From: Taehee Yoo <ap420073@gmail.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, netdev@vger.kernel.org,
almasrymina@google.com, donald.hunter@gmail.com, corbet@lwn.net,
michael.chan@broadcom.com, andrew+netdev@lunn.ch,
hawk@kernel.org, ilias.apalodimas@linaro.org, ast@kernel.org,
daniel@iogearbox.net, john.fastabend@gmail.com, dw@davidwei.uk,
sdf@fomichev.me, asml.silence@gmail.com, brett.creeley@amd.com,
linux-doc@vger.kernel.org
Cc: kory.maincent@bootlin.com, maxime.chevallier@bootlin.com,
danieller@nvidia.com, hengqi@linux.alibaba.com,
ecree.xilinx@gmail.com, przemyslaw.kitszel@intel.com,
hkallweit1@gmail.com, ahmed.zaki@intel.com,
rrameshbabu@nvidia.com, idosch@nvidia.com, jiri@resnulli.us,
bigeasy@linutronix.de, lorenzo@kernel.org, jdamato@fastly.com,
aleksander.lobakin@intel.com, kaiyuanz@google.com,
willemb@google.com, daniel.zahka@gmail.com, ap420073@gmail.com,
Andy Gospodarek <gospo@broadcom.com>
Subject: [PATCH net-next v8 08/10] bnxt_en: add support for hds-thresh ethtool command
Date: Sat, 11 Jan 2025 14:45:11 +0000 [thread overview]
Message-ID: <20250111144513.1289403-9-ap420073@gmail.com> (raw)
In-Reply-To: <20250111144513.1289403-1-ap420073@gmail.com>
The bnxt_en driver has configured the hds_threshold value automatically
when TPA is enabled based on the rx-copybreak default value.
Now the hds-thresh ethtool command is added, so it adds an
implementation of hds-thresh option.
Configuration of the hds-thresh is applied only when
the tcp-data-split is enabled. The default value of
hds-thresh is 256, which is the default value of
rx-copybreak, which used to be the hds_thresh value.
The maximum hds-thresh is 1023.
# Example:
# ethtool -G enp14s0f0np0 tcp-data-split on hds-thresh 256
# ethtool -g enp14s0f0np0
Ring parameters for enp14s0f0np0:
Pre-set maximums:
...
HDS thresh: 1023
Current hardware settings:
...
TCP data split: on
HDS thresh: 256
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
---
v8:
- Do not set hds_thresh in the bnxt_set_ringparam.
v7:
- Use dev->ethtool->hds_thresh instead of bp->hds_thresh
v6:
- HDS_MAX is changed to 1023.
- Add Test tag from Andy.
v5:
- No changes.
v4:
- Reduce hole in struct bnxt.
- Add ETHTOOL_RING_USE_HDS_THRS to indicate bnxt_en driver support
header-data-split-thresh option.
- Add Test tag from Stanislav.
v3:
- Drop validation logic tcp-data-split and tcp-data-split-thresh.
v2:
- Patch added.
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 +++-
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 2 ++
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 6 +++++-
3 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 7198d05cd27b..df03f218a570 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4603,6 +4603,7 @@ void bnxt_set_tpa_flags(struct bnxt *bp)
static void bnxt_init_ring_params(struct bnxt *bp)
{
bp->rx_copybreak = BNXT_DEFAULT_RX_COPYBREAK;
+ bp->dev->ethtool->hds_thresh = BNXT_DEFAULT_RX_COPYBREAK;
}
/* bp->rx_ring_size, bp->tx_ring_size, dev->mtu, BNXT_FLAG_{G|L}RO flags must
@@ -6562,6 +6563,7 @@ static void bnxt_hwrm_update_rss_hash_cfg(struct bnxt *bp)
static int bnxt_hwrm_vnic_set_hds(struct bnxt *bp, struct bnxt_vnic_info *vnic)
{
+ u16 hds_thresh = (u16)bp->dev->ethtool->hds_thresh;
struct hwrm_vnic_plcmodes_cfg_input *req;
int rc;
@@ -6578,7 +6580,7 @@ static int bnxt_hwrm_vnic_set_hds(struct bnxt *bp, struct bnxt_vnic_info *vnic)
VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV6);
req->enables |=
cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_HDS_THRESHOLD_VALID);
- req->hds_threshold = cpu_to_le16(bp->rx_copybreak);
+ req->hds_threshold = cpu_to_le16(hds_thresh);
}
req->vnic_id = cpu_to_le32(vnic->fw_vnic_id);
return hwrm_req_send(bp, req);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 7dc06e07bae2..8f481dd9c224 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -2779,6 +2779,8 @@ struct bnxt {
#define SFF_MODULE_ID_QSFP28 0x11
#define BNXT_MAX_PHY_I2C_RESP_SIZE 64
+#define BNXT_HDS_THRESHOLD_MAX 1023
+
static inline u32 bnxt_tx_avail(struct bnxt *bp,
const struct bnxt_tx_ring_info *txr)
{
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 413007190f50..540c140d52dc 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -833,6 +833,9 @@ static void bnxt_get_ringparam(struct net_device *dev,
ering->rx_pending = bp->rx_ring_size;
ering->rx_jumbo_pending = bp->rx_agg_ring_size;
ering->tx_pending = bp->tx_ring_size;
+
+ kernel_ering->hds_thresh = dev->ethtool->hds_thresh;
+ kernel_ering->hds_thresh_max = BNXT_HDS_THRESHOLD_MAX;
}
static int bnxt_set_ringparam(struct net_device *dev,
@@ -5390,7 +5393,8 @@ const struct ethtool_ops bnxt_ethtool_ops = {
ETHTOOL_COALESCE_STATS_BLOCK_USECS |
ETHTOOL_COALESCE_USE_ADAPTIVE_RX |
ETHTOOL_COALESCE_USE_CQE,
- .supported_ring_params = ETHTOOL_RING_USE_TCP_DATA_SPLIT,
+ .supported_ring_params = ETHTOOL_RING_USE_TCP_DATA_SPLIT |
+ ETHTOOL_RING_USE_HDS_THRS,
.get_link_ksettings = bnxt_get_link_ksettings,
.set_link_ksettings = bnxt_set_link_ksettings,
.get_fec_stats = bnxt_get_fec_stats,
--
2.34.1
next prev parent reply other threads:[~2025-01-11 14:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-11 14:45 [PATCH net-next v8 0/10] bnxt_en: implement tcp-data-split and thresh option Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 01/10] net: ethtool: add hds_config member in ethtool_netdev_state Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 02/10] net: ethtool: add support for configuring hds-thresh Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 03/10] net: devmem: add ring parameter filtering Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 04/10] net: ethtool: " Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 05/10] net: disallow setup single buffer XDP when tcp-data-split is enabled Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 06/10] bnxt_en: add support for rx-copybreak ethtool command Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 07/10] bnxt_en: add support for tcp-data-split " Taehee Yoo
2025-01-11 14:45 ` Taehee Yoo [this message]
2025-01-11 14:45 ` [PATCH net-next v8 09/10] netdevsim: add HDS feature Taehee Yoo
2025-01-11 14:45 ` [PATCH net-next v8 10/10] selftest: net-drv: hds: add test for " Taehee Yoo
2025-01-13 23:08 ` [PATCH net-next v8 0/10] bnxt_en: implement tcp-data-split and thresh option Jakub Kicinski
2025-01-14 3:20 ` Taehee Yoo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250111144513.1289403-9-ap420073@gmail.com \
--to=ap420073@gmail.com \
--cc=ahmed.zaki@intel.com \
--cc=aleksander.lobakin@intel.com \
--cc=almasrymina@google.com \
--cc=andrew+netdev@lunn.ch \
--cc=asml.silence@gmail.com \
--cc=ast@kernel.org \
--cc=bigeasy@linutronix.de \
--cc=brett.creeley@amd.com \
--cc=corbet@lwn.net \
--cc=daniel.zahka@gmail.com \
--cc=daniel@iogearbox.net \
--cc=danieller@nvidia.com \
--cc=davem@davemloft.net \
--cc=donald.hunter@gmail.com \
--cc=dw@davidwei.uk \
--cc=ecree.xilinx@gmail.com \
--cc=edumazet@google.com \
--cc=gospo@broadcom.com \
--cc=hawk@kernel.org \
--cc=hengqi@linux.alibaba.com \
--cc=hkallweit1@gmail.com \
--cc=idosch@nvidia.com \
--cc=ilias.apalodimas@linaro.org \
--cc=jdamato@fastly.com \
--cc=jiri@resnulli.us \
--cc=john.fastabend@gmail.com \
--cc=kaiyuanz@google.com \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=maxime.chevallier@bootlin.com \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=rrameshbabu@nvidia.com \
--cc=sdf@fomichev.me \
--cc=willemb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).