From: Jakub Kicinski <kuba@kernel.org>
To: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Michael Chan <michael.chan@broadcom.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>,
Potnuri Bharat Teja <bharat@chelsio.com>,
Christian Benvenuti <benve@cisco.com>,
Satish Kharat <satishkh@cisco.com>,
Manish Chopra <manishc@marvell.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-hardening@vger.kernel.org
Subject: Re: [PATCH 2/2][next] net: ethtool: Avoid thousands of -Wflex-array-member-not-at-end warnings
Date: Tue, 29 Oct 2024 06:58:24 -0700 [thread overview]
Message-ID: <20241029065824.670f14fc@kernel.org> (raw)
In-Reply-To: <f4f8ca5cd7f039bcab816194342c7b6101e891fe.1729536776.git.gustavoars@kernel.org>
On Mon, 21 Oct 2024 13:02:27 -0600 Gustavo A. R. Silva wrote:
> @@ -3025,7 +3025,7 @@ static int bnxt_set_link_ksettings(struct net_device *dev,
> {
> struct bnxt *bp = netdev_priv(dev);
> struct bnxt_link_info *link_info = &bp->link_info;
> - const struct ethtool_link_settings *base = &lk_ksettings->base;
> + const struct ethtool_link_settings_hdr *base = &lk_ksettings->base;
Please improve the variable ordering while at it. Longest list first,
so move the @base definition first.
> bool set_pause = false;
> u32 speed, lanes = 0;
> int rc = 0;
> diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
> index 7f3f5afa864f..cc43294bdc96 100644
> --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
> +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
> @@ -663,7 +663,7 @@ static int get_link_ksettings(struct net_device *dev,
> struct ethtool_link_ksettings *link_ksettings)
> {
> struct port_info *pi = netdev_priv(dev);
> - struct ethtool_link_settings *base = &link_ksettings->base;
> + struct ethtool_link_settings_hdr *base = &link_ksettings->base;
ditto
> /* For the nonce, the Firmware doesn't send up Port State changes
> * when the Virtual Interface attached to the Port is down. So
> @@ -719,7 +719,7 @@ static int set_link_ksettings(struct net_device *dev,
> {
> struct port_info *pi = netdev_priv(dev);
> struct link_config *lc = &pi->link_cfg;
> - const struct ethtool_link_settings *base = &link_ksettings->base;
> + const struct ethtool_link_settings_hdr *base = &link_ksettings->base;
and here
> struct link_config old_lc;
> unsigned int fw_caps;
> int ret = 0;
> diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
> index 2fbe0f059a0b..0d85ac342ac7 100644
> --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
> +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
> @@ -1437,7 +1437,7 @@ static int cxgb4vf_get_link_ksettings(struct net_device *dev,
> struct ethtool_link_ksettings *link_ksettings)
> {
> struct port_info *pi = netdev_priv(dev);
> - struct ethtool_link_settings *base = &link_ksettings->base;
> + struct ethtool_link_settings_hdr *base = &link_ksettings->base;
and here
> /* For the nonce, the Firmware doesn't send up Port State changes
> * when the Virtual Interface attached to the Port is down. So
> diff --git a/drivers/net/ethernet/cisco/enic/enic_ethtool.c b/drivers/net/ethernet/cisco/enic/enic_ethtool.c
> index f7986f2b6a17..8670eb394fad 100644
> --- a/drivers/net/ethernet/cisco/enic/enic_ethtool.c
> +++ b/drivers/net/ethernet/cisco/enic/enic_ethtool.c
> @@ -130,7 +130,7 @@ static int enic_get_ksettings(struct net_device *netdev,
> struct ethtool_link_ksettings *ecmd)
> {
> struct enic *enic = netdev_priv(netdev);
> - struct ethtool_link_settings *base = &ecmd->base;
> + struct ethtool_link_settings_hdr *base = &ecmd->base;
and here
> ethtool_link_ksettings_add_link_mode(ecmd, supported,
> 10000baseT_Full);
> @@ -62,7 +62,7 @@ static int linkmodes_reply_size(const struct ethnl_req_info *req_base,
> {
> const struct linkmodes_reply_data *data = LINKMODES_REPDATA(reply_base);
> const struct ethtool_link_ksettings *ksettings = &data->ksettings;
> - const struct ethtool_link_settings *lsettings = &ksettings->base;
> + const struct ethtool_link_settings_hdr *lsettings = &ksettings->base;
here it was correct and now its not
> bool compact = req_base->flags & ETHTOOL_FLAG_COMPACT_BITSETS;
> int len, ret;
>
> @@ -103,7 +103,7 @@ static int linkmodes_fill_reply(struct sk_buff *skb,
> {
> const struct linkmodes_reply_data *data = LINKMODES_REPDATA(reply_base);
> const struct ethtool_link_ksettings *ksettings = &data->ksettings;
> - const struct ethtool_link_settings *lsettings = &ksettings->base;
> + const struct ethtool_link_settings_hdr *lsettings = &ksettings->base;
same
> bool compact = req_base->flags & ETHTOOL_FLAG_COMPACT_BITSETS;
> int ret;
next prev parent reply other threads:[~2024-10-29 13:58 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-21 19:01 [PATCH 0/2][next] UAPI: net/ethtool: Avoid thousands of -Wflex-array-member-not-at-end warnings Gustavo A. R. Silva
2024-10-21 19:01 ` [PATCH 1/2][next] UAPI: ethtool: Use __struct_group() in struct ethtool_link_settings Gustavo A. R. Silva
2024-10-21 20:11 ` Andrew Lunn
2024-10-23 21:30 ` Gustavo A. R. Silva
2024-10-21 19:02 ` [PATCH 2/2][next] net: ethtool: Avoid thousands of -Wflex-array-member-not-at-end warnings Gustavo A. R. Silva
2024-10-28 23:21 ` Jakub Kicinski
2024-10-28 23:32 ` Gustavo A. R. Silva
2024-10-29 0:32 ` Jakub Kicinski
2024-10-29 2:37 ` Gustavo A. R. Silva
2024-10-29 13:56 ` Jakub Kicinski
2024-10-29 13:58 ` Jakub Kicinski [this message]
2024-10-29 16:55 ` Gustavo A. R. Silva
2024-10-29 18:08 ` Jakub Kicinski
2024-10-29 18:18 ` Gustavo A. R. Silva
2024-10-29 18:39 ` Jakub Kicinski
2024-10-29 18:48 ` Gustavo A. R. Silva
2024-10-29 18:54 ` Jakub Kicinski
2024-10-29 19:18 ` Gustavo A. R. Silva
2024-10-29 20:00 ` Jakub Kicinski
2024-10-29 22:06 ` Gustavo A. R. Silva
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241029065824.670f14fc@kernel.org \
--to=kuba@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=benve@cisco.com \
--cc=bharat@chelsio.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gustavoars@kernel.org \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manishc@marvell.com \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=satishkh@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).