[PATCH AUTOSEL 4.19 3/6] net: ethernet: use ip_hdrlen() instead of bit shift

[PATCH AUTOSEL 4.19 3/6] net: ethernet: use ip_hdrlen() instead of bit shift

[Sasha Levin]

From: Moon Yeounsu <yyyynoom@gmail.com>

[ Upstream commit 9a039eeb71a42c8b13408a1976e300f3898e1be0 ]

`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)`
Therefore, we should use a well-defined function not a bit shift
to find the header length.

It also compresses two lines to a single line.

Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/jme.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index a5ab6f3403ae0..9b2471b2a9559 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -966,15 +966,13 @@ jme_udpsum(struct sk_buff *skb)
 	if (skb->protocol != htons(ETH_P_IP))
 		return csum;
 	skb_set_network_header(skb, ETH_HLEN);
-	if ((ip_hdr(skb)->protocol != IPPROTO_UDP) ||
-	    (skb->len < (ETH_HLEN +
-			(ip_hdr(skb)->ihl << 2) +
-			sizeof(struct udphdr)))) {
+
+	if (ip_hdr(skb)->protocol != IPPROTO_UDP ||
+	    skb->len < (ETH_HLEN + ip_hdrlen(skb) + sizeof(struct udphdr))) {
 		skb_reset_network_header(skb);
 		return csum;
 	}
-	skb_set_transport_header(skb,
-			ETH_HLEN + (ip_hdr(skb)->ihl << 2));
+	skb_set_transport_header(skb, ETH_HLEN + ip_hdrlen(skb));
 	csum = udp_hdr(skb)->check;
 	skb_reset_transport_header(skb);
 	skb_reset_network_header(skb);
-- 
2.43.0

[PATCH AUTOSEL 4.19 1/6] usbnet: ipheth: race between ipheth_close and error handling

[Sasha Levin]

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit e5876b088ba03a62124266fa20d00e65533c7269 ]

ipheth_sndbulk_callback() can submit carrier_work
as a part of its error handling. That means that
the driver must make sure that the work is cancelled
after it has made sure that no more URB can terminate
with an error condition.

Hence the order of actions in ipheth_close() needs
to be inverted.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/ipheth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index cea005cc7b2ab..c762335587a43 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -407,8 +407,8 @@ static int ipheth_close(struct net_device *net)
 {
 	struct ipheth_device *dev = netdev_priv(net);
 
-	cancel_delayed_work_sync(&dev->carrier_work);
 	netif_stop_queue(net);
+	cancel_delayed_work_sync(&dev->carrier_work);
 	return 0;
 }
 
-- 
2.43.0

[PATCH AUTOSEL 4.19 2/6] usbnet: ipheth: fix carrier detection in modes 1 and 4

[Sasha Levin]

From: Foster Snowhill <forst@pen.gy>

[ Upstream commit 67927a1b255d883881be9467508e0af9a5e0be9d ]

Apart from the standard "configurations", "interfaces" and "alternate
interface settings" in USB, iOS devices also have a notion of
"modes". In different modes, the device exposes a different set of
available configurations.

Depending on the iOS version, and depending on the current mode, the
length and contents of the carrier state control message differs:

* 1 byte (seen on iOS 4.2.1, 8.4):
    * 03: carrier off (mode 0)
    * 04: carrier on (mode 0)
* 3 bytes (seen on iOS 10.3.4, 15.7.6):
    * 03 03 03: carrier off (mode 0)
    * 04 04 03: carrier on (mode 0)
* 4 bytes (seen on iOS 16.5, 17.6):
    * 03 03 03 00: carrier off (mode 0)
    * 04 03 03 00: carrier off (mode 1)
    * 06 03 03 00: carrier off (mode 4)
    * 04 04 03 04: carrier on (mode 0 and 1)
    * 06 04 03 04: carrier on (mode 4)

Before this change, the driver always used the first byte of the
response to determine carrier state.

From this larger sample, the first byte seems to indicate the number of
available USB configurations in the current mode (with the exception of
the default mode 0), and in some cases (namely mode 1 and 4) does not
correlate with the carrier state.

Previous logic erroneously counted `04 03 03 00` as "carrier on" and
`06 04 03 04` as "carrier off" on iOS versions that support mode 1 and
mode 4 respectively.

Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for
the ipheth driver.

Check the second byte of the control message where possible, and fall
back to checking the first byte on older iOS versions.

Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/ipheth.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index c762335587a43..43db0f37f1951 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -307,13 +307,14 @@ static int ipheth_carrier_set(struct ipheth_device *dev)
 			0x02, /* index */
 			dev->ctrl_buf, IPHETH_CTRL_BUF_SIZE,
 			IPHETH_CTRL_TIMEOUT);
-	if (retval < 0) {
+	if (retval <= 0) {
 		dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n",
 			__func__, retval);
 		return retval;
 	}
 
-	if (dev->ctrl_buf[0] == IPHETH_CARRIER_ON) {
+	if ((retval == 1 && dev->ctrl_buf[0] == IPHETH_CARRIER_ON) ||
+	    (retval >= 2 && dev->ctrl_buf[1] == IPHETH_CARRIER_ON)) {
 		netif_carrier_on(dev->net);
 		if (dev->tx_urb->status != -EINPROGRESS)
 			netif_wake_queue(dev->net);
-- 
2.43.0

[PATCH AUTOSEL 4.19 3/6] net: ethernet: use ip_hdrlen() instead of bit shift

[Sasha Levin]

From: Moon Yeounsu <yyyynoom@gmail.com>

[ Upstream commit 9a039eeb71a42c8b13408a1976e300f3898e1be0 ]

`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)`
Therefore, we should use a well-defined function not a bit shift
to find the header length.

It also compresses two lines to a single line.

Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/jme.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index a5ab6f3403ae0..9b2471b2a9559 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -966,15 +966,13 @@ jme_udpsum(struct sk_buff *skb)
 	if (skb->protocol != htons(ETH_P_IP))
 		return csum;
 	skb_set_network_header(skb, ETH_HLEN);
-	if ((ip_hdr(skb)->protocol != IPPROTO_UDP) ||
-	    (skb->len < (ETH_HLEN +
-			(ip_hdr(skb)->ihl << 2) +
-			sizeof(struct udphdr)))) {
+
+	if (ip_hdr(skb)->protocol != IPPROTO_UDP ||
+	    skb->len < (ETH_HLEN + ip_hdrlen(skb) + sizeof(struct udphdr))) {
 		skb_reset_network_header(skb);
 		return csum;
 	}
-	skb_set_transport_header(skb,
-			ETH_HLEN + (ip_hdr(skb)->ihl << 2));
+	skb_set_transport_header(skb, ETH_HLEN + ip_hdrlen(skb));
 	csum = udp_hdr(skb)->check;
 	skb_reset_transport_header(skb);
 	skb_reset_network_header(skb);
-- 
2.43.0

[PATCH AUTOSEL 4.19 4/6] net: phy: vitesse: repair vsc73xx autonegotiation

[Sasha Levin]

From: Pawel Dembicki <paweldembicki@gmail.com>

[ Upstream commit de7a670f8defe4ed2115552ad23dea0f432f7be4 ]

When the vsc73xx mdio bus work properly, the generic autonegotiation
configuration works well.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/vitesse.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index fbf9ad429593c..697b07fdf3ec7 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -241,16 +241,6 @@ static int vsc739x_config_init(struct phy_device *phydev)
 	return genphy_config_init(phydev);
 }
 
-static int vsc73xx_config_aneg(struct phy_device *phydev)
-{
-	/* The VSC73xx switches does not like to be instructed to
-	 * do autonegotiation in any way, it prefers that you just go
-	 * with the power-on/reset defaults. Writing some registers will
-	 * just make autonegotiation permanently fail.
-	 */
-	return 0;
-}
-
 /* This adds a skew for both TX and RX clocks, so the skew should only be
  * applied to "rgmii-id" interfaces. It may not work as expected
  * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */
@@ -459,7 +449,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	.features       = PHY_GBIT_FEATURES,
 	.config_init    = vsc738x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
@@ -468,7 +457,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	.features       = PHY_GBIT_FEATURES,
 	.config_init    = vsc738x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
@@ -477,7 +465,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	.features       = PHY_GBIT_FEATURES,
 	.config_init    = vsc739x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
@@ -486,7 +473,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	.features       = PHY_GBIT_FEATURES,
 	.config_init    = vsc739x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
-- 
2.43.0

Re: [PATCH AUTOSEL 4.19 1/6] usbnet: ipheth: race between ipheth_close and error handling

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 478 bytes --]

Hi!

Sasha, please include cover letter.

This whole series is already in -stable, as part of 6.1.110 or
6.1.111 (and I guess that means 4.19/5.10 parts are queued, too).

It may be identical to earlier AUTOSEL series, or something like that.

Best regards,
                                                        Pavel
-- 
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]