From: Furong Xu <0x1207@gmail.com>
To: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Simon Horman <horms@kernel.org>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
xfr@outlook.com, Furong Xu <0x1207@gmail.com>
Subject: [PATCH net-next v1] net: stmmac: Drop useless code related to ethtool rx-copybreak
Date: Wed, 18 Dec 2024 16:34:07 +0800 [thread overview]
Message-ID: <20241218083407.390509-1-0x1207@gmail.com> (raw)
After commit 2af6106ae949 ("net: stmmac: Introducing support for Page
Pool"), the driver always copies frames to get a better performance,
zero-copy for RX frames is no more, then these code turned to be
useless and users of ethtool may get confused about the unhandled
rx-copybreak parameter.
This patch mostly reverts
commit 22ad38381547 ("stmmac: do not perform zero-copy for rx frames")
Signed-off-by: Furong Xu <0x1207@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 -
.../ethernet/stmicro/stmmac/stmmac_ethtool.c | 39 -------------------
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 5 ---
3 files changed, 46 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 1d86439b8a14..b8d631e559c0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -126,7 +126,6 @@ struct stmmac_rx_queue {
unsigned int cur_rx;
unsigned int dirty_rx;
unsigned int buf_alloc_num;
- u32 rx_zeroc_thresh;
dma_addr_t dma_rx_phy;
u32 rx_tail_addr;
unsigned int state_saved;
@@ -266,7 +265,6 @@ struct stmmac_priv {
int sph_cap;
u32 sarc_type;
- unsigned int rx_copybreak;
u32 rx_riwt[MTL_MAX_TX_QUEUES];
int hwts_rx_en;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 1d77389ce953..16b4d8c21c90 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -1227,43 +1227,6 @@ static int stmmac_get_ts_info(struct net_device *dev,
return ethtool_op_get_ts_info(dev, info);
}
-static int stmmac_get_tunable(struct net_device *dev,
- const struct ethtool_tunable *tuna, void *data)
-{
- struct stmmac_priv *priv = netdev_priv(dev);
- int ret = 0;
-
- switch (tuna->id) {
- case ETHTOOL_RX_COPYBREAK:
- *(u32 *)data = priv->rx_copybreak;
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-
-static int stmmac_set_tunable(struct net_device *dev,
- const struct ethtool_tunable *tuna,
- const void *data)
-{
- struct stmmac_priv *priv = netdev_priv(dev);
- int ret = 0;
-
- switch (tuna->id) {
- case ETHTOOL_RX_COPYBREAK:
- priv->rx_copybreak = *(u32 *)data;
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-
static int stmmac_get_mm(struct net_device *ndev,
struct ethtool_mm_state *state)
{
@@ -1390,8 +1353,6 @@ static const struct ethtool_ops stmmac_ethtool_ops = {
.set_per_queue_coalesce = stmmac_set_per_queue_coalesce,
.get_channels = stmmac_get_channels,
.set_channels = stmmac_set_channels,
- .get_tunable = stmmac_get_tunable,
- .set_tunable = stmmac_set_tunable,
.get_link_ksettings = stmmac_ethtool_get_link_ksettings,
.set_link_ksettings = stmmac_ethtool_set_link_ksettings,
.get_mm = stmmac_get_mm,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 16b8bcfa8b11..6bc10ffe7a2b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -77,7 +77,6 @@ module_param(phyaddr, int, 0444);
MODULE_PARM_DESC(phyaddr, "Physical device address");
#define STMMAC_TX_THRESH(x) ((x)->dma_conf.dma_tx_size / 4)
-#define STMMAC_RX_THRESH(x) ((x)->dma_conf.dma_rx_size / 4)
/* Limit to make sure XDP TX and slow path can coexist */
#define STMMAC_XSK_TX_BUDGET_MAX 256
@@ -107,8 +106,6 @@ static int buf_sz = DEFAULT_BUFSIZE;
module_param(buf_sz, int, 0644);
MODULE_PARM_DESC(buf_sz, "DMA buffer size");
-#define STMMAC_RX_COPYBREAK 256
-
static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
NETIF_MSG_LINK | NETIF_MSG_IFUP |
NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
@@ -3927,8 +3924,6 @@ static int __stmmac_open(struct net_device *dev,
}
}
- priv->rx_copybreak = STMMAC_RX_COPYBREAK;
-
buf_sz = dma_conf->dma_buf_sz;
for (int i = 0; i < MTL_MAX_TX_QUEUES; i++)
if (priv->dma_conf.tx_queue[i].tbs & STMMAC_TBS_EN)
--
2.34.1
next reply other threads:[~2024-12-18 8:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-18 8:34 Furong Xu [this message]
2024-12-18 15:48 ` [PATCH net-next v1] net: stmmac: Drop useless code related to ethtool rx-copybreak Alexander Lobakin
2024-12-19 0:42 ` Jakub Kicinski
2024-12-19 14:20 ` Alexander Lobakin
2024-12-20 3:30 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241218083407.390509-1-0x1207@gmail.com \
--to=0x1207@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=xfr@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).