netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joey Lu <a0987203069@gmail.com>
To: andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
	kuba@kernel.org, pabeni@redhat.com, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org,
	mcoquelin.stm32@gmail.com, richardcochran@gmail.com
Cc: alexandre.torgue@foss.st.com, joabreu@synopsys.com,
	ychuang3@nuvoton.com, schung@nuvoton.com, yclu4@nuvoton.com,
	peppe.cavallaro@st.com, linux-arm-kernel@lists.infradead.org,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Joey Lu <a0987203069@gmail.com>
Subject: [PATCH net-next v8 2/3] arm64: dts: nuvoton: Add Ethernet nodes
Date: Mon,  3 Feb 2025 13:41:59 +0800	[thread overview]
Message-ID: <20250203054200.21977-3-a0987203069@gmail.com> (raw)
In-Reply-To: <20250203054200.21977-1-a0987203069@gmail.com>

Add GMAC nodes for our MA35D1 development boards:
two RGMII interfaces for SOM board, and one RGMII
and one RMII interface for IoT board.

Signed-off-by: Joey Lu <a0987203069@gmail.com>
---
 .../boot/dts/nuvoton/ma35d1-iot-512m.dts      | 12 +++++
 .../boot/dts/nuvoton/ma35d1-som-256m.dts      | 10 ++++
 arch/arm64/boot/dts/nuvoton/ma35d1.dtsi       | 54 +++++++++++++++++++
 3 files changed, 76 insertions(+)

diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
index 9482bec1aa57..5cc712ae92d8 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
@@ -18,6 +18,8 @@ aliases {
 		serial12 = &uart12;
 		serial13 = &uart13;
 		serial14 = &uart14;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
 	};
 
 	chosen {
@@ -126,3 +128,13 @@ &uart14 {
 	pinctrl-0 = <&pinctrl_uart14>;
 	status = "okay";
 };
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gmac1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
index f6f20a17e501..1d9ac350a1f1 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -18,6 +18,8 @@ aliases {
 		serial12 = &uart12;
 		serial14 = &uart14;
 		serial16 = &uart16;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
 	};
 
 	chosen {
@@ -129,3 +131,11 @@ &uart16 {
 	pinctrl-0 = <&pinctrl_uart16>;
 	status = "okay";
 };
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
index e51b98f5bdce..89712e262ee6 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -379,5 +379,59 @@ uart16: serial@40880000 {
 			clocks = <&clk UART16_GATE>;
 			status = "disabled";
 		};
+
+		gmac0: ethernet@40120000 {
+			compatible = "nuvoton,ma35d1-dwmac";
+			reg = <0x0 0x40120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clk EMAC0_GATE>, <&clk EPLL_DIV8>;
+			clock-names = "stmmaceth", "ptp_ref";
+
+			nuvoton,sys = <&sys 0>;
+			resets = <&sys MA35D1_RESET_GMAC0>;
+			reset-names = "stmmaceth";
+
+			phy-mode = "rgmii-id";
+			phy-handle = <&eth_phy0>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eth_phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+		};
+
+		gmac1: ethernet@40130000 {
+			compatible = "nuvoton,ma35d1-dwmac";
+			reg = <0x0 0x40130000 0x0 0x10000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clk EMAC1_GATE>, <&clk EPLL_DIV8>;
+			clock-names = "stmmaceth", "ptp_ref";
+
+			nuvoton,sys = <&sys 1>;
+			resets = <&sys MA35D1_RESET_GMAC1>;
+			reset-names = "stmmaceth";
+
+			phy-mode = "rgmii-id";
+			phy-handle = <&eth_phy1>;
+			status = "disabled";
+
+			mdio1: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eth_phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
 	};
 };
-- 
2.34.1


  parent reply	other threads:[~2025-02-03  5:43 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-03  5:41 [PATCH net-next v8 0/3] Add support for Nuvoton MA35D1 GMAC Joey Lu
2025-02-03  5:41 ` [PATCH net-next v8 1/3] dt-bindings: net: nuvoton: Add schema for Nuvoton MA35 family GMAC Joey Lu
2025-02-03  5:41 ` Joey Lu [this message]
2025-02-03  5:42 ` [PATCH net-next v8 3/3] net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family Joey Lu
2025-02-03 22:06 ` [PATCH net-next v8 0/3] Add support for Nuvoton MA35D1 GMAC Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250203054200.21977-3-a0987203069@gmail.com \
    --to=a0987203069@gmail.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=joabreu@synopsys.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=openbmc@lists.ozlabs.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    --cc=richardcochran@gmail.com \
    --cc=robh@kernel.org \
    --cc=schung@nuvoton.com \
    --cc=ychuang3@nuvoton.com \
    --cc=yclu4@nuvoton.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).