From: Divya Koppera <divya.koppera@microchip.com>
To: <andrew@lunn.ch>, <arun.ramadoss@microchip.com>,
<UNGLinuxDriver@microchip.com>, <hkallweit1@gmail.com>,
<linux@armlinux.org.uk>, <davem@davemloft.net>,
<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<richardcochran@gmail.com>, <vadim.fedorenko@linux.dev>
Subject: [PATCH net-next v8 1/5] net: phy: microchip_rds_ptp: Add header file for Microchip rds ptp library
Date: Thu, 19 Dec 2024 18:03:07 +0530 [thread overview]
Message-ID: <20241219123311.30213-2-divya.koppera@microchip.com> (raw)
In-Reply-To: <20241219123311.30213-1-divya.koppera@microchip.com>
This rds ptp header file will cover ptp macros for future phys in
Microchip where addresses will be same but base offset and mmd address
may changes.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
---
v7 -> v8
- Removed passing base address to macros, as that is been calculated in
wrapper function of phy read and writes for ptp rdp library.
v6 -> v7
- No changes
v5 -> v6
- Renamed header file name, macros and function names to
reflect ptp hardware code name.
v4 -> v5
- Reduced scope of config PTP Macro check to APIs
v3 -> v4
- Re-ordered mchp_ptp_clock structure.
v2 -> v3
- No changes
v1 -> v2
- Fixed sparse warnings and compilation errors/warnings reported by kernel
test robot
---
drivers/net/phy/microchip_rds_ptp.h | 223 ++++++++++++++++++++++++++++
1 file changed, 223 insertions(+)
create mode 100644 drivers/net/phy/microchip_rds_ptp.h
diff --git a/drivers/net/phy/microchip_rds_ptp.h b/drivers/net/phy/microchip_rds_ptp.h
new file mode 100644
index 000000000000..e95c065728b5
--- /dev/null
+++ b/drivers/net/phy/microchip_rds_ptp.h
@@ -0,0 +1,223 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Copyright (C) 2024 Microchip Technology
+ */
+
+#ifndef _MICROCHIP_RDS_PTP_H
+#define _MICROCHIP_RDS_PTP_H
+
+#include <linux/ptp_clock_kernel.h>
+#include <linux/ptp_clock.h>
+#include <linux/ptp_classify.h>
+#include <linux/net_tstamp.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#define MCHP_RDS_PTP_CMD_CTL 0x0
+#define MCHP_RDS_PTP_CMD_CTL_LTC_STEP_NSEC BIT(6)
+#define MCHP_RDS_PTP_CMD_CTL_LTC_STEP_SEC BIT(5)
+#define MCHP_RDS_PTP_CMD_CTL_CLOCK_LOAD BIT(4)
+#define MCHP_RDS_PTP_CMD_CTL_CLOCK_READ BIT(3)
+#define MCHP_RDS_PTP_CMD_CTL_EN BIT(1)
+#define MCHP_RDS_PTP_CMD_CTL_DIS BIT(0)
+
+#define MCHP_RDS_PTP_REF_CLK_CFG 0x2
+#define MCHP_RDS_PTP_REF_CLK_SRC_250MHZ 0x0
+#define MCHP_RDS_PTP_REF_CLK_PERIOD_OVERRIDE BIT(9)
+#define MCHP_RDS_PTP_REF_CLK_PERIOD 4
+#define MCHP_RDS_PTP_REF_CLK_CFG_SET (MCHP_RDS_PTP_REF_CLK_SRC_250MHZ |\
+ MCHP_RDS_PTP_REF_CLK_PERIOD_OVERRIDE |\
+ MCHP_RDS_PTP_REF_CLK_PERIOD)
+
+#define MCHP_RDS_PTP_LTC_SEC_HI 0x5
+#define MCHP_RDS_PTP_LTC_SEC_MID 0x6
+#define MCHP_RDS_PTP_LTC_SEC_LO 0x7
+#define MCHP_RDS_PTP_LTC_NS_HI 0x8
+#define MCHP_RDS_PTP_LTC_NS_LO 0x9
+#define MCHP_RDS_PTP_LTC_RATE_ADJ_HI 0xc
+#define MCHP_RDS_PTP_LTC_RATE_ADJ_HI_DIR BIT(15)
+#define MCHP_RDS_PTP_LTC_RATE_ADJ_LO 0xd
+#define MCHP_RDS_PTP_STEP_ADJ_HI 0x12
+#define MCHP_RDS_PTP_STEP_ADJ_HI_DIR BIT(15)
+#define MCHP_RDS_PTP_STEP_ADJ_LO 0x13
+#define MCHP_RDS_PTP_LTC_READ_SEC_HI 0x29
+#define MCHP_RDS_PTP_LTC_READ_SEC_MID 0x2a
+#define MCHP_RDS_PTP_LTC_READ_SEC_LO 0x2b
+#define MCHP_RDS_PTP_LTC_READ_NS_HI 0x2c
+#define MCHP_RDS_PTP_LTC_READ_NS_LO 0x2d
+#define MCHP_RDS_PTP_OP_MODE 0x41
+#define MCHP_RDS_PTP_OP_MODE_DIS 0
+#define MCHP_RDS_PTP_OP_MODE_STANDALONE 1
+#define MCHP_RDS_PTP_LATENCY_CORRECTION_CTL 0x44
+#define MCHP_RDS_PTP_PREDICTOR_EN BIT(6)
+#define MCHP_RDS_PTP_TX_PRED_DIS BIT(1)
+#define MCHP_RDS_PTP_RX_PRED_DIS BIT(0)
+#define MCHP_RDS_PTP_LATENCY_SETTING (MCHP_RDS_PTP_PREDICTOR_EN | \
+ MCHP_RDS_PTP_TX_PRED_DIS | \
+ MCHP_RDS_PTP_RX_PRED_DIS)
+
+#define MCHP_RDS_PTP_INT_EN 0x0
+#define MCHP_RDS_PTP_INT_STS 0x01
+#define MCHP_RDS_PTP_INT_TX_TS_OVRFL_EN BIT(3)
+#define MCHP_RDS_PTP_INT_TX_TS_EN BIT(2)
+#define MCHP_RDS_PTP_INT_RX_TS_OVRFL_EN BIT(1)
+#define MCHP_RDS_PTP_INT_RX_TS_EN BIT(0)
+#define MCHP_RDS_PTP_INT_ALL_MSK (MCHP_RDS_PTP_INT_TX_TS_OVRFL_EN | \
+ MCHP_RDS_PTP_INT_TX_TS_EN | \
+ MCHP_RDS_PTP_INT_RX_TS_OVRFL_EN |\
+ MCHP_RDS_PTP_INT_RX_TS_EN)
+
+#define MCHP_RDS_PTP_CAP_INFO 0x2e
+#define MCHP_RDS_PTP_TX_TS_CNT(v) (((v) & GENMASK(11, 8)) >> 8)
+#define MCHP_RDS_PTP_RX_TS_CNT(v) ((v) & GENMASK(3, 0))
+
+#define MCHP_RDS_PTP_RX_PARSE_CONFIG 0x42
+#define MCHP_RDS_PTP_RX_PARSE_L2_ADDR_EN 0x44
+#define MCHP_RDS_PTP_RX_PARSE_IPV4_ADDR_EN 0x45
+
+#define MCHP_RDS_PTP_RX_TIMESTAMP_CONFIG 0x4e
+#define MCHP_RDS_PTP_RX_TIMESTAMP_CONFIG_PTP_FCS_DIS BIT(0)
+
+#define MCHP_RDS_PTP_RX_VERSION 0x48
+#define MCHP_RDS_PTP_RX_TIMESTAMP_EN 0x4d
+
+#define MCHP_RDS_PTP_RX_INGRESS_NS_HI 0x54
+#define MCHP_RDS_PTP_RX_INGRESS_NS_HI_TS_VALID BIT(15)
+
+#define MCHP_RDS_PTP_RX_INGRESS_NS_LO 0x55
+#define MCHP_RDS_PTP_RX_INGRESS_SEC_HI 0x56
+#define MCHP_RDS_PTP_RX_INGRESS_SEC_LO 0x57
+#define MCHP_RDS_PTP_RX_MSG_HDR2 0x59
+
+#define MCHP_RDS_PTP_TX_PARSE_CONFIG 0x82
+#define MCHP_RDS_PTP_PARSE_CONFIG_LAYER2_EN BIT(0)
+#define MCHP_RDS_PTP_PARSE_CONFIG_IPV4_EN BIT(1)
+#define MCHP_RDS_PTP_PARSE_CONFIG_IPV6_EN BIT(2)
+
+#define MCHP_RDS_PTP_TX_PARSE_L2_ADDR_EN 0x84
+#define MCHP_RDS_PTP_TX_PARSE_IPV4_ADDR_EN 0x85
+
+#define MCHP_RDS_PTP_TX_VERSION 0x88
+#define MCHP_RDS_PTP_MAX_VERSION(x) (((x) & GENMASK(7, 0)) << 8)
+#define MCHP_RDS_PTP_MIN_VERSION(x) ((x) & GENMASK(7, 0))
+
+#define MCHP_RDS_PTP_TX_TIMESTAMP_EN 0x8d
+#define MCHP_RDS_PTP_TIMESTAMP_EN_SYNC BIT(0)
+#define MCHP_RDS_PTP_TIMESTAMP_EN_DREQ BIT(1)
+#define MCHP_RDS_PTP_TIMESTAMP_EN_PDREQ BIT(2)
+#define MCHP_RDS_PTP_TIMESTAMP_EN_PDRES BIT(3)
+#define MCHP_RDS_PTP_TIMESTAMP_EN_ALL (MCHP_RDS_PTP_TIMESTAMP_EN_SYNC |\
+ MCHP_RDS_PTP_TIMESTAMP_EN_DREQ |\
+ MCHP_RDS_PTP_TIMESTAMP_EN_PDREQ |\
+ MCHP_RDS_PTP_TIMESTAMP_EN_PDRES)
+
+#define MCHP_RDS_PTP_TX_TIMESTAMP_CONFIG 0x8e
+#define MCHP_RDS_PTP_TX_TIMESTAMP_CONFIG_PTP_FCS_DIS BIT(0)
+
+#define MCHP_RDS_PTP_TX_MOD 0x8f
+#define MCHP_RDS_TX_MOD_PTP_SYNC_TS_INSERT BIT(12)
+
+#define MCHP_RDS_PTP_TX_EGRESS_NS_HI 0x94
+#define MCHP_RDS_PTP_TX_EGRESS_NS_HI_TS_VALID BIT(15)
+
+#define MCHP_RDS_PTP_TX_EGRESS_NS_LO 0x95
+#define MCHP_RDS_PTP_TX_EGRESS_SEC_HI 0x96
+#define MCHP_RDS_PTP_TX_EGRESS_SEC_LO 0x97
+#define MCHP_RDS_PTP_TX_MSG_HDR2 0x99
+
+#define MCHP_RDS_PTP_TSU_GEN_CONFIG 0xc0
+#define MCHP_RDS_PTP_TSU_GEN_CFG_TSU_EN BIT(0)
+
+#define MCHP_RDS_PTP_TSU_HARD_RESET 0xc1
+#define MCHP_RDS_PTP_TSU_HARDRESET BIT(0)
+
+/* Represents 1ppm adjustment in 2^32 format with
+ * each nsec contains 4 clock cycles in 250MHz.
+ * The value is calculated as following: (1/1000000)/((2^-32)/4)
+ */
+#define MCHP_RDS_PTP_1PPM_FORMAT 17179
+#define MCHP_RDS_PTP_FIFO_SIZE 8
+#define MCHP_RDS_PTP_MAX_ADJ 31249999
+
+#define BASE_CLK(p) ((p)->clk_base_addr)
+#define BASE_PORT(p) ((p)->port_base_addr)
+#define PTP_MMD(p) ((p)->mmd)
+
+enum mchp_rds_ptp_base {
+ MCHP_RDS_PTP_PORT,
+ MCHP_RDS_PTP_CLOCK
+};
+
+enum mchp_rds_ptp_fifo_dir {
+ MCHP_RDS_PTP_INGRESS_FIFO,
+ MCHP_RDS_PTP_EGRESS_FIFO
+};
+
+struct mchp_rds_ptp_clock {
+ struct mii_timestamper mii_ts;
+ struct phy_device *phydev;
+ struct ptp_clock *ptp_clock;
+
+ struct sk_buff_head tx_queue;
+ struct sk_buff_head rx_queue;
+ struct list_head rx_ts_list;
+
+ struct ptp_clock_info caps;
+
+ /* Lock for Rx ts fifo */
+ spinlock_t rx_ts_lock;
+ int hwts_tx_type;
+
+ enum hwtstamp_rx_filters rx_filter;
+ int layer;
+ int version;
+ u16 port_base_addr;
+ u16 clk_base_addr;
+
+ /* Lock for phc */
+ struct mutex ptp_lock;
+ u8 mmd;
+};
+
+struct mchp_rds_ptp_rx_ts {
+ struct list_head list;
+ u32 seconds;
+ u32 nsec;
+ u16 seq_id;
+};
+
+#if IS_ENABLED(CONFIG_MICROCHIP_PHY_RDS_PTP)
+
+struct mchp_rds_ptp_clock *mchp_rds_ptp_probe(struct phy_device *phydev, u8 mmd,
+ u16 clk_base, u16 port_base);
+
+int mchp_rds_ptp_top_config_intr(struct mchp_rds_ptp_clock *clock,
+ u16 reg, u16 val, bool enable);
+
+irqreturn_t mchp_rds_ptp_handle_interrupt(struct mchp_rds_ptp_clock *clock);
+
+#else
+
+static inline struct mchp_rds_ptp_clock *mchp_rds_ptp_probe(struct phy_device
+ *phydev, u8 mmd,
+ u16 clk_base,
+ u16 port_base)
+{
+ return NULL;
+}
+
+static inline int mchp_rds_ptp_top_config_intr(struct mchp_rds_ptp_clock *clock,
+ u16 reg, u16 val, bool enable)
+{
+ return 0;
+}
+
+static inline irqreturn_t mchp_rds_ptp_handle_interrupt(struct
+ mchp_rds_ptp_clock
+ * clock)
+{
+ return IRQ_NONE;
+}
+
+#endif //CONFIG_MICROCHIP_PHY_RDS_PTP
+
+#endif //_MICROCHIP_RDS_PTP_H
--
2.17.1
next prev parent reply other threads:[~2024-12-19 12:30 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-19 12:33 [PATCH net-next v8 0/5] Add rds ptp library for Microchip phys Divya Koppera
2024-12-19 12:33 ` Divya Koppera [this message]
2024-12-19 12:33 ` [PATCH net-next v8 2/5] net: phy: microchip_rds_ptp : " Divya Koppera
2024-12-19 12:33 ` [PATCH net-next v8 3/5] net: phy: Kconfig: Add rds ptp library support and 1588 optional flag in " Divya Koppera
2024-12-19 12:33 ` [PATCH net-next v8 4/5] net: phy: Makefile: Add makefile support for rds ptp " Divya Koppera
2024-12-19 12:33 ` [PATCH net-next v8 5/5] net: phy: microchip_t1 : Add initialization of ptp for lan887x Divya Koppera
2024-12-23 18:40 ` [PATCH net-next v8 0/5] Add rds ptp library for Microchip phys patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241219123311.30213-2-divya.koppera@microchip.com \
--to=divya.koppera@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=arun.ramadoss@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).