From: <alucerop@amd.com>
To: <linux-cxl@vger.kernel.org>, <netdev@vger.kernel.org>,
<dan.j.williams@intel.com>, <edward.cree@amd.com>,
<davem@davemloft.net>, <kuba@kernel.org>, <pabeni@redhat.com>,
<edumazet@google.com>, <dave.jiang@intel.com>
Cc: Alejandro Lucero <alucerop@amd.com>
Subject: [PATCH v10 01/26] cxl: make memdev creation type agnostic
Date: Wed, 5 Feb 2025 15:19:25 +0000 [thread overview]
Message-ID: <20250205151950.25268-2-alucerop@amd.com> (raw)
In-Reply-To: <20250205151950.25268-1-alucerop@amd.com>
From: Alejandro Lucero <alucerop@amd.com>
In preparation for Type2 support, change memdev creation making
type based on argument.
Integrate initialization of dvsec and serial fields in the related
cxl_dev_state within same function creating the memdev.
Move the code from mbox file to memdev file.
Add new header files with type2 required definitions for memdev
state creation.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
---
drivers/cxl/core/mbox.c | 20 --------------------
drivers/cxl/core/memdev.c | 23 +++++++++++++++++++++++
drivers/cxl/cxlmem.h | 18 +++---------------
drivers/cxl/cxlpci.h | 17 +----------------
drivers/cxl/pci.c | 16 +++++++++-------
include/cxl/cxl.h | 26 ++++++++++++++++++++++++++
include/cxl/pci.h | 23 +++++++++++++++++++++++
7 files changed, 85 insertions(+), 58 deletions(-)
create mode 100644 include/cxl/cxl.h
create mode 100644 include/cxl/pci.h
diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index 4d22bb731177..96155b8af535 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -1435,26 +1435,6 @@ int cxl_mailbox_init(struct cxl_mailbox *cxl_mbox, struct device *host)
}
EXPORT_SYMBOL_NS_GPL(cxl_mailbox_init, "CXL");
-struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev)
-{
- struct cxl_memdev_state *mds;
-
- mds = devm_kzalloc(dev, sizeof(*mds), GFP_KERNEL);
- if (!mds) {
- dev_err(dev, "No memory available\n");
- return ERR_PTR(-ENOMEM);
- }
-
- mutex_init(&mds->event.log_lock);
- mds->cxlds.dev = dev;
- mds->cxlds.reg_map.host = dev;
- mds->cxlds.reg_map.resource = CXL_RESOURCE_NONE;
- mds->cxlds.type = CXL_DEVTYPE_CLASSMEM;
-
- return mds;
-}
-EXPORT_SYMBOL_NS_GPL(cxl_memdev_state_create, "CXL");
-
void __init cxl_mbox_init(void)
{
struct dentry *mbox_debugfs;
diff --git a/drivers/cxl/core/memdev.c b/drivers/cxl/core/memdev.c
index 63c6c681125d..456d505f1bc8 100644
--- a/drivers/cxl/core/memdev.c
+++ b/drivers/cxl/core/memdev.c
@@ -632,6 +632,29 @@ static void detach_memdev(struct work_struct *work)
static struct lock_class_key cxl_memdev_key;
+struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev, u64 serial,
+ u16 dvsec, enum cxl_devtype type)
+{
+ struct cxl_memdev_state *mds;
+
+ mds = devm_kzalloc(dev, sizeof(*mds), GFP_KERNEL);
+ if (!mds) {
+ dev_err(dev, "No memory available\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ mutex_init(&mds->event.log_lock);
+ mds->cxlds.dev = dev;
+ mds->cxlds.reg_map.host = dev;
+ mds->cxlds.reg_map.resource = CXL_RESOURCE_NONE;
+ mds->cxlds.cxl_dvsec = dvsec;
+ mds->cxlds.serial = serial;
+ mds->cxlds.type = type;
+
+ return mds;
+}
+EXPORT_SYMBOL_NS_GPL(cxl_memdev_state_create, "CXL");
+
static struct cxl_memdev *cxl_memdev_alloc(struct cxl_dev_state *cxlds,
const struct file_operations *fops)
{
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 536cbe521d16..62a459078ec3 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -7,6 +7,7 @@
#include <linux/cdev.h>
#include <linux/uuid.h>
#include <linux/node.h>
+#include <cxl/cxl.h>
#include <cxl/event.h>
#include <cxl/mailbox.h>
#include "cxl.h"
@@ -393,20 +394,6 @@ struct cxl_security_state {
struct kernfs_node *sanitize_node;
};
-/*
- * enum cxl_devtype - delineate type-2 from a generic type-3 device
- * @CXL_DEVTYPE_DEVMEM - Vendor specific CXL Type-2 device implementing HDM-D or
- * HDM-DB, no requirement that this device implements a
- * mailbox, or other memory-device-standard manageability
- * flows.
- * @CXL_DEVTYPE_CLASSMEM - Common class definition of a CXL Type-3 device with
- * HDM-H and class-mandatory memory device registers
- */
-enum cxl_devtype {
- CXL_DEVTYPE_DEVMEM,
- CXL_DEVTYPE_CLASSMEM,
-};
-
/**
* struct cxl_dpa_perf - DPA performance property entry
* @dpa_range: range for DPA address
@@ -856,7 +843,8 @@ int cxl_dev_state_identify(struct cxl_memdev_state *mds);
int cxl_await_media_ready(struct cxl_dev_state *cxlds);
int cxl_enumerate_cmds(struct cxl_memdev_state *mds);
int cxl_mem_dpa_fetch(struct cxl_memdev_state *mds, struct cxl_dpa_info *info);
-struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev);
+struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev, u64 serial,
+ u16 dvsec, enum cxl_devtype type);
void set_exclusive_cxl_commands(struct cxl_memdev_state *mds,
unsigned long *cmds);
void clear_exclusive_cxl_commands(struct cxl_memdev_state *mds,
diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h
index 54e219b0049e..9fcf5387e388 100644
--- a/drivers/cxl/cxlpci.h
+++ b/drivers/cxl/cxlpci.h
@@ -3,6 +3,7 @@
#ifndef __CXL_PCI_H__
#define __CXL_PCI_H__
#include <linux/pci.h>
+#include <cxl/pci.h>
#include "cxl.h"
#define CXL_MEMORY_PROGIF 0x10
@@ -14,22 +15,6 @@
*/
#define PCI_DVSEC_HEADER1_LENGTH_MASK GENMASK(31, 20)
-/* CXL 2.0 8.1.3: PCIe DVSEC for CXL Device */
-#define CXL_DVSEC_PCIE_DEVICE 0
-#define CXL_DVSEC_CAP_OFFSET 0xA
-#define CXL_DVSEC_MEM_CAPABLE BIT(2)
-#define CXL_DVSEC_HDM_COUNT_MASK GENMASK(5, 4)
-#define CXL_DVSEC_CTRL_OFFSET 0xC
-#define CXL_DVSEC_MEM_ENABLE BIT(2)
-#define CXL_DVSEC_RANGE_SIZE_HIGH(i) (0x18 + (i * 0x10))
-#define CXL_DVSEC_RANGE_SIZE_LOW(i) (0x1C + (i * 0x10))
-#define CXL_DVSEC_MEM_INFO_VALID BIT(0)
-#define CXL_DVSEC_MEM_ACTIVE BIT(1)
-#define CXL_DVSEC_MEM_SIZE_LOW_MASK GENMASK(31, 28)
-#define CXL_DVSEC_RANGE_BASE_HIGH(i) (0x20 + (i * 0x10))
-#define CXL_DVSEC_RANGE_BASE_LOW(i) (0x24 + (i * 0x10))
-#define CXL_DVSEC_MEM_BASE_LOW_MASK GENMASK(31, 28)
-
#define CXL_DVSEC_RANGE_MAX 2
/* CXL 2.0 8.1.4: Non-CXL Function Map DVSEC */
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index b2c943a4de0a..bd69dc07f387 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -911,6 +911,7 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
int rc, pmu_count;
unsigned int i;
bool irq_avail;
+ u16 dvsec;
/*
* Double check the anonymous union trickery in struct cxl_regs
@@ -924,19 +925,20 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return rc;
pci_set_master(pdev);
- mds = cxl_memdev_state_create(&pdev->dev);
+ dvsec = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_CXL,
+ CXL_DVSEC_PCIE_DEVICE);
+ if (!dvsec)
+ dev_warn(&pdev->dev,
+ "Device DVSEC not present, skip CXL.mem init\n");
+
+ mds = cxl_memdev_state_create(&pdev->dev, pci_get_dsn(pdev), dvsec,
+ CXL_DEVTYPE_CLASSMEM);
if (IS_ERR(mds))
return PTR_ERR(mds);
cxlds = &mds->cxlds;
pci_set_drvdata(pdev, cxlds);
cxlds->rcd = is_cxl_restricted(pdev);
- cxlds->serial = pci_get_dsn(pdev);
- cxlds->cxl_dvsec = pci_find_dvsec_capability(
- pdev, PCI_VENDOR_ID_CXL, CXL_DVSEC_PCIE_DEVICE);
- if (!cxlds->cxl_dvsec)
- dev_warn(&pdev->dev,
- "Device DVSEC not present, skip CXL.mem init\n");
rc = cxl_pci_setup_regs(pdev, CXL_REGLOC_RBI_MEMDEV, &map);
if (rc)
diff --git a/include/cxl/cxl.h b/include/cxl/cxl.h
new file mode 100644
index 000000000000..722782b868ac
--- /dev/null
+++ b/include/cxl/cxl.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2025 Advanced Micro Devices, Inc. */
+
+#ifndef __CXL_H
+#define __CXL_H
+
+#include <linux/types.h>
+/*
+ * enum cxl_devtype - delineate type-2 from a generic type-3 device
+ * @CXL_DEVTYPE_DEVMEM - Vendor specific CXL Type-2 device implementing HDM-D or
+ * HDM-DB, no requirement that this device implements a
+ * mailbox, or other memory-device-standard manageability
+ * flows.
+ * @CXL_DEVTYPE_CLASSMEM - Common class definition of a CXL Type-3 device with
+ * HDM-H and class-mandatory memory device registers
+ */
+enum cxl_devtype {
+ CXL_DEVTYPE_DEVMEM,
+ CXL_DEVTYPE_CLASSMEM,
+};
+
+struct device;
+struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev, u64 serial,
+ u16 dvsec, enum cxl_devtype type);
+
+#endif
diff --git a/include/cxl/pci.h b/include/cxl/pci.h
new file mode 100644
index 000000000000..ad63560caa2c
--- /dev/null
+++ b/include/cxl/pci.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
+
+#ifndef __CXL_ACCEL_PCI_H
+#define __CXL_ACCEL_PCI_H
+
+/* CXL 2.0 8.1.3: PCIe DVSEC for CXL Device */
+#define CXL_DVSEC_PCIE_DEVICE 0
+#define CXL_DVSEC_CAP_OFFSET 0xA
+#define CXL_DVSEC_MEM_CAPABLE BIT(2)
+#define CXL_DVSEC_HDM_COUNT_MASK GENMASK(5, 4)
+#define CXL_DVSEC_CTRL_OFFSET 0xC
+#define CXL_DVSEC_MEM_ENABLE BIT(2)
+#define CXL_DVSEC_RANGE_SIZE_HIGH(i) (0x18 + ((i) * 0x10))
+#define CXL_DVSEC_RANGE_SIZE_LOW(i) (0x1C + ((i) * 0x10))
+#define CXL_DVSEC_MEM_INFO_VALID BIT(0)
+#define CXL_DVSEC_MEM_ACTIVE BIT(1)
+#define CXL_DVSEC_MEM_SIZE_LOW_MASK GENMASK(31, 28)
+#define CXL_DVSEC_RANGE_BASE_HIGH(i) (0x20 + ((i) * 0x10))
+#define CXL_DVSEC_RANGE_BASE_LOW(i) (0x24 + ((i) * 0x10))
+#define CXL_DVSEC_MEM_BASE_LOW_MASK GENMASK(31, 28)
+
+#endif
--
2.17.1
next prev parent reply other threads:[~2025-02-05 15:20 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-05 15:19 [PATCH v10 00/26] cxl: add type2 device basic support alucerop
2025-02-05 15:19 ` alucerop [this message]
2025-02-06 19:37 ` [PATCH v10 01/26] cxl: make memdev creation type agnostic Dan Williams
2025-02-17 12:32 ` Alejandro Lucero Palau
2025-02-19 2:29 ` Dan Williams
2025-02-20 18:17 ` Alejandro Lucero Palau
2025-02-17 13:05 ` Alejandro Lucero Palau
2025-02-13 3:57 ` Alison Schofield
2025-02-17 12:49 ` Alejandro Lucero Palau
2025-02-17 13:06 ` Alejandro Lucero Palau
2025-02-14 17:02 ` Jonathan Cameron
2025-02-17 13:08 ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 02/26] sfc: add basic cxl initialization alucerop
2025-02-06 1:37 ` Edward Cree
2025-02-07 12:48 ` Simon Horman
2025-02-17 13:10 ` Alejandro Lucero Palau
2025-02-07 13:03 ` Simon Horman
2025-02-17 13:11 ` Alejandro Lucero Palau
2025-02-18 13:32 ` Simon Horman
2025-02-05 15:19 ` [PATCH v10 03/26] cxl: move pci generic code alucerop
2025-02-05 21:33 ` Ira Weiny
2025-02-06 17:49 ` Alejandro Lucero Palau
2025-02-14 17:11 ` Jonathan Cameron
2025-02-17 13:13 ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 04/26] cxl: move register/capability check to driver alucerop
2025-02-07 12:52 ` Simon Horman
2025-02-17 13:17 ` Alejandro Lucero Palau
2025-02-14 17:21 ` Jonathan Cameron
2025-02-17 13:18 ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 05/26] cxl: add function for type2 cxl regs setup alucerop
2025-02-05 21:35 ` Ira Weiny
2025-02-06 17:50 ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 06/26] sfc: use cxl api for regs setup and checking alucerop
2025-02-05 21:31 ` Ira Weiny
2025-02-06 17:47 ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 07/26] cxl: add support for setting media ready by an accel driver alucerop
2025-02-05 21:42 ` Ira Weiny
2025-02-06 17:58 ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 08/26] sfc: set cxl media ready alucerop
2025-02-05 15:19 ` [PATCH v10 09/26] cxl: support device identification without mailbox alucerop
2025-02-05 21:45 ` Ira Weiny
2025-02-06 18:10 ` Alejandro Lucero Palau
2025-02-06 19:23 ` Ira Weiny
2025-02-17 13:41 ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 10/26] cxl: modify dpa setup process for supporting type2 alucerop
2025-02-05 15:19 ` [PATCH v10 11/26] sfc: initialize dpa resources alucerop
2025-02-05 15:19 ` [PATCH v10 12/26] cxl: prepare memdev creation for type2 alucerop
2025-02-05 15:19 ` [PATCH v10 13/26] sfc: create type2 cxl memdev alucerop
2025-02-05 15:19 ` [PATCH v10 14/26] cxl: define a driver interface for HPA free space enumeration alucerop
2025-02-07 12:55 ` Simon Horman
2025-02-17 13:44 ` Alejandro Lucero Palau
2025-02-13 4:08 ` Alison Schofield
2025-02-17 13:49 ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 15/26] sfc: obtain root decoder with enough HPA free space alucerop
2025-02-05 22:47 ` Ira Weiny
2025-02-17 13:54 ` Alejandro Lucero Palau
2025-02-18 0:03 ` Ira Weiny
2025-02-05 15:19 ` [PATCH v10 16/26] cxl: define a driver interface for DPA allocation alucerop
2025-02-06 19:11 ` kernel test robot
2025-02-07 13:46 ` Simon Horman
2025-02-17 14:08 ` Alejandro Lucero Palau
2025-02-18 13:34 ` Simon Horman
2025-02-18 14:09 ` Simon Horman
2025-02-05 15:19 ` [PATCH v10 17/26] sfc: get endpoint decoder alucerop
2025-02-05 15:19 ` [PATCH v10 18/26] cxl: make region type based on endpoint type alucerop
2025-02-05 15:19 ` [PATCH v10 19/26] cxl/region: factor out interleave ways setup alucerop
2025-02-05 15:19 ` [PATCH v10 20/26] cxl/region: factor out interleave granularity setup alucerop
2025-02-05 15:19 ` [PATCH v10 21/26] cxl: allow region creation by type2 drivers alucerop
2025-02-06 20:06 ` kernel test robot
2025-02-07 13:23 ` Simon Horman
2025-02-05 15:19 ` [PATCH v10 22/26] cxl: add region flag for precluding a device memory to be used for dax alucerop
2025-02-05 15:19 ` [PATCH v10 23/26] sfc: create cxl region alucerop
2025-02-05 15:19 ` [PATCH v10 24/26] cxl: add function for obtaining region range alucerop
2025-02-05 15:19 ` [PATCH v10 25/26] sfc: update MCDI protocol headers alucerop
2025-02-05 15:19 ` [PATCH v10 26/26] sfc: support pio mapping based on cxl alucerop
2025-02-13 1:51 ` [PATCH v10 00/26] cxl: add type2 device basic support Alison Schofield
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250205151950.25268-2-alucerop@amd.com \
--to=alucerop@amd.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=edward.cree@amd.com \
--cc=kuba@kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).