netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Leon Romanovsky <leonro@nvidia.com>
To: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Ilia Lin <ilia.lin@kernel.org>, <herbert@gondor.apana.org.au>,
	<davem@davemloft.net>, <dsahern@kernel.org>,
	<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>,
	<horms@kernel.org>, <netdev@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] xfrm: Add pre-encap fragmentation for packet offload
Date: Tue, 26 Nov 2024 15:22:20 +0200	[thread overview]
Message-ID: <20241126132220.GB1245331@unreal> (raw)
In-Reply-To: <Z0XEXqe38O5lcsq5@gauss3.secunet.de>

On Tue, Nov 26, 2024 at 01:51:42PM +0100, Steffen Klassert wrote:
> On Sun, Nov 24, 2024 at 11:35:31AM +0200, Ilia Lin wrote:
> > In packet offload mode the raw packets will be sent to the NiC,
> > and will not return to the Network Stack. In event of crossing
> > the MTU size after the encapsulation, the NiC HW may not be
> > able to fragment the final packet.
> > Adding mandatory pre-encapsulation fragmentation for both
> > IPv4 and IPv6, if tunnel mode with packet offload is configured
> > on the state.
> > 
> > Signed-off-by: Ilia Lin <ilia.lin@kernel.org>
> > ---
> >  net/ipv4/xfrm4_output.c | 31 +++++++++++++++++++++++++++++--
> >  net/ipv6/xfrm6_output.c |  8 ++++++--
> >  2 files changed, 35 insertions(+), 4 deletions(-)
> > 
> > diff --git a/net/ipv4/xfrm4_output.c b/net/ipv4/xfrm4_output.c
> > index 3cff51ba72bb0..a4271e0dd51bb 100644
> > --- a/net/ipv4/xfrm4_output.c
> > +++ b/net/ipv4/xfrm4_output.c
> > @@ -14,17 +14,44 @@
> >  #include <net/xfrm.h>
> >  #include <net/icmp.h>
> >  
> > +static int __xfrm4_output_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
> > +{
> > +	return xfrm_output(sk, skb);
> > +}
> > +
> >  static int __xfrm4_output(struct net *net, struct sock *sk, struct sk_buff *skb)
> >  {
> > -#ifdef CONFIG_NETFILTER
> > -	struct xfrm_state *x = skb_dst(skb)->xfrm;
> > +	struct dst_entry *dst = skb_dst(skb);
> > +	struct xfrm_state *x = dst->xfrm;
> > +	unsigned int mtu;
> > +	bool toobig;
> >  
> > +#ifdef CONFIG_NETFILTER
> >  	if (!x) {
> >  		IPCB(skb)->flags |= IPSKB_REROUTED;
> >  		return dst_output(net, sk, skb);
> >  	}
> >  #endif
> >  
> > +	if (x->props.mode != XFRM_MODE_TUNNEL || x->xso.type != XFRM_DEV_OFFLOAD_PACKET)
> > +		goto skip_frag;
> > +
> > +	mtu = xfrm_state_mtu(x, dst_mtu(skb_dst(skb)));
> > +
> > +	toobig = skb->len > mtu && !skb_is_gso(skb);
> > +
> > +	if (!skb->ignore_df && toobig && skb->sk) {
> > +		xfrm_local_error(skb, mtu);
> > +		kfree_skb(skb);
> > +		return -EMSGSIZE;
> > +	}
> > +
> > +	if (toobig) {
> > +		IPCB(skb)->frag_max_size = mtu;
> > +		return ip_do_fragment(net, sk, skb, __xfrm4_output_finish);
> > +	}
> 
> This would fragment the packet even if the DF bit is set.
> 
> Please no further packet offload stuff in generic code.

+ 100000

Thanks

> 

      reply	other threads:[~2024-11-26 13:22 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-24  9:35 [PATCH] xfrm: Add pre-encap fragmentation for packet offload Ilia Lin
2024-11-24 12:04 ` Leon Romanovsky
2024-11-25  9:26   ` Ilia Lin
2024-11-25 19:43     ` Leon Romanovsky
2024-11-26  7:48       ` Ilia Lin
     [not found]       ` <CA+5LGR0e677wm5zEx9yYZDtsCUL6etMoRB2yF9o5msqdVOWU8w@mail.gmail.com>
2024-11-26  8:35         ` Leon Romanovsky
2024-11-26 12:59           ` Steffen Klassert
2024-11-26 13:21             ` Leon Romanovsky
2024-11-28  9:25               ` Steffen Klassert
2024-11-28 12:14                 ` Leon Romanovsky
2024-11-26 12:51 ` Steffen Klassert
2024-11-26 13:22   ` Leon Romanovsky [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241126132220.GB1245331@unreal \
    --to=leonro@nvidia.com \
    --cc=davem@davemloft.net \
    --cc=dsahern@kernel.org \
    --cc=edumazet@google.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=horms@kernel.org \
    --cc=ilia.lin@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=steffen.klassert@secunet.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).