netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eric Biggers <ebiggers@kernel.org>
To: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH v3 04/19] crypto: scatterwalk - add new functions for copying data
Date: Wed, 19 Feb 2025 10:23:26 -0800	[thread overview]
Message-ID: <20250219182341.43961-5-ebiggers@kernel.org> (raw)
In-Reply-To: <20250219182341.43961-1-ebiggers@kernel.org>

From: Eric Biggers <ebiggers@google.com>

Add memcpy_from_sglist() and memcpy_to_sglist() which are more readable
versions of scatterwalk_map_and_copy() with the 'out' argument 0 and 1
respectively.  They follow the same argument order as memcpy_from_page()
and memcpy_to_page() from <linux/highmem.h>.  Note that in the case of
memcpy_from_sglist(), this also happens to be the same argument order
that scatterwalk_map_and_copy() uses.

The new code is also faster, mainly because it builds the scatter_walk
directly without creating a temporary scatterlist.  E.g., a 20%
performance improvement is seen for copying the AES-GCM auth tag.

Make scatterwalk_map_and_copy() be a wrapper around memcpy_from_sglist()
and memcpy_to_sglist().  Callers of scatterwalk_map_and_copy() should be
updated to call memcpy_from_sglist() or memcpy_to_sglist() directly, but
there are a lot of them so they aren't all being updated right away.

Also add functions memcpy_from_scatterwalk() and memcpy_to_scatterwalk()
which are similar but operate on a scatter_walk instead of a
scatterlist.  These will replace scatterwalk_copychunks() with the 'out'
argument 0 and 1 respectively.  Their behavior differs slightly from
scatterwalk_copychunks() in that they automatically take care of
flushing the dcache when needed, making them easier to use.

scatterwalk_copychunks() itself is left unchanged for now.  It will be
removed after its callers are updated to use other functions instead.

Signed-off-by: Eric Biggers <ebiggers@google.com>
---
 crypto/scatterwalk.c         | 59 ++++++++++++++++++++++++++++++------
 include/crypto/scatterwalk.h | 24 +++++++++++++--
 2 files changed, 72 insertions(+), 11 deletions(-)

diff --git a/crypto/scatterwalk.c b/crypto/scatterwalk.c
index af436ad02e3ff..2e7a532152d61 100644
--- a/crypto/scatterwalk.c
+++ b/crypto/scatterwalk.c
@@ -65,26 +65,67 @@ void scatterwalk_copychunks(void *buf, struct scatter_walk *walk,
 		scatterwalk_pagedone(walk, out & 1, 1);
 	}
 }
 EXPORT_SYMBOL_GPL(scatterwalk_copychunks);
 
-void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg,
-			      unsigned int start, unsigned int nbytes, int out)
+inline void memcpy_from_scatterwalk(void *buf, struct scatter_walk *walk,
+				    unsigned int nbytes)
+{
+	do {
+		const void *src_addr;
+		unsigned int to_copy;
+
+		src_addr = scatterwalk_next(walk, nbytes, &to_copy);
+		memcpy(buf, src_addr, to_copy);
+		scatterwalk_done_src(walk, src_addr, to_copy);
+		buf += to_copy;
+		nbytes -= to_copy;
+	} while (nbytes);
+}
+EXPORT_SYMBOL_GPL(memcpy_from_scatterwalk);
+
+inline void memcpy_to_scatterwalk(struct scatter_walk *walk, const void *buf,
+				  unsigned int nbytes)
+{
+	do {
+		void *dst_addr;
+		unsigned int to_copy;
+
+		dst_addr = scatterwalk_next(walk, nbytes, &to_copy);
+		memcpy(dst_addr, buf, to_copy);
+		scatterwalk_done_dst(walk, dst_addr, to_copy);
+		buf += to_copy;
+		nbytes -= to_copy;
+	} while (nbytes);
+}
+EXPORT_SYMBOL_GPL(memcpy_to_scatterwalk);
+
+void memcpy_from_sglist(void *buf, struct scatterlist *sg,
+			unsigned int start, unsigned int nbytes)
 {
 	struct scatter_walk walk;
-	struct scatterlist tmp[2];
 
-	if (!nbytes)
+	if (unlikely(nbytes == 0)) /* in case sg == NULL */
 		return;
 
-	sg = scatterwalk_ffwd(tmp, sg, start);
+	scatterwalk_start_at_pos(&walk, sg, start);
+	memcpy_from_scatterwalk(buf, &walk, nbytes);
+}
+EXPORT_SYMBOL_GPL(memcpy_from_sglist);
+
+void memcpy_to_sglist(struct scatterlist *sg, unsigned int start,
+		      const void *buf, unsigned int nbytes)
+{
+	struct scatter_walk walk;
+
+	if (unlikely(nbytes == 0)) /* in case sg == NULL */
+		return;
 
-	scatterwalk_start(&walk, sg);
-	scatterwalk_copychunks(buf, &walk, nbytes, out);
-	scatterwalk_done(&walk, out, 0);
+	scatterwalk_start_at_pos(&walk, sg, start);
+	memcpy_to_scatterwalk(&walk, buf, nbytes);
 }
-EXPORT_SYMBOL_GPL(scatterwalk_map_and_copy);
+EXPORT_SYMBOL_GPL(memcpy_to_sglist);
 
 struct scatterlist *scatterwalk_ffwd(struct scatterlist dst[2],
 				     struct scatterlist *src,
 				     unsigned int len)
 {
diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h
index 8e83c43016c9d..1689ecd7ddafa 100644
--- a/include/crypto/scatterwalk.h
+++ b/include/crypto/scatterwalk.h
@@ -168,12 +168,32 @@ static inline void scatterwalk_done_dst(struct scatter_walk *walk,
 void scatterwalk_skip(struct scatter_walk *walk, unsigned int nbytes);
 
 void scatterwalk_copychunks(void *buf, struct scatter_walk *walk,
 			    size_t nbytes, int out);
 
-void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg,
-			      unsigned int start, unsigned int nbytes, int out);
+void memcpy_from_scatterwalk(void *buf, struct scatter_walk *walk,
+			     unsigned int nbytes);
+
+void memcpy_to_scatterwalk(struct scatter_walk *walk, const void *buf,
+			   unsigned int nbytes);
+
+void memcpy_from_sglist(void *buf, struct scatterlist *sg,
+			unsigned int start, unsigned int nbytes);
+
+void memcpy_to_sglist(struct scatterlist *sg, unsigned int start,
+		      const void *buf, unsigned int nbytes);
+
+/* In new code, please use memcpy_{from,to}_sglist() directly instead. */
+static inline void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg,
+					    unsigned int start,
+					    unsigned int nbytes, int out)
+{
+	if (out)
+		memcpy_to_sglist(sg, start, buf, nbytes);
+	else
+		memcpy_from_sglist(buf, sg, start, nbytes);
+}
 
 struct scatterlist *scatterwalk_ffwd(struct scatterlist dst[2],
 				     struct scatterlist *src,
 				     unsigned int len);
 
-- 
2.48.1


  parent reply	other threads:[~2025-02-19 18:24 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-19 18:23 [PATCH v3 00/19] crypto: scatterlist handling improvements Eric Biggers
2025-02-19 18:23 ` [PATCH v3 01/19] crypto: scatterwalk - move to next sg entry just in time Eric Biggers
2025-02-19 18:23 ` [PATCH v3 02/19] crypto: scatterwalk - add new functions for skipping data Eric Biggers
2025-02-19 18:23 ` [PATCH v3 03/19] crypto: scatterwalk - add new functions for iterating through data Eric Biggers
2025-03-02  6:28   ` Herbert Xu
2025-03-02 20:21     ` Eric Biggers
2025-03-03  2:35       ` Herbert Xu
2025-02-19 18:23 ` Eric Biggers [this message]
2025-03-02  6:40   ` [PATCH v3 04/19] crypto: scatterwalk - add new functions for copying data Herbert Xu
2025-03-02 21:37     ` Eric Biggers
2025-03-03  2:39       ` Herbert Xu
2025-02-19 18:23 ` [PATCH v3 05/19] crypto: scatterwalk - add scatterwalk_get_sglist() Eric Biggers
2025-02-19 18:23 ` [PATCH v3 06/19] crypto: skcipher - use scatterwalk_start_at_pos() Eric Biggers
2025-02-19 18:23 ` [PATCH v3 07/19] crypto: aegis - use the new scatterwalk functions Eric Biggers
2025-02-19 18:23 ` [PATCH v3 08/19] crypto: arm/ghash " Eric Biggers
2025-02-19 18:23 ` [PATCH v3 09/19] crypto: arm64 " Eric Biggers
2025-02-19 18:23 ` [PATCH v3 10/19] crypto: nx " Eric Biggers
2025-02-19 18:23 ` [PATCH v3 11/19] crypto: s390/aes-gcm " Eric Biggers
2025-02-19 18:23 ` [PATCH v3 12/19] crypto: s5p-sss " Eric Biggers
2025-02-19 18:23 ` [PATCH v3 13/19] crypto: stm32 " Eric Biggers
2025-02-19 18:23 ` [PATCH v3 14/19] crypto: x86/aes-gcm " Eric Biggers
2025-02-19 18:23 ` [PATCH v3 15/19] crypto: x86/aegis " Eric Biggers
2025-02-19 18:23 ` [PATCH v3 16/19] net/tls: " Eric Biggers
2025-02-19 18:23 ` [PATCH v3 17/19] crypto: skcipher - " Eric Biggers
2025-02-19 18:23 ` [PATCH v3 18/19] crypto: scatterwalk - remove obsolete functions Eric Biggers
2025-02-19 18:23 ` [PATCH v3 19/19] crypto: scatterwalk - don't split at page boundaries when !HIGHMEM Eric Biggers
2025-03-02  8:11 ` [PATCH v3 00/19] crypto: scatterlist handling improvements Herbert Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250219182341.43961-5-ebiggers@kernel.org \
    --to=ebiggers@kernel.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).