ethernet/ibm/emac/mal.c:782: first defined here
   powerpc-linux-ld: drivers/net/ethernet/ibm/emac/rgmii.o: in function `rgmii_driver_exit':
   drivers/net/ethernet/ibm/emac/rgmii.c:306: multiple definition of `cleanup_module'; drivers/net/ethernet/ibm/emac/mal.o:drivers/net/ethernet/ibm/emac/mal.c:782: first defined here


vim +3285 drivers/net/ethernet/ibm/emac/core.c

1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3283  
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3284  static int __init emac_init(void)
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23 @3285  {
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3286  	/* Build EMAC boot list */
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3287  	emac_make_bootlist();
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3288  
c142fce2e67e1b drivers/net/ethernet/ibm/emac/core.c Rosen Penev  2024-10-02  3289  	return platform_driver_register(&emac_driver);
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3290  }
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3291  
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3292  static void __exit emac_exit(void)
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23 @3293  {
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3294  	int i;
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3295  
74888760d40b3a drivers/net/ibm_newemac/core.c       Grant Likely 2011-02-22  3296  	platform_driver_unregister(&emac_driver);
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3297  
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3298  	/* Destroy EMAC boot list */
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3299  	for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++)
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3300  		of_node_put(emac_boot_list[i]);
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3301  }
1d3bb996481e11 drivers/net/ibm_newemac/core.c       David Gibson 2007-08-23  3302  

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [PATCH net-next v3 17/17] net: ibm: emac: mal: move dcr map down

[Jakub Kicinski]

On Fri, 4 Oct 2024 16:43:48 -0700 Rosen Penev wrote:
> > On Wed,  2 Oct 2024 19:11:35 -0700 Rosen Penev wrote:  
> > > There's actually a bug above where it returns instead of calling goto.
> > > Instead of calling goto, move dcr_map and friends down as they're used
> > > right after the spinlock in mal_reset.  
> >
> > Not a fix?  
> It's a fix for a prior commit, yes. 6d3ba097ee81d if I'm using git
> blame correctly.

Hm, I don't have this hash in my local tree.
What I'm getting at is that if it's a fix for a patch already in
networking trees the patch needs to have a Fixes tag. And if the 
bug is present in net - the patch needs to go to net rather than
net-next.

Re: [PATCH net-next v3 17/17] net: ibm: emac: mal: move dcr map down

[Jakub Kicinski]

On Mon, 7 Oct 2024 07:05:14 -0700 Jakub Kicinski wrote:
> > > Not a fix?    
> > It's a fix for a prior commit, yes. 6d3ba097ee81d if I'm using git
> > blame correctly.  
> 
> Hm, I don't have this hash in my local tree.
> What I'm getting at is that if it's a fix for a patch already in
> networking trees the patch needs to have a Fixes tag. And if the 
> bug is present in net - the patch needs to go to net rather than
> net-next.

Looking closer I think this got added in:
commit 1ff0fcfcb1a6 ("ibm_newemac: Fix new MAL feature handling")
please post the first to net. Then once net gets merged to net-next
(which happens every Thu), you can proceed with the net-next
conversions.