[PATCH AUTOSEL 5.4 1/2] net: amd: mvme147: Fix probe banner message

[PATCH AUTOSEL 5.4 1/2] net: amd: mvme147: Fix probe banner message

[Sasha Levin]

From: Daniel Palmer <daniel@0x0f.com>

[ Upstream commit 82c5b53140faf89c31ea2b3a0985a2f291694169 ]

Currently this driver prints this line with what looks like
a rogue format specifier when the device is probed:
[    2.840000] eth%d: MVME147 at 0xfffe1800, irq 12, Hardware Address xx:xx:xx:xx:xx:xx

Change the printk() for netdev_info() and move it after the
registration has completed so it prints out the name of the
interface properly.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/mvme147.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/amd/mvme147.c b/drivers/net/ethernet/amd/mvme147.c
index 72abd3f82249b..eb7b1da2fb06f 100644
--- a/drivers/net/ethernet/amd/mvme147.c
+++ b/drivers/net/ethernet/amd/mvme147.c
@@ -106,10 +106,6 @@ struct net_device * __init mvme147lance_probe(int unit)
 	address = address >> 8;
 	dev->dev_addr[3] = address&0xff;
 
-	printk("%s: MVME147 at 0x%08lx, irq %d, Hardware Address %pM\n",
-	       dev->name, dev->base_addr, MVME147_LANCE_IRQ,
-	       dev->dev_addr);
-
 	lp = netdev_priv(dev);
 	lp->ram = __get_dma_pages(GFP_ATOMIC, 3);	/* 32K */
 	if (!lp->ram) {
@@ -139,6 +135,9 @@ struct net_device * __init mvme147lance_probe(int unit)
 		return ERR_PTR(err);
 	}
 
+	netdev_info(dev, "MVME147 at 0x%08lx, irq %d, Hardware Address %pM\n",
+		    dev->base_addr, MVME147_LANCE_IRQ, dev->dev_addr);
+
 	return dev;
 }
 
-- 
2.43.0