From: Divya Koppera <divya.koppera@microchip.com>
To: <andrew@lunn.ch>, <arun.ramadoss@microchip.com>,
<UNGLinuxDriver@microchip.com>, <hkallweit1@gmail.com>,
<linux@armlinux.org.uk>, <davem@davemloft.net>,
<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<richardcochran@gmail.com>, <vadim.fedorenko@linux.dev>
Subject: [PATCH net-next v4 1/5] net: phy: microchip_ptp : Add header file for Microchip ptp library
Date: Thu, 14 Nov 2024 17:34:51 +0530 [thread overview]
Message-ID: <20241114120455.5413-2-divya.koppera@microchip.com> (raw)
In-Reply-To: <20241114120455.5413-1-divya.koppera@microchip.com>
This ptp header file library will cover ptp macros for future phys in
Microchip where addresses will be same but base offset and mmd address
may changes.
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
---
v3 -> v4
- Re-ordered mchp_ptp_clock structure.
v2 -> v3
- No changes
v1 -> v2
- Fixed sparse warnings and compilation errors/warnings reported by kernel
test robot
---
drivers/net/phy/microchip_ptp.h | 216 ++++++++++++++++++++++++++++++++
1 file changed, 216 insertions(+)
create mode 100644 drivers/net/phy/microchip_ptp.h
diff --git a/drivers/net/phy/microchip_ptp.h b/drivers/net/phy/microchip_ptp.h
new file mode 100644
index 000000000000..1b6e0d9d7e76
--- /dev/null
+++ b/drivers/net/phy/microchip_ptp.h
@@ -0,0 +1,216 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Copyright (C) 2024 Microchip Technology
+ */
+
+#ifndef _MICROCHIP_PTP_H
+#define _MICROCHIP_PTP_H
+
+#if IS_ENABLED(CONFIG_MICROCHIP_PHYPTP)
+
+#include <linux/ptp_clock_kernel.h>
+#include <linux/ptp_clock.h>
+#include <linux/ptp_classify.h>
+#include <linux/net_tstamp.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#define MCHP_PTP_CMD_CTL(b) ((b) + 0x0)
+#define MCHP_PTP_CMD_CTL_LTC_STEP_NSEC BIT(6)
+#define MCHP_PTP_CMD_CTL_LTC_STEP_SEC BIT(5)
+#define MCHP_PTP_CMD_CTL_CLOCK_LOAD BIT(4)
+#define MCHP_PTP_CMD_CTL_CLOCK_READ BIT(3)
+#define MCHP_PTP_CMD_CTL_EN BIT(1)
+#define MCHP_PTP_CMD_CTL_DIS BIT(0)
+
+#define MCHP_PTP_REF_CLK_CFG(b) ((b) + 0x2)
+#define MCHP_PTP_REF_CLK_SRC_250MHZ 0x0
+#define MCHP_PTP_REF_CLK_PERIOD_OVERRIDE BIT(9)
+#define MCHP_PTP_REF_CLK_PERIOD 4
+#define MCHP_PTP_REF_CLK_CFG_SET (MCHP_PTP_REF_CLK_SRC_250MHZ |\
+ MCHP_PTP_REF_CLK_PERIOD_OVERRIDE |\
+ MCHP_PTP_REF_CLK_PERIOD)
+
+#define MCHP_PTP_LTC_SEC_HI(b) ((b) + 0x5)
+#define MCHP_PTP_LTC_SEC_MID(b) ((b) + 0x6)
+#define MCHP_PTP_LTC_SEC_LO(b) ((b) + 0x7)
+#define MCHP_PTP_LTC_NS_HI(b) ((b) + 0x8)
+#define MCHP_PTP_LTC_NS_LO(b) ((b) + 0x9)
+#define MCHP_PTP_LTC_RATE_ADJ_HI(b) ((b) + 0xc)
+#define MCHP_PTP_LTC_RATE_ADJ_HI_DIR BIT(15)
+#define MCHP_PTP_LTC_RATE_ADJ_LO(b) ((b) + 0xd)
+#define MCHP_PTP_LTC_STEP_ADJ_HI(b) ((b) + 0x12)
+#define MCHP_PTP_LTC_STEP_ADJ_HI_DIR BIT(15)
+#define MCHP_PTP_LTC_STEP_ADJ_LO(b) ((b) + 0x13)
+#define MCHP_PTP_LTC_READ_SEC_HI(b) ((b) + 0x29)
+#define MCHP_PTP_LTC_READ_SEC_MID(b) ((b) + 0x2a)
+#define MCHP_PTP_LTC_READ_SEC_LO(b) ((b) + 0x2b)
+#define MCHP_PTP_LTC_READ_NS_HI(b) ((b) + 0x2c)
+#define MCHP_PTP_LTC_READ_NS_LO(b) ((b) + 0x2d)
+#define MCHP_PTP_OP_MODE(b) ((b) + 0x41)
+#define MCHP_PTP_OP_MODE_DIS 0
+#define MCHP_PTP_OP_MODE_STANDALONE 1
+#define MCHP_PTP_LATENCY_CORRECTION_CTL(b) ((b) + 0x44)
+#define MCHP_PTP_PREDICTOR_EN BIT(6)
+#define MCHP_PTP_TX_PRED_DIS BIT(1)
+#define MCHP_PTP_RX_PRED_DIS BIT(0)
+#define MCHP_PTP_LATENCY_SETTING (MCHP_PTP_PREDICTOR_EN | \
+ MCHP_PTP_TX_PRED_DIS | \
+ MCHP_PTP_RX_PRED_DIS)
+
+#define MCHP_PTP_INT_EN(b) ((b) + 0x0)
+#define MCHP_PTP_INT_STS(b) ((b) + 0x01)
+#define MCHP_PTP_INT_TX_TS_OVRFL_EN BIT(3)
+#define MCHP_PTP_INT_TX_TS_EN BIT(2)
+#define MCHP_PTP_INT_RX_TS_OVRFL_EN BIT(1)
+#define MCHP_PTP_INT_RX_TS_EN BIT(0)
+#define MCHP_PTP_INT_ALL_MSK (MCHP_PTP_INT_TX_TS_OVRFL_EN | \
+ MCHP_PTP_INT_TX_TS_EN | \
+ MCHP_PTP_INT_RX_TS_OVRFL_EN |\
+ MCHP_PTP_INT_RX_TS_EN)
+
+#define MCHP_PTP_CAP_INFO(b) ((b) + 0x2e)
+#define MCHP_PTP_TX_TS_CNT(v) (((v) & GENMASK(11, 8)) >> 8)
+#define MCHP_PTP_RX_TS_CNT(v) ((v) & GENMASK(3, 0))
+
+#define MCHP_PTP_RX_PARSE_CONFIG(b) ((b) + 0x42)
+#define MCHP_PTP_RX_PARSE_L2_ADDR_EN(b) ((b) + 0x44)
+#define MCHP_PTP_RX_PARSE_IPV4_ADDR_EN(b) ((b) + 0x45)
+
+#define MCHP_PTP_RX_TIMESTAMP_CONFIG(b) ((b) + 0x4e)
+#define MCHP_PTP_RX_TIMESTAMP_CONFIG_PTP_FCS_DIS BIT(0)
+
+#define MCHP_PTP_RX_VERSION(b) ((b) + 0x48)
+#define MCHP_PTP_RX_TIMESTAMP_EN(b) ((b) + 0x4d)
+
+#define MCHP_PTP_RX_INGRESS_NS_HI(b) ((b) + 0x54)
+#define MCHP_PTP_RX_INGRESS_NS_HI_TS_VALID BIT(15)
+
+#define MCHP_PTP_RX_INGRESS_NS_LO(b) ((b) + 0x55)
+#define MCHP_PTP_RX_INGRESS_SEC_HI(b) ((b) + 0x56)
+#define MCHP_PTP_RX_INGRESS_SEC_LO(b) ((b) + 0x57)
+#define MCHP_PTP_RX_MSG_HEADER2(b) ((b) + 0x59)
+
+#define MCHP_PTP_TX_PARSE_CONFIG(b) ((b) + 0x82)
+#define MCHP_PTP_PARSE_CONFIG_LAYER2_EN BIT(0)
+#define MCHP_PTP_PARSE_CONFIG_IPV4_EN BIT(1)
+#define MCHP_PTP_PARSE_CONFIG_IPV6_EN BIT(2)
+
+#define MCHP_PTP_TX_PARSE_L2_ADDR_EN(b) ((b) + 0x84)
+#define MCHP_PTP_TX_PARSE_IPV4_ADDR_EN(b) ((b) + 0x85)
+
+#define MCHP_PTP_TX_VERSION(b) ((b) + 0x88)
+#define MCHP_PTP_MAX_VERSION(x) (((x) & GENMASK(7, 0)) << 8)
+#define MCHP_PTP_MIN_VERSION(x) ((x) & GENMASK(7, 0))
+
+#define MCHP_PTP_TX_TIMESTAMP_EN(b) ((b) + 0x8d)
+#define MCHP_PTP_TIMESTAMP_EN_SYNC BIT(0)
+#define MCHP_PTP_TIMESTAMP_EN_DREQ BIT(1)
+#define MCHP_PTP_TIMESTAMP_EN_PDREQ BIT(2)
+#define MCHP_PTP_TIMESTAMP_EN_PDRES BIT(3)
+#define MCHP_PTP_TIMESTAMP_EN_ALL (MCHP_PTP_TIMESTAMP_EN_SYNC |\
+ MCHP_PTP_TIMESTAMP_EN_DREQ |\
+ MCHP_PTP_TIMESTAMP_EN_PDREQ |\
+ MCHP_PTP_TIMESTAMP_EN_PDRES)
+
+#define MCHP_PTP_TX_TIMESTAMP_CONFIG(b) ((b) + 0x8e)
+#define MCHP_PTP_TX_TIMESTAMP_CONFIG_PTP_FCS_DIS BIT(0)
+
+#define MCHP_PTP_TX_MOD(b) ((b) + 0x8f)
+#define MCHP_PTP_TX_MOD_PTP_SYNC_TS_INSERT BIT(12)
+#define MCHP_PTP_TX_MOD_PTP_FU_TS_INSERT BIT(11)
+
+#define MCHP_PTP_TX_EGRESS_NS_HI(b) ((b) + 0x94)
+#define MCHP_PTP_TX_EGRESS_NS_HI_TS_VALID BIT(15)
+
+#define MCHP_PTP_TX_EGRESS_NS_LO(b) ((b) + 0x95)
+#define MCHP_PTP_TX_EGRESS_SEC_HI(b) ((b) + 0x96)
+#define MCHP_PTP_TX_EGRESS_SEC_LO(b) ((b) + 0x97)
+#define MCHP_PTP_TX_MSG_HEADER2(b) ((b) + 0x99)
+
+#define MCHP_PTP_TSU_GEN_CONFIG(b) ((b) + 0xc0)
+#define MCHP_PTP_TSU_GEN_CFG_TSU_EN BIT(0)
+
+#define MCHP_PTP_TSU_HARD_RESET(b) ((b) + 0xc1)
+#define MCHP_PTP_TSU_HARDRESET BIT(0)
+
+/* Represents 1ppm adjustment in 2^32 format with
+ * each nsec contains 4 clock cycles in 250MHz.
+ * The value is calculated as following: (1/1000000)/((2^-32)/4)
+ */
+#define MCHP_PTP_1PPM_FORMAT 17179
+#define MCHP_PTP_FIFO_SIZE 8
+#define MCHP_PTP_MAX_ADJ 31249999
+
+#define BASE_CLK(p) ((p)->clk_base_addr)
+#define BASE_PORT(p) ((p)->port_base_addr)
+#define PTP_MMD(p) ((p)->mmd)
+
+enum ptp_fifo_dir {
+ PTP_INGRESS_FIFO,
+ PTP_EGRESS_FIFO
+};
+
+struct mchp_ptp_clock {
+ struct mii_timestamper mii_ts;
+ struct phy_device *phydev;
+ struct ptp_clock *ptp_clock;
+
+ struct sk_buff_head tx_queue;
+ struct sk_buff_head rx_queue;
+ struct list_head rx_ts_list;
+
+ struct ptp_clock_info caps;
+
+ /* Lock for Rx ts fifo */
+ spinlock_t rx_ts_lock;
+ int hwts_tx_type;
+
+ enum hwtstamp_rx_filters rx_filter;
+ int layer;
+ int version;
+ u16 port_base_addr;
+ u16 clk_base_addr;
+
+ /* Lock for phc */
+ struct mutex ptp_lock;
+ u8 mmd;
+};
+
+struct mchp_ptp_rx_ts {
+ struct list_head list;
+ u32 seconds;
+ u32 nsec;
+ u16 seq_id;
+};
+
+struct mchp_ptp_clock *mchp_ptp_probe(struct phy_device *phydev, u8 mmd,
+ u16 clk_base, u16 port_base);
+
+int mchp_config_ptp_intr(struct mchp_ptp_clock *ptp_clock,
+ u16 reg, u16 val, bool enable);
+
+irqreturn_t mchp_ptp_handle_interrupt(struct mchp_ptp_clock *ptp_clock);
+
+#else
+
+static inline struct mchp_ptp_clock *mchp_ptp_probe(struct phy_device *phydev,
+ u8 mmd, u16 clk_base,
+ u16 port_base)
+{
+ return NULL;
+}
+
+static inline int mchp_config_ptp_intr(struct mchp_ptp_clock *ptp_clock,
+ u16 reg, u16 val, bool enable)
+{
+ return 0;
+}
+
+static inline irqreturn_t mchp_ptp_handle_interrupt(struct mchp_ptp_clock *ptp_clock)
+{
+ return IRQ_NONE;
+}
+
+#endif //CONFIG_MICROCHIP_PHYPTP
+
+#endif //_MICROCHIP_PTP_H
--
2.17.1
next prev parent reply other threads:[~2024-11-14 12:04 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-14 12:04 [PATCH net-next v4 0/5] Add ptp library for Microchip phys Divya Koppera
2024-11-14 12:04 ` Divya Koppera [this message]
2024-11-14 14:15 ` [PATCH net-next v4 1/5] net: phy: microchip_ptp : Add header file for Microchip ptp library Vadim Fedorenko
2024-11-16 0:37 ` Jakub Kicinski
2024-11-14 12:04 ` [PATCH net-next v4 2/5] net: phy: microchip_ptp : Add ptp library for Microchip phys Divya Koppera
2024-11-14 14:18 ` Vadim Fedorenko
2024-11-14 12:04 ` [PATCH net-next v4 3/5] net: phy: Kconfig: Add ptp library support and 1588 optional flag in " Divya Koppera
2024-11-14 14:19 ` Vadim Fedorenko
2024-11-16 0:36 ` Jakub Kicinski
2024-11-18 10:46 ` Divya.Koppera
2024-11-14 12:04 ` [PATCH net-next v4 4/5] net: phy: Makefile: Add makefile support for ptp " Divya Koppera
2024-11-14 14:19 ` Vadim Fedorenko
2024-11-14 12:04 ` [PATCH net-next v4 5/5] net: phy: microchip_t1 : Add initialization of ptp for lan887x Divya Koppera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241114120455.5413-2-divya.koppera@microchip.com \
--to=divya.koppera@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=arun.ramadoss@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).