[PATCH net-next v6 0/3] Add support for Nuvoton MA35D1 GMAC

[PATCH net-next v6 0/3] Add support for Nuvoton MA35D1 GMAC

[Joey Lu]

This patch series is submitted to add GMAC support for Nuvoton MA35D1
SoC platform. This work involves implementing a GMAC driver glue layer
based on Synopsys DWMAC driver framework to leverage MA35D1's dual GMAC
interface capabilities.

Overview:
  1. Added a GMAC driver glue layer for MA35D1 SoC, providing support for
  the platform's two GMAC interfaces.
  2. Added device tree settings, with specific configurations for our
  development boards:
    a. SOM board: Configured for two RGMII interfaces.
    b. IoT board: Configured with one RGMII and one RMII interface.
  3. Added dt-bindings for the GMAC interfaces.

v6:
  - Update dwmac-nuvoton driver
    - Use NVT as the previx for all functions, structs, and defines.
    - Remove unnecessary comments.

v5:
  - Update yaml
    - Remove the properties already defined in snps dwmac.
  - Update dwmac-nuvoton driver
    - Add a comment to explain the override of PMT flag.

v4:
  - Update yaml
    - Remove unnecessary property 'select'.
    - Remove unnecessary compatible entries and fix items.
    - Specify number of entries for 'reg'.
    - Remove already defined property 'phy-handle'.
    - Update example.
    - Modify the property internal path delay to match the driver.
  - Update dtsi
    - Move 'status' to be the last property.
  - Update dwmac-nuvoton driver
    - Use remove instead of remove_new.
    - Use dev_err_probe instead.

v3:
  - Update yaml
    - Fix for dt_binding_check warnings & errors.
    - Add compatible in snps dwmac.
  - Update dtsi
    - Update dtsi to follow examples in yaml.
  - Update dwmac-nuvoton driver
    - Fix for auto build test warnings.
    - Invalid path delay arguments will be returned.

v2:
  - Update yaml
    - Rename file to align with the compatible property.
    - Add an argument to syscon to replace mac-id,
      with corresponding descriptions.
    - Use tx-internal-delay-ps and rx-internal-delay-ps properties for
      configurable path delay with corresponding descriptions,
      allowing selection between GMAC internal and PHY.
    - Add all supported phy-mode options.
    - Remove unused properties.
  - Update dtsi
    - Modify syscon configuration to include an argument for
      GMAC interface selection.
  - Update dwmac-nuvoton driver
    - Remove redundant device information print statements.
    - Remove non-global parameters.
    - Retrieve GMAC interface selection from the syscon argument.
    - Parse Tx and Rx path delays by correct properties.
    - Update configurations to support Wake-on-LAN.


Joey Lu (3):
  dt-bindings: net: nuvoton: Add schema for Nuvoton MA35 family GMAC
  arm64: dts: nuvoton: Add Ethernet nodes
  net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family

 .../bindings/net/nuvoton,ma35d1-dwmac.yaml    | 126 ++++++++++++
 .../devicetree/bindings/net/snps,dwmac.yaml   |   1 +
 .../boot/dts/nuvoton/ma35d1-iot-512m.dts      |  12 ++
 .../boot/dts/nuvoton/ma35d1-som-256m.dts      |  10 +
 arch/arm64/boot/dts/nuvoton/ma35d1.dtsi       |  54 ++++++
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  11 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 .../ethernet/stmicro/stmmac/dwmac-nuvoton.c   | 179 ++++++++++++++++++
 8 files changed, 394 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-nuvoton.c

-- 
2.34.1

[PATCH net-next v6 1/3] dt-bindings: net: nuvoton: Add schema for Nuvoton MA35 family GMAC

[Joey Lu]

Create initial schema for Nuvoton MA35 family Gigabit MAC.

Signed-off-by: Joey Lu <a0987203069@gmail.com>
---
 .../bindings/net/nuvoton,ma35d1-dwmac.yaml    | 126 ++++++++++++++++++
 .../devicetree/bindings/net/snps,dwmac.yaml   |   1 +
 2 files changed, 127 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml

diff --git a/Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml b/Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml
new file mode 100644
index 000000000000..c3f2ad423cc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nuvoton,ma35d1-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton DWMAC glue layer controller
+
+maintainers:
+  - Joey Lu <yclu4@nuvoton.com>
+
+description:
+  Nuvoton 10/100/1000Mbps Gigabit Ethernet MAC Controller is based on
+  Synopsys DesignWare MAC (version 3.73a).
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nuvoton,ma35d1-dwmac
+
+  reg:
+    maxItems: 1
+    description:
+      Register range should be one of the GMAC interface.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: MAC clock
+      - description: PTP clock
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: ptp_ref
+
+  nuvoton,sys:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to access syscon registers.
+          - description: GMAC interface ID.
+            enum:
+              - 0
+              - 1
+    description:
+      A phandle to the syscon with one argument that configures system registers
+      for MA35D1's two GMACs. The argument specifies the GMAC interface ID.
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: stmmaceth
+
+  phy-mode:
+    enum:
+      - rmii
+      - rgmii
+      - rgmii-id
+      - rgmii-txid
+      - rgmii-rxid
+
+  tx-internal-delay-ps:
+    default: 0
+    minimum: 0
+    maximum: 2000
+    description:
+      RGMII TX path delay used only when PHY operates in RGMII mode with
+      internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
+      Allowed values are from 0 to 2000.
+
+  rx-internal-delay-ps:
+    default: 0
+    minimum: 0
+    maximum: 2000
+    description:
+      RGMII RX path delay used only when PHY operates in RGMII mode with
+      internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
+      Allowed values are from 0 to 2000.
+
+required:
+  - clocks
+  - clock-names
+  - nuvoton,sys
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+    #include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
+    ethernet@40120000 {
+        compatible = "nuvoton,ma35d1-dwmac";
+        reg = <0x40120000 0x10000>;
+        interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq";
+        clocks = <&clk EMAC0_GATE>, <&clk EPLL_DIV8>;
+        clock-names = "stmmaceth", "ptp_ref";
+
+        nuvoton,sys = <&sys 0>;
+        resets = <&sys MA35D1_RESET_GMAC0>;
+        reset-names = "stmmaceth";
+
+        phy-mode = "rgmii-id";
+        phy-handle = <&eth_phy0>;
+        mdio {
+            compatible = "snps,dwmac-mdio";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index eb1f3ae41ab9..4bf59ab910cc 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -67,6 +67,7 @@ properties:
         - ingenic,x2000-mac
         - loongson,ls2k-dwmac
         - loongson,ls7a-dwmac
+        - nuvoton,ma35d1-dwmac
         - qcom,qcs404-ethqos
         - qcom,sa8775p-ethqos
         - qcom,sc8280xp-ethqos
-- 
2.34.1

[PATCH net-next v6 2/3] arm64: dts: nuvoton: Add Ethernet nodes

[Joey Lu]

Add GMAC nodes for our MA35D1 development boards:
two RGMII interfaces for SOM board, and one RGMII and one RMII
interface for IoT board.

Signed-off-by: Joey Lu <a0987203069@gmail.com>
---
 .../boot/dts/nuvoton/ma35d1-iot-512m.dts      | 12 +++++
 .../boot/dts/nuvoton/ma35d1-som-256m.dts      | 10 ++++
 arch/arm64/boot/dts/nuvoton/ma35d1.dtsi       | 54 +++++++++++++++++++
 3 files changed, 76 insertions(+)

diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
index 9482bec1aa57..5cc712ae92d8 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
@@ -18,6 +18,8 @@ aliases {
 		serial12 = &uart12;
 		serial13 = &uart13;
 		serial14 = &uart14;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
 	};
 
 	chosen {
@@ -126,3 +128,13 @@ &uart14 {
 	pinctrl-0 = <&pinctrl_uart14>;
 	status = "okay";
 };
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gmac1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
index f6f20a17e501..1d9ac350a1f1 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -18,6 +18,8 @@ aliases {
 		serial12 = &uart12;
 		serial14 = &uart14;
 		serial16 = &uart16;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
 	};
 
 	chosen {
@@ -129,3 +131,11 @@ &uart16 {
 	pinctrl-0 = <&pinctrl_uart16>;
 	status = "okay";
 };
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
index e51b98f5bdce..89712e262ee6 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -379,5 +379,59 @@ uart16: serial@40880000 {
 			clocks = <&clk UART16_GATE>;
 			status = "disabled";
 		};
+
+		gmac0: ethernet@40120000 {
+			compatible = "nuvoton,ma35d1-dwmac";
+			reg = <0x0 0x40120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clk EMAC0_GATE>, <&clk EPLL_DIV8>;
+			clock-names = "stmmaceth", "ptp_ref";
+
+			nuvoton,sys = <&sys 0>;
+			resets = <&sys MA35D1_RESET_GMAC0>;
+			reset-names = "stmmaceth";
+
+			phy-mode = "rgmii-id";
+			phy-handle = <&eth_phy0>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eth_phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+		};
+
+		gmac1: ethernet@40130000 {
+			compatible = "nuvoton,ma35d1-dwmac";
+			reg = <0x0 0x40130000 0x0 0x10000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clk EMAC1_GATE>, <&clk EPLL_DIV8>;
+			clock-names = "stmmaceth", "ptp_ref";
+
+			nuvoton,sys = <&sys 1>;
+			resets = <&sys MA35D1_RESET_GMAC1>;
+			reset-names = "stmmaceth";
+
+			phy-mode = "rgmii-id";
+			phy-handle = <&eth_phy1>;
+			status = "disabled";
+
+			mdio1: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eth_phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
 	};
 };
-- 
2.34.1

[PATCH net-next v6 3/3] net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family

[Joey Lu]

Add support for Gigabit Ethernet on Nuvoton MA35 series using dwmac driver.

Signed-off-by: Joey Lu <a0987203069@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  11 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 .../ethernet/stmicro/stmmac/dwmac-nuvoton.c   | 179 ++++++++++++++++++
 3 files changed, 191 insertions(+)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-nuvoton.c

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 6658536a4e17..c8cbc0ec1311 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -121,6 +121,17 @@ config DWMAC_MESON
 	  the stmmac device driver. This driver is used for Meson6,
 	  Meson8, Meson8b and GXBB SoCs.
 
+config DWMAC_NUVOTON
+	tristate "Nuvoton MA35 dwmac support"
+	default ARCH_MA35
+	depends on OF && (ARCH_MA35 || COMPILE_TEST)
+	select MFD_SYSCON
+	help
+	  Support for Ethernet controller on Nuvoton MA35 series SoC.
+
+	  This selects the Nuvoton MA35 series SoC glue layer support
+	  for the stmmac device driver.
+
 config DWMAC_QCOM_ETHQOS
 	tristate "Qualcomm ETHQOS support"
 	default ARCH_QCOM
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 2389fd261344..9812b824459f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_DWMAC_IPQ806X)	+= dwmac-ipq806x.o
 obj-$(CONFIG_DWMAC_LPC18XX)	+= dwmac-lpc18xx.o
 obj-$(CONFIG_DWMAC_MEDIATEK)	+= dwmac-mediatek.o
 obj-$(CONFIG_DWMAC_MESON)	+= dwmac-meson.o dwmac-meson8b.o
+obj-$(CONFIG_DWMAC_NUVOTON)	+= dwmac-nuvoton.o
 obj-$(CONFIG_DWMAC_QCOM_ETHQOS)	+= dwmac-qcom-ethqos.o
 obj-$(CONFIG_DWMAC_ROCKCHIP)	+= dwmac-rk.o
 obj-$(CONFIG_DWMAC_RZN1)	+= dwmac-rzn1.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-nuvoton.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-nuvoton.c
new file mode 100644
index 000000000000..23fec10296e5
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-nuvoton.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Nuvoton DWMAC specific glue layer
+ *
+ * Copyright (C) 2024 Nuvoton Technology Corp.
+ *
+ * Author: Joey Lu <yclu4@nuvoton.com>
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/stmmac.h>
+
+#include "stmmac.h"
+#include "stmmac_platform.h"
+
+#define NVT_REG_SYS_GMAC0MISCR  0x108
+#define NVT_REG_SYS_GMAC1MISCR  0x10C
+
+#define NVT_MISCR_RMII          BIT(0)
+
+/* 2000ps is mapped to 0x0 ~ 0xF */
+#define NVT_PATH_DELAY_DEC      134
+#define NVT_TX_DELAY_MASK       GENMASK(19, 16)
+#define NVT_RX_DELAY_MASK       GENMASK(23, 20)
+
+struct nvt_priv_data {
+	struct platform_device *pdev;
+	struct regmap *regmap;
+};
+
+static struct nvt_priv_data *
+nvt_gmac_setup(struct platform_device *pdev, struct plat_stmmacenet_data *plat)
+{
+	struct device *dev = &pdev->dev;
+	struct nvt_priv_data *bsp_priv;
+	phy_interface_t phy_mode;
+	u32 tx_delay, rx_delay;
+	u32 macid, arg, reg;
+
+	bsp_priv = devm_kzalloc(dev, sizeof(*bsp_priv), GFP_KERNEL);
+	if (!bsp_priv)
+		return ERR_PTR(-ENOMEM);
+
+	bsp_priv->regmap =
+		syscon_regmap_lookup_by_phandle_args(dev->of_node, "nuvoton,sys", 1, &macid);
+	if (IS_ERR(bsp_priv->regmap)) {
+		dev_err_probe(dev, PTR_ERR(bsp_priv->regmap), "Failed to get sys register\n");
+		return ERR_PTR(-ENODEV);
+	}
+	if (macid > 1) {
+		dev_err_probe(dev, -EINVAL, "Invalid sys arguments\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (of_property_read_u32(dev->of_node, "tx-internal-delay-ps", &arg)) {
+		tx_delay = 0;
+	} else {
+		if (arg <= 2000) {
+			tx_delay = (arg == 2000) ? 0xF : (arg / NVT_PATH_DELAY_DEC);
+			dev_dbg(dev, "Set Tx path delay to 0x%x\n", tx_delay);
+		} else {
+			dev_err(dev, "Invalid Tx path delay argument.\n");
+			return ERR_PTR(-EINVAL);
+		}
+	}
+	if (of_property_read_u32(dev->of_node, "rx-internal-delay-ps", &arg)) {
+		rx_delay = 0;
+	} else {
+		if (arg <= 2000) {
+			rx_delay = (arg == 2000) ? 0xF : (arg / NVT_PATH_DELAY_DEC);
+			dev_dbg(dev, "Set Rx path delay to 0x%x\n", rx_delay);
+		} else {
+			dev_err(dev, "Invalid Rx path delay argument.\n");
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
+	regmap_read(bsp_priv->regmap,
+		    macid == 0 ? NVT_REG_SYS_GMAC0MISCR : NVT_REG_SYS_GMAC1MISCR, &reg);
+	reg &= ~(NVT_TX_DELAY_MASK | NVT_RX_DELAY_MASK);
+
+	if (of_get_phy_mode(pdev->dev.of_node, &phy_mode)) {
+		dev_err(dev, "missing phy mode property\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	switch (phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		reg &= ~NVT_MISCR_RMII;
+		break;
+	case PHY_INTERFACE_MODE_RMII:
+		reg |= NVT_MISCR_RMII;
+		break;
+	default:
+		dev_err(dev, "Unsupported phy-mode (%d)\n", phy_mode);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (!(reg & NVT_MISCR_RMII)) {
+		reg |= FIELD_PREP(NVT_TX_DELAY_MASK, tx_delay);
+		reg |= FIELD_PREP(NVT_RX_DELAY_MASK, rx_delay);
+	}
+
+	regmap_write(bsp_priv->regmap,
+		     macid == 0 ? NVT_REG_SYS_GMAC0MISCR : NVT_REG_SYS_GMAC1MISCR, reg);
+
+	bsp_priv->pdev = pdev;
+
+	return bsp_priv;
+}
+
+static int nvt_gmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct nvt_priv_data *priv_data;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	/* Nuvoton DWMAC configs */
+	plat_dat->has_gmac = 1;
+	plat_dat->tx_fifo_size = 2048;
+	plat_dat->rx_fifo_size = 4096;
+	plat_dat->multicast_filter_bins = 0;
+	plat_dat->unicast_filter_entries = 8;
+	plat_dat->flags &= ~STMMAC_FLAG_USE_PHY_WOL;
+
+	priv_data = nvt_gmac_setup(pdev, plat_dat);
+	if (IS_ERR(priv_data))
+		return PTR_ERR(priv_data);
+
+	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	if (ret)
+		return ret;
+
+	/* The PMT flag is determined by the RWK property.
+	 * However, our hardware is configured to support only MGK.
+	 * This is an override on PMT to enable WoL capability.
+	 */
+	plat_dat->pmt = 1;
+	device_set_wakeup_capable(&pdev->dev, 1);
+
+	return 0;
+}
+
+static const struct of_device_id nvt_dwmac_match[] = {
+	{ .compatible = "nuvoton,ma35d1-dwmac"},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, nvt_dwmac_match);
+
+static struct platform_driver nvt_dwmac_driver = {
+	.probe  = nvt_gmac_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name           = "nuvoton-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table = nvt_dwmac_match,
+	},
+};
+module_platform_driver(nvt_dwmac_driver);
+
+MODULE_AUTHOR("Joey Lu <yclu4@nuvoton.com>");
+MODULE_DESCRIPTION("Nuvoton DWMAC specific glue layer");
+MODULE_LICENSE("GPL v2");
-- 
2.34.1

Re: [PATCH net-next v6 3/3] net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family

[Andrew Lunn]

On Fri, Jan 03, 2025 at 02:32:41PM +0800, Joey Lu wrote:
> Add support for Gigabit Ethernet on Nuvoton MA35 series using dwmac driver.
> 
> Signed-off-by: Joey Lu <a0987203069@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v6 3/3] net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family

[Christophe JAILLET]

Le 03/01/2025 à 07:32, Joey Lu a écrit :
> Add support for Gigabit Ethernet on Nuvoton MA35 series using dwmac driver.
> 
> Signed-off-by: Joey Lu <a0987203069@gmail.com>

...

> +	/* Nuvoton DWMAC configs */
> +	plat_dat->has_gmac = 1;
> +	plat_dat->tx_fifo_size = 2048;
> +	plat_dat->rx_fifo_size = 4096;
> +	plat_dat->multicast_filter_bins = 0;
> +	plat_dat->unicast_filter_entries = 8;
> +	plat_dat->flags &= ~STMMAC_FLAG_USE_PHY_WOL;
> +
> +	priv_data = nvt_gmac_setup(pdev, plat_dat);
> +	if (IS_ERR(priv_data))
> +		return PTR_ERR(priv_data);
> +
> +	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);

stmmac_pltfr_remove() is called by the .remove function.
Is it correct to call stmmac_dvr_probe() here, and not stmmac_pltfr_probe()?

> +	if (ret)
> +		return ret;
> +
> +	/* The PMT flag is determined by the RWK property.
> +	 * However, our hardware is configured to support only MGK.
> +	 * This is an override on PMT to enable WoL capability.
> +	 */
> +	plat_dat->pmt = 1;
> +	device_set_wakeup_capable(&pdev->dev, 1);
> +
> +	return 0;
> +}

...

> +static struct platform_driver nvt_dwmac_driver = {
> +	.probe  = nvt_gmac_probe,
> +	.remove = stmmac_pltfr_remove,
> +	.driver = {
> +		.name           = "nuvoton-dwmac",
> +		.pm		= &stmmac_pltfr_pm_ops,
> +		.of_match_table = nvt_dwmac_match,
> +	},
> +};

...

CJ

Re: [PATCH net-next v6 1/3] dt-bindings: net: nuvoton: Add schema for Nuvoton MA35 family GMAC

[Rob Herring (Arm)]

On Fri, 03 Jan 2025 14:32:39 +0800, Joey Lu wrote:
> Create initial schema for Nuvoton MA35 family Gigabit MAC.
> 
> Signed-off-by: Joey Lu <a0987203069@gmail.com>
> ---
>  .../bindings/net/nuvoton,ma35d1-dwmac.yaml    | 126 ++++++++++++++++++
>  .../devicetree/bindings/net/snps,dwmac.yaml   |   1 +
>  2 files changed, 127 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml
> 


Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.

If a tag was not added on purpose, please state why and what changed.

Missing tags:

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH net-next v6 0/3] Add support for Nuvoton MA35D1 GMAC

[Jakub Kicinski]

On Fri,  3 Jan 2025 14:32:38 +0800 Joey Lu wrote:
> This patch series is submitted to add GMAC support for Nuvoton MA35D1
> SoC platform. This work involves implementing a GMAC driver glue layer
> based on Synopsys DWMAC driver framework to leverage MA35D1's dual GMAC
> interface capabilities.

Would be good if you could reply to Christophe's question.

Then please rebase on top of net-next/main and repost.
The first patch doesn't currently apply cleanly.
Please leave out the second patch, it has to go via
the appropriate platform tree, rather than the networking
tree.
-- 
pw-bot: cr

Re: [PATCH net-next v6 3/3] net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family

[Joey Lu]

Christophe JAILLET 於 1/4/2025 12:38 AM 寫道:
> Le 03/01/2025 à 07:32, Joey Lu a écrit :
>> Add support for Gigabit Ethernet on Nuvoton MA35 series using dwmac 
>> driver.
>>
>> Signed-off-by: Joey Lu <a0987203069@gmail.com>
>
> ...
>
>> +    /* Nuvoton DWMAC configs */
>> +    plat_dat->has_gmac = 1;
>> +    plat_dat->tx_fifo_size = 2048;
>> +    plat_dat->rx_fifo_size = 4096;
>> +    plat_dat->multicast_filter_bins = 0;
>> +    plat_dat->unicast_filter_entries = 8;
>> +    plat_dat->flags &= ~STMMAC_FLAG_USE_PHY_WOL;
>> +
>> +    priv_data = nvt_gmac_setup(pdev, plat_dat);
>> +    if (IS_ERR(priv_data))
>> +        return PTR_ERR(priv_data);
>> +
>> +    ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
>
> stmmac_pltfr_remove() is called by the .remove function.
> Is it correct to call stmmac_dvr_probe() here, and not 
> stmmac_pltfr_probe()?

Thank you for the feedback. You're correct. I will update the code to 
call stmmac_pltfr_probe().

BR,

Joey

>
>> +    if (ret)
>> +        return ret;
>> +
>> +    /* The PMT flag is determined by the RWK property.
>> +     * However, our hardware is configured to support only MGK.
>> +     * This is an override on PMT to enable WoL capability.
>> +     */
>> +    plat_dat->pmt = 1;
>> +    device_set_wakeup_capable(&pdev->dev, 1);
>> +
>> +    return 0;
>> +}
>
> ...
>
>> +static struct platform_driver nvt_dwmac_driver = {
>> +    .probe  = nvt_gmac_probe,
>> +    .remove = stmmac_pltfr_remove,
>> +    .driver = {
>> +        .name           = "nuvoton-dwmac",
>> +        .pm        = &stmmac_pltfr_pm_ops,
>> +        .of_match_table = nvt_dwmac_match,
>> +    },
>> +};
>
> ...
>
> CJ

Re: [PATCH net-next v6 1/3] dt-bindings: net: nuvoton: Add schema for Nuvoton MA35 family GMAC

[Joey Lu]

Rob Herring (Arm) 於 1/4/2025 12:55 AM 寫道:
> Please add Acked-by/Reviewed-by tags when posting new versions. However,
> there's no need to repost patches*only* to add the tags. The upstream
> maintainer will do that for acks received on the version they apply.

Got it. Thank you for the reminder.🙂

Joey

Re: [PATCH net-next v6 0/3] Add support for Nuvoton MA35D1 GMAC

[Joey Lu]

Jakub Kicinski 於 1/7/2025 8:30 AM 寫道:
> On Fri,  3 Jan 2025 14:32:38 +0800 Joey Lu wrote:
>> This patch series is submitted to add GMAC support for Nuvoton MA35D1
>> SoC platform. This work involves implementing a GMAC driver glue layer
>> based on Synopsys DWMAC driver framework to leverage MA35D1's dual GMAC
>> interface capabilities.
> Would be good if you could reply to Christophe's question.
>
> Then please rebase on top of net-next/main and repost.
> The first patch doesn't currently apply cleanly.
> Please leave out the second patch, it has to go via
> the appropriate platform tree, rather than the networking
> tree.

I got it. Thank you!

BR,

Joey