From: Ivan Shapovalov <intelfx@intelfx.name>
To: linux-kernel@vger.kernel.org
Cc: "Ivan Shapovalov" <intelfx@intelfx.name>,
"Bjørn Mork" <bjorn@mork.no>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Johan Hovold" <johan@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
netdev@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [PATCH 1/5] net: usb: qmi_wwan: add IDs for EM7565 (9X50) in "MBIM USBIF" config
Date: Sun, 17 Nov 2024 12:31:11 +0400 [thread overview]
Message-ID: <20241117083204.57738-1-intelfx@intelfx.name> (raw)
This change was discovered and tested using author's own EM7565 device.
This "MBIM USBIF" configuration corresponds to the `AT!USBCOMP=1,1,xxx`
on-device USB composition setting. When activated, the VID:PID resets
to 1199:90b1 ("application" mode) + 1199:90b0 ("boot" mode, i.e. QDL).
The "MBIM USBIF" label comes from on-device help:
---8<---
AT!USBCOMP=?
!USBCOMP:
AT!USBCOMP=<Config Index>,<Config Type>,<Interface bitmask>
<Config Index> - configuration index to which the composition applies, should be 1
<Config Type> - 1:MBIM USBIF, 2:PCIE USBIF, 3:Legacy-Generic, 4:RNDIS
<Interface bitmask> - DIAG - 0x00000001,
NMEA - 0x00000004,
MODEM - 0x00000008,
RMNET0 - 0x00000100,
MBIM - 0x00001000,
e.g.
10D - diag, nmea, modem, rmnet interfaces enabled
1009 - diag, modem, mbim interfaces enabled
The default configuration is:
at!usbcomp=1,3,10F
OK
---8<---
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
---
drivers/net/usb/qmi_wwan.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 0c011d8f5d4d..9a33393d4ce2 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1349,6 +1349,7 @@ static const struct usb_device_id products[] = {
{QMI_QUIRK_SET_DTR(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */
{QMI_QUIRK_SET_DTR(0x1199, 0x907b, 10)},/* Sierra Wireless EM74xx */
{QMI_QUIRK_SET_DTR(0x1199, 0x9091, 8)}, /* Sierra Wireless EM7565 */
+ {QMI_QUIRK_SET_DTR(0x1199, 0x90b1, 8)}, /* Sierra Wireless EM7565 "MBIM USB-IF" */
{QMI_QUIRK_SET_DTR(0x1199, 0xc081, 8)}, /* Sierra Wireless EM7590 */
{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
{QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */
--
2.47.0.5.gd823fa0eac
next reply other threads:[~2024-11-17 8:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-17 8:31 Ivan Shapovalov [this message]
2024-11-17 8:31 ` [PATCH 2/5] USB: serial: qcserial: add EM7565 (9X50) IDs and configurations Ivan Shapovalov
2024-11-17 8:31 ` [PATCH 3/5] USB: serial: qcserial: add EM9xxx (SDX55) " Ivan Shapovalov
2024-11-17 8:31 ` [PATCH 4/5] USB: serial: qcserial: disable autosuspend for QDL configurations Ivan Shapovalov
2024-11-17 8:31 ` [PATCH 5/5] USB: serial: qcserial: enable ZLP for non-QDL interfaces Ivan Shapovalov
2024-11-19 4:55 ` [PATCH 1/5] net: usb: qmi_wwan: add IDs for EM7565 (9X50) in "MBIM USBIF" config Lars Melin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241117083204.57738-1-intelfx@intelfx.name \
--to=intelfx@intelfx.name \
--cc=andrew+netdev@lunn.ch \
--cc=bjorn@mork.no \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox