From: Jijie Shao <shaojijie@huawei.com>
To: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>
Cc: <shenjian15@huawei.com>, <wangpeiyang1@huawei.com>,
<liuyonglong@huawei.com>, <chenhao418@huawei.com>,
<sudongming1@huawei.com>, <xujunsheng@huawei.com>,
<shiyongbang@huawei.com>, <libaihan@huawei.com>, <andrew@lunn.ch>,
<jdamato@fastly.com>, <horms@kernel.org>,
<kalesh-anakkur.purayil@broadcom.com>,
<christophe.jaillet@wanadoo.fr>, <jonathan.cameron@huawei.com>,
<shameerali.kolothum.thodi@huawei.com>, <salil.mehta@huawei.com>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<shaojijie@huawei.com>
Subject: [PATCH V11 net-next 08/10] net: hibmcge: Implement some ethtool_ops functions
Date: Tue, 8 Oct 2024 10:23:56 +0800 [thread overview]
Message-ID: <20241008022358.863393-9-shaojijie@huawei.com> (raw)
In-Reply-To: <20241008022358.863393-1-shaojijie@huawei.com>
Implement the .get_drvinfo .get_link .get_link_ksettings to get
the basic information and working status of the driver.
Implement the .set_link_ksettings to modify the rate, duplex,
and auto-negotiation status.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
---
ChangeLog:
RFC v1 -> RFC v2:
- Use ethtool_op_get_link(), phy_ethtool_get_link_ksettings(),
and phy_ethtool_set_link_ksettings() to simplify the code, suggested by Andrew.
- Delete workqueue for this patch set, suggested by Jonathan.
RFC v1: https://lore.kernel.org/all/20240731094245.1967834-1-shaojijie@huawei.com/
---
.../ethernet/hisilicon/hibmcge/hbg_ethtool.c | 17 +++++++++++++++++
.../ethernet/hisilicon/hibmcge/hbg_ethtool.h | 11 +++++++++++
.../net/ethernet/hisilicon/hibmcge/hbg_main.c | 2 ++
3 files changed, 30 insertions(+)
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.h
diff --git a/drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.c b/drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.c
new file mode 100644
index 000000000000..c3370114aef3
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.c
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2024 Hisilicon Limited.
+
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include "hbg_ethtool.h"
+
+static const struct ethtool_ops hbg_ethtool_ops = {
+ .get_link = ethtool_op_get_link,
+ .get_link_ksettings = phy_ethtool_get_link_ksettings,
+ .set_link_ksettings = phy_ethtool_set_link_ksettings,
+};
+
+void hbg_ethtool_set_ops(struct net_device *netdev)
+{
+ netdev->ethtool_ops = &hbg_ethtool_ops;
+}
diff --git a/drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.h b/drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.h
new file mode 100644
index 000000000000..628707ec2686
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (c) 2024 Hisilicon Limited. */
+
+#ifndef __HBG_ETHTOOL_H
+#define __HBG_ETHTOOL_H
+
+#include <linux/netdevice.h>
+
+void hbg_ethtool_set_ops(struct net_device *netdev);
+
+#endif
diff --git a/drivers/net/ethernet/hisilicon/hibmcge/hbg_main.c b/drivers/net/ethernet/hisilicon/hibmcge/hbg_main.c
index 9bea5e21066f..75505fb5cc4a 100644
--- a/drivers/net/ethernet/hisilicon/hibmcge/hbg_main.c
+++ b/drivers/net/ethernet/hisilicon/hibmcge/hbg_main.c
@@ -6,6 +6,7 @@
#include <linux/netdevice.h>
#include <linux/pci.h>
#include "hbg_common.h"
+#include "hbg_ethtool.h"
#include "hbg_hw.h"
#include "hbg_irq.h"
#include "hbg_mdio.h"
@@ -223,6 +224,7 @@ static int hbg_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
hbg_change_mtu(priv, ETH_DATA_LEN);
hbg_net_set_mac_address(priv->netdev, &priv->dev_specs.mac_addr);
+ hbg_ethtool_set_ops(netdev);
ret = devm_register_netdev(dev, netdev);
if (ret)
--
2.33.0
next prev parent reply other threads:[~2024-10-08 2:30 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-08 2:23 [PATCH V11 net-next 00/10] Add support of HIBMCGE Ethernet Driver Jijie Shao
2024-10-08 2:23 ` [PATCH V11 net-next 01/10] net: hibmcge: Add pci table supported in this module Jijie Shao
2024-10-08 2:23 ` [PATCH V11 net-next 02/10] net: hibmcge: Add read/write registers supported through the bar space Jijie Shao
2024-10-08 2:23 ` [PATCH V11 net-next 03/10] net: hibmcge: Add mdio and hardware configuration supported in this module Jijie Shao
2024-10-08 2:23 ` [PATCH V11 net-next 04/10] net: hibmcge: Add interrupt " Jijie Shao
2024-10-10 10:22 ` Simon Horman
2024-10-10 14:24 ` Jijie Shao
2024-10-08 2:23 ` [PATCH V11 net-next 05/10] net: hibmcge: Implement some .ndo functions Jijie Shao
2024-10-08 2:23 ` [PATCH V11 net-next 06/10] net: hibmcge: Implement .ndo_start_xmit function Jijie Shao
2024-10-08 2:23 ` [PATCH V11 net-next 07/10] net: hibmcge: Implement rx_poll function to receive packets Jijie Shao
2024-10-09 21:35 ` Joe Damato
2024-10-09 21:42 ` Joe Damato
2024-10-10 1:04 ` Jijie Shao
2024-10-08 2:23 ` Jijie Shao [this message]
2024-10-08 2:23 ` [PATCH V11 net-next 09/10] net: hibmcge: Add a Makefile and update Kconfig for hibmcge Jijie Shao
2024-10-08 2:23 ` [PATCH V11 net-next 10/10] net: hibmcge: Add maintainer " Jijie Shao
2024-10-10 2:37 ` Jakub Kicinski
2024-10-10 14:26 ` Jijie Shao
2024-10-10 2:36 ` [PATCH V11 net-next 00/10] Add support of HIBMCGE Ethernet Driver Jakub Kicinski
2024-10-10 14:25 ` Jijie Shao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241008022358.863393-9-shaojijie@huawei.com \
--to=shaojijie@huawei.com \
--cc=andrew@lunn.ch \
--cc=chenhao418@huawei.com \
--cc=christophe.jaillet@wanadoo.fr \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jdamato@fastly.com \
--cc=jonathan.cameron@huawei.com \
--cc=kalesh-anakkur.purayil@broadcom.com \
--cc=kuba@kernel.org \
--cc=libaihan@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=liuyonglong@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=salil.mehta@huawei.com \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=shenjian15@huawei.com \
--cc=shiyongbang@huawei.com \
--cc=sudongming1@huawei.com \
--cc=wangpeiyang1@huawei.com \
--cc=xujunsheng@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).