netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean Anderson <sean.anderson@linux.dev>
To: "David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>,
	netdev@vger.kernel.org
Cc: Michal Simek <michal.simek@amd.com>,
	linux-kernel@vger.kernel.org,
	Shannon Nelson <shannon.nelson@amd.com>,
	linux-arm-kernel@lists.infradead.org,
	Sean Anderson <sean.anderson@linux.dev>
Subject: [PATCH net-next v4 5/6] net: xilinx: axienet: Get coalesce parameters from driver state
Date: Thu, 16 Jan 2025 18:29:53 -0500	[thread overview]
Message-ID: <20250116232954.2696930-6-sean.anderson@linux.dev> (raw)
In-Reply-To: <20250116232954.2696930-1-sean.anderson@linux.dev>

The cr variables now contain the same values as the control registers
themselves. Extract/calculate the values from the variables instead of
saving the user-specified values. This allows us to remove some
bookeeping, and also lets the user know what the actual coalesce
settings are.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed by: Shannon Nelson <shannon.nelson@amd.com>
---

(no changes since v2)

Changes in v2:
- New

 drivers/net/ethernet/xilinx/xilinx_axienet.h  |  8 ---
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 70 +++++++++++++------
 2 files changed, 47 insertions(+), 31 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 6b8e550c2155..45d8d80dbb1a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -533,10 +533,6 @@ struct skbuf_dma_descriptor {
  *		  supported, the maximum frame size would be 9k. Else it is
  *		  1522 bytes (assuming support for basic VLAN)
  * @rxmem:	Stores rx memory size for jumbo frame handling.
- * @coalesce_count_rx:	Store the irq coalesce on RX side.
- * @coalesce_usec_rx:	IRQ coalesce delay for RX
- * @coalesce_count_tx:	Store the irq coalesce on TX side.
- * @coalesce_usec_tx:	IRQ coalesce delay for TX
  * @use_dmaengine: flag to check dmaengine framework usage.
  * @tx_chan:	TX DMA channel.
  * @rx_chan:	RX DMA channel.
@@ -615,10 +611,6 @@ struct axienet_local {
 	u32 max_frm_size;
 	u32 rxmem;
 
-	u32 coalesce_count_rx;
-	u32 coalesce_usec_rx;
-	u32 coalesce_count_tx;
-	u32 coalesce_usec_tx;
 	u8  use_dmaengine;
 	struct dma_chan *tx_chan;
 	struct dma_chan *rx_chan;
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index b70e65757454..81224b672eb0 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -223,6 +223,13 @@ static void axienet_dma_bd_release(struct net_device *ndev)
 			  lp->rx_bd_p);
 }
 
+static u64 axienet_dma_rate(struct axienet_local *lp)
+{
+	if (lp->axi_clk)
+		return clk_get_rate(lp->axi_clk);
+	return 125000000; /* arbitrary guess if no clock rate set */
+}
+
 /**
  * axienet_calc_cr() - Calculate control register value
  * @lp: Device private data
@@ -242,12 +249,9 @@ static u32 axienet_calc_cr(struct axienet_local *lp, u32 count, u32 usec)
 	 * the first packet. Otherwise leave at 0 to disable delay interrupt.
 	 */
 	if (count > 1) {
-		u64 clk_rate = 125000000; /* arbitrary guess if no clock rate set */
+		u64 clk_rate = axienet_dma_rate(lp);
 		u32 timer;
 
-		if (lp->axi_clk)
-			clk_rate = clk_get_rate(lp->axi_clk);
-
 		/* 1 Timeout Interval = 125 * (clock period of SG clock) */
 		timer = DIV64_U64_ROUND_CLOSEST((u64)usec * clk_rate,
 						XAXIDMA_DELAY_SCALE);
@@ -260,6 +264,23 @@ static u32 axienet_calc_cr(struct axienet_local *lp, u32 count, u32 usec)
 	return cr;
 }
 
+/**
+ * axienet_cr_params() - Extract coalesce parameters from the CR
+ * @lp: Device private data
+ * @cr: The control register to parse
+ * @count: Number of packets before an interrupt
+ * @usec: Idle time (in usec) before an interrupt
+ */
+static void axienet_coalesce_params(struct axienet_local *lp, u32 cr,
+				    u32 *count, u32 *usec)
+{
+	u64 clk_rate = axienet_dma_rate(lp);
+	u64 timer = FIELD_GET(XAXIDMA_DELAY_MASK, cr);
+
+	*count = FIELD_GET(XAXIDMA_COALESCE_MASK, cr);
+	*usec = DIV64_U64_ROUND_CLOSEST(timer * XAXIDMA_DELAY_SCALE, clk_rate);
+}
+
 /**
  * axienet_dma_start - Set up DMA registers and start DMA operation
  * @lp:		Pointer to the axienet_local structure
@@ -2104,11 +2125,21 @@ axienet_ethtools_get_coalesce(struct net_device *ndev,
 			      struct netlink_ext_ack *extack)
 {
 	struct axienet_local *lp = netdev_priv(ndev);
+	u32 cr;
 
-	ecoalesce->rx_max_coalesced_frames = lp->coalesce_count_rx;
-	ecoalesce->rx_coalesce_usecs = lp->coalesce_usec_rx;
-	ecoalesce->tx_max_coalesced_frames = lp->coalesce_count_tx;
-	ecoalesce->tx_coalesce_usecs = lp->coalesce_usec_tx;
+	spin_lock_irq(&lp->rx_cr_lock);
+	cr = lp->rx_dma_cr;
+	spin_unlock_irq(&lp->rx_cr_lock);
+	axienet_coalesce_params(lp, cr,
+				&ecoalesce->rx_max_coalesced_frames,
+				&ecoalesce->rx_coalesce_usecs);
+
+	spin_lock_irq(&lp->tx_cr_lock);
+	cr = lp->tx_dma_cr;
+	spin_unlock_irq(&lp->tx_cr_lock);
+	axienet_coalesce_params(lp, cr,
+				&ecoalesce->tx_max_coalesced_frames,
+				&ecoalesce->tx_coalesce_usecs);
 	return 0;
 }
 
@@ -2155,15 +2186,12 @@ axienet_ethtools_set_coalesce(struct net_device *ndev,
 		return -EINVAL;
 	}
 
-	lp->coalesce_count_rx = ecoalesce->rx_max_coalesced_frames;
-	lp->coalesce_usec_rx = ecoalesce->rx_coalesce_usecs;
-	lp->coalesce_count_tx = ecoalesce->tx_max_coalesced_frames;
-	lp->coalesce_usec_tx = ecoalesce->tx_coalesce_usecs;
-
-	cr = axienet_calc_cr(lp, lp->coalesce_count_rx, lp->coalesce_usec_rx);
+	cr = axienet_calc_cr(lp, ecoalesce->rx_max_coalesced_frames,
+			     ecoalesce->rx_coalesce_usecs);
 	axienet_update_coalesce_rx(lp, cr, ~XAXIDMA_CR_RUNSTOP_MASK);
 
-	cr = axienet_calc_cr(lp, lp->coalesce_count_tx, lp->coalesce_usec_tx);
+	cr = axienet_calc_cr(lp, ecoalesce->tx_max_coalesced_frames,
+			     ecoalesce->tx_coalesce_usecs);
 	axienet_update_coalesce_tx(lp, cr, ~XAXIDMA_CR_RUNSTOP_MASK);
 	return 0;
 }
@@ -2946,14 +2974,10 @@ static int axienet_probe(struct platform_device *pdev)
 
 	spin_lock_init(&lp->rx_cr_lock);
 	spin_lock_init(&lp->tx_cr_lock);
-	lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
-	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
-	lp->coalesce_usec_rx = XAXIDMA_DFT_RX_USEC;
-	lp->coalesce_usec_tx = XAXIDMA_DFT_TX_USEC;
-	lp->rx_dma_cr = axienet_calc_cr(lp, lp->coalesce_count_rx,
-					lp->coalesce_usec_rx);
-	lp->tx_dma_cr = axienet_calc_cr(lp, lp->coalesce_count_tx,
-					lp->coalesce_usec_tx);
+	lp->rx_dma_cr = axienet_calc_cr(lp, XAXIDMA_DFT_RX_THRESHOLD,
+					XAXIDMA_DFT_RX_USEC);
+	lp->tx_dma_cr = axienet_calc_cr(lp, XAXIDMA_DFT_TX_THRESHOLD,
+					XAXIDMA_DFT_TX_USEC);
 
 	ret = axienet_mdio_setup(lp);
 	if (ret)
-- 
2.35.1.1320.gc452695387.dirty


  parent reply	other threads:[~2025-01-16 23:30 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-16 23:29 [PATCH net-next v4 0/6] net: xilinx: axienet: Enable adaptive IRQ coalescing with DIM Sean Anderson
2025-01-16 23:29 ` [PATCH net-next v4 1/6] net: xilinx: axienet: Add some symbolic constants for IRQ delay timer Sean Anderson
2025-01-16 23:29 ` [PATCH net-next v4 2/6] net: xilinx: axienet: Report an error for bad coalesce settings Sean Anderson
2025-01-16 23:29 ` [PATCH net-next v4 3/6] net: xilinx: axienet: Combine CR calculation Sean Anderson
2025-01-16 23:29 ` [PATCH net-next v4 4/6] net: xilinx: axienet: Support adjusting coalesce settings while running Sean Anderson
2025-01-16 23:29 ` Sean Anderson [this message]
2025-01-19  1:18   ` [PATCH net-next v4 5/6] net: xilinx: axienet: Get coalesce parameters from driver state Jakub Kicinski
2025-01-16 23:29 ` [PATCH net-next v4 6/6] net: xilinx: axienet: Enable adaptive IRQ coalescing with DIM Sean Anderson
2025-01-19  1:19 ` [PATCH net-next v4 0/6] " Jakub Kicinski
2025-01-21 15:59   ` Sean Anderson
2025-01-19  1:50 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250116232954.2696930-6-sean.anderson@linux.dev \
    --to=sean.anderson@linux.dev \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@amd.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=radhey.shyam.pandey@amd.com \
    --cc=shannon.nelson@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).