netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Barker <paul.barker.ct@bp.renesas.com>
To: Sergey Shtylyov <s.shtylyov@omp.ru>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: "Paul Barker" <paul.barker.ct@bp.renesas.com>,
	"Geert Uytterhoeven" <geert+renesas@glider.be>,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	"Biju Das" <biju.das.jz@bp.renesas.com>,
	"Claudiu Beznea" <claudiu.beznea.uj@bp.renesas.com>,
	netdev@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [net-next PATCH v2 02/10] net: ravb: Disable IP header RX checksum offloading
Date: Tue, 15 Oct 2024 14:36:26 +0100	[thread overview]
Message-ID: <20241015133634.193-3-paul.barker.ct@bp.renesas.com> (raw)
In-Reply-To: <20241015133634.193-1-paul.barker.ct@bp.renesas.com>

For IPv4 packets, the header checksum will always be checked in software
in the RX path (inet_gro_receive() calls ip_fast_csum() unconditionally)
so there is no advantage in asking the hardware to also calculate this
checksum.

Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
---
 drivers/net/ethernet/renesas/ravb.h      |  2 +-
 drivers/net/ethernet/renesas/ravb_main.c | 16 +++++++++-------
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
index 4e1e0a754cd9..98496aa39f3d 100644
--- a/drivers/net/ethernet/renesas/ravb.h
+++ b/drivers/net/ethernet/renesas/ravb.h
@@ -1014,7 +1014,7 @@ enum CSR2_BIT {
 	CSR2_RDHD	= 0x08000000,
 };
 
-#define CSR2_CSUM_ENABLE (CSR2_RIP4 | CSR2_RTCP4 | CSR2_RUDP4 | CSR2_RICMP4)
+#define CSR2_CSUM_ENABLE (CSR2_RTCP4 | CSR2_RUDP4 | CSR2_RICMP4)
 
 #define DBAT_ENTRY_NUM	22
 #define RX_QUEUE_OFFSET	4
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index c8988c0c85a1..43db69d03684 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -749,13 +749,18 @@ static void ravb_get_tx_tstamp(struct net_device *ndev)
 static void ravb_rx_csum_gbeth(struct sk_buff *skb)
 {
 	struct skb_shared_info *shinfo = skb_shinfo(skb);
-	__wsum csum_ip_hdr, csum_proto;
+	__wsum csum_proto;
 	skb_frag_t *last_frag;
 	u8 *hw_csum;
 
 	/* The hardware checksum status is contained in sizeof(__sum16) * 2 = 4
-	 * bytes appended to packet data. First 2 bytes is ip header checksum
-	 * and last 2 bytes is protocol checksum.
+	 * bytes appended to packet data.
+	 *
+	 * For ipv4, the first 2 bytes are the ip header checksum status. We can
+	 * ignore this as it will always be re-checked in inet_gro_receive().
+	 *
+	 * The last 2 bytes are the protocol checksum status which will be zero
+	 * if the checksum has been validated.
 	 */
 	if (unlikely(skb->len < sizeof(__sum16) * 2))
 		return;
@@ -771,16 +776,13 @@ static void ravb_rx_csum_gbeth(struct sk_buff *skb)
 	hw_csum -= sizeof(__sum16);
 	csum_proto = csum_unfold((__force __sum16)get_unaligned_le16(hw_csum));
 
-	hw_csum -= sizeof(__sum16);
-	csum_ip_hdr = csum_unfold((__force __sum16)get_unaligned_le16(hw_csum));
-
 	if (skb_is_nonlinear(skb))
 		skb_frag_size_sub(last_frag, 2 * sizeof(__sum16));
 	else
 		skb_trim(skb, skb->len - 2 * sizeof(__sum16));
 
 	/* TODO: IPV6 Rx checksum */
-	if (skb->protocol == htons(ETH_P_IP) && !csum_ip_hdr && !csum_proto)
+	if (skb->protocol == htons(ETH_P_IP) && !csum_proto)
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 }
 
-- 
2.43.0


  parent reply	other threads:[~2024-10-15 13:37 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-15 13:36 [net-next PATCH v2 00/10] Extend GbEth checksum offload support to VLAN/IPv6 packets Paul Barker
2024-10-15 13:36 ` [net-next PATCH v2 01/10] net: ravb: Factor out checksum offload enable bits Paul Barker
2024-10-15 13:36 ` Paul Barker [this message]
2024-10-15 13:36 ` [net-next PATCH v2 03/10] net: ravb: Drop IP protocol check from RX csum verification Paul Barker
2024-10-15 13:36 ` [net-next PATCH v2 04/10] net: ravb: Combine if conditions in RX csum validation Paul Barker
2024-10-15 13:36 ` [net-next PATCH v2 05/10] net: ravb: Simplify types " Paul Barker
2024-10-15 15:23   ` Sergey Shtylyov
2024-10-15 13:36 ` [net-next PATCH v2 06/10] net: ravb: Disable IP header TX checksum offloading Paul Barker
2024-10-15 13:36 ` [net-next PATCH v2 07/10] net: ravb: Simplify UDP TX checksum offload Paul Barker
2024-10-15 13:36 ` [net-next PATCH v2 08/10] net: ravb: Enable IPv6 RX checksum offloading for GbEth Paul Barker
2024-10-15 13:36 ` [net-next PATCH v2 09/10] net: ravb: Enable IPv6 TX checksum offload " Paul Barker
2024-10-15 15:47   ` Sergey Shtylyov
2024-10-15 13:36 ` [net-next PATCH v2 10/10] net: ravb: Add VLAN checksum support Paul Barker
2024-10-15 15:50   ` Sergey Shtylyov
2024-10-18  2:30 ` [net-next PATCH v2 00/10] Extend GbEth checksum offload support to VLAN/IPv6 packets patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241015133634.193-3-paul.barker.ct@bp.renesas.com \
    --to=paul.barker.ct@bp.renesas.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=claudiu.beznea.uj@bp.renesas.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=geert+renesas@glider.be \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=pabeni@redhat.com \
    --cc=s.shtylyov@omp.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).