[net PATCH] net: phy: qcom: qca807x fix condition for DAC_DSP_BIAS_CURRENT

[Christian Marangi <ansuelsmth@gmail.com>]

From: George Moussalem <george.moussalem@outlook.com>

While setting the DAC value, the wrong boolean value is evaluated to set
the DSP bias current. So let's correct the conditional statement and use
the right boolean value read from the DTS set in the priv.

Cc: stable@vger.kernel.org
Fixes: d1cb613efbd3 ("net: phy: qcom: add support for QCA807x PHY Family")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/net/phy/qcom/qca807x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c
index 3279de857b47..2ad8c2586d64 100644
--- a/drivers/net/phy/qcom/qca807x.c
+++ b/drivers/net/phy/qcom/qca807x.c
@@ -774,7 +774,7 @@ static int qca807x_config_init(struct phy_device *phydev)
 	control_dac &= ~QCA807X_CONTROL_DAC_MASK;
 	if (!priv->dac_full_amplitude)
 		control_dac |= QCA807X_CONTROL_DAC_DSP_AMPLITUDE;
-	if (!priv->dac_full_amplitude)
+	if (!priv->dac_full_bias_current)
 		control_dac |= QCA807X_CONTROL_DAC_DSP_BIAS_CURRENT;
 	if (!priv->dac_disable_bias_current_tweak)
 		control_dac |= QCA807X_CONTROL_DAC_BIAS_CURRENT_TWEAK;
-- 
2.47.1