Re: [PATCH net-next v2 2/3] net: dsa: allow use of phylink managed EEE support

[Vladimir Oltean <olteanv@gmail.com>]

On Fri, Feb 07, 2025 at 01:09:38PM +0000, Russell King (Oracle) wrote:
> In order to allow DSA drivers to use phylink managed EEE, changes are
> necessary to the DSA .set_eee() and .get_eee() methods. Where drivers
> make use of phylink managed EEE, these should just pass the method on
> to their phylink implementation without calling the DSA specific
> operations.
> 
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> ---
>  net/dsa/user.c | 21 +++++++++++++--------
>  1 file changed, 13 insertions(+), 8 deletions(-)
> 
> diff --git a/net/dsa/user.c b/net/dsa/user.c
> index 291ab1b4acc4..2e0a51c1b750 100644
> --- a/net/dsa/user.c
> +++ b/net/dsa/user.c
> @@ -1243,16 +1243,21 @@ static int dsa_user_set_eee(struct net_device *dev, struct ethtool_keee *e)
>  	if (!ds->ops->support_eee || !ds->ops->support_eee(ds, dp->index))
>  		return -EOPNOTSUPP;
>  
> -	/* Port's PHY and MAC both need to be EEE capable */
> -	if (!dev->phydev)
> -		return -ENODEV;
> +	/* If the port is using phylink managed EEE, then get_mac_eee is
> +	 * unnecessary.

You thanked me for spotting that this should have been set_mac_eee() in
the comment, but you didn't update it.
https://lore.kernel.org/netdev/Z4bC77mwoeypDAdH@shell.armlinux.org.uk/

> +	 */
> +	if (!phylink_mac_implements_lpi(ds->phylink_mac_ops)) {
> +		/* Port's PHY and MAC both need to be EEE capable */
> +		if (!dev->phydev)
> +			return -ENODEV;
>  
> -	if (!ds->ops->set_mac_eee)
> -		return -EOPNOTSUPP;
> +		if (!ds->ops->set_mac_eee)
> +			return -EOPNOTSUPP;
>  
> -	ret = ds->ops->set_mac_eee(ds, dp->index, e);
> -	if (ret)
> -		return ret;
> +		ret = ds->ops->set_mac_eee(ds, dp->index, e);
> +		if (ret)
> +			return ret;
> +	}
>  
>  	return phylink_ethtool_set_eee(dp->pl, e);
>  }
> -- 
> 2.30.2
>