From: Eric Woudstra <ericwouds@gmail.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
Pablo Neira Ayuso <pablo@netfilter.org>,
Jozsef Kadlecsik <kadlec@netfilter.org>,
Jiri Pirko <jiri@resnulli.us>, Ivan Vecera <ivecera@redhat.com>,
Roopa Prabhu <roopa@nvidia.com>,
Nikolay Aleksandrov <razor@blackwall.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Kuniyuki Iwashima <kuniyu@amazon.com>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
Joe Damato <jdamato@fastly.com>,
Alexander Lobakin <aleksander.lobakin@intel.com>,
Vladimir Oltean <olteanv@gmail.com>,
"Frank Wunderlich" <frank-w@public-files.de>,
Daniel Golle <daniel@makrotopia.org>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
netfilter-devel@vger.kernel.org, coreteam@netfilter.org,
bridge@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
Eric Woudstra <ericwouds@gmail.com>
Subject: [PATCH v7 net-next 12/14] bridge: No DEV_PATH_BR_VLAN_UNTAG_HW for dsa foreign
Date: Tue, 25 Feb 2025 21:16:14 +0100 [thread overview]
Message-ID: <20250225201616.21114-13-ericwouds@gmail.com> (raw)
In-Reply-To: <20250225201616.21114-1-ericwouds@gmail.com>
In network setup as below:
fastpath bypass
.----------------------------------------.
/ \
| IP - forwarding |
| / \ v
| / wan ...
| /
| |
| |
| brlan.1
| |
| +-------------------------------+
| | vlan 1 |
| | |
| | brlan (vlan-filtering) |
| | +---------------+
| | | DSA-SWITCH |
| | vlan 1 | |
| | to | |
| | untagged 1 vlan 1 |
| +---------------+---------------+
. / \
----->wlan1 lan0
. .
. ^
^ vlan 1 tagged packets
untagged packets
br_vlan_fill_forward_path_mode() sets DEV_PATH_BR_VLAN_UNTAG_HW when
filling in from brlan.1 towards wlan1. But it should be set to
DEV_PATH_BR_VLAN_UNTAG in this case. Using BR_VLFLAG_ADDED_BY_SWITCHDEV
is not correct. The dsa switchdev adds it as a foreign port.
The same problem for all foreignly added dsa vlans on the bridge.
First add the vlan, trying only native devices.
If this fails, we know this may be a vlan from a foreign device.
Use BR_VLFLAG_TAGGING_BY_SWITCHDEV to make sure DEV_PATH_BR_VLAN_UNTAG_HW
is set only when there if no foreign device involved.
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
---
include/net/switchdev.h | 1 +
net/bridge/br_private.h | 10 ++++++++++
net/bridge/br_switchdev.c | 15 +++++++++++++++
net/bridge/br_vlan.c | 7 ++++++-
net/switchdev/switchdev.c | 2 +-
5 files changed, 33 insertions(+), 2 deletions(-)
diff --git a/include/net/switchdev.h b/include/net/switchdev.h
index 8346b0d29542..ee500706496b 100644
--- a/include/net/switchdev.h
+++ b/include/net/switchdev.h
@@ -15,6 +15,7 @@
#define SWITCHDEV_F_NO_RECURSE BIT(0)
#define SWITCHDEV_F_SKIP_EOPNOTSUPP BIT(1)
#define SWITCHDEV_F_DEFER BIT(2)
+#define SWITCHDEV_F_NO_FOREIGN BIT(3)
enum switchdev_attr_id {
SWITCHDEV_ATTR_ID_UNDEFINED,
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index a0b950390a16..b950db453d8d 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -180,6 +180,7 @@ enum {
BR_VLFLAG_MCAST_ENABLED = BIT(2),
BR_VLFLAG_GLOBAL_MCAST_ENABLED = BIT(3),
BR_VLFLAG_NEIGH_SUPPRESS_ENABLED = BIT(4),
+ BR_VLFLAG_TAGGING_BY_SWITCHDEV = BIT(5),
};
/**
@@ -2184,6 +2185,8 @@ void br_switchdev_mdb_notify(struct net_device *dev,
int type);
int br_switchdev_port_vlan_add(struct net_device *dev, u16 vid, u16 flags,
bool changed, struct netlink_ext_ack *extack);
+int br_switchdev_port_vlan_no_foreign_add(struct net_device *dev, u16 vid, u16 flags,
+ bool changed, struct netlink_ext_ack *extack);
int br_switchdev_port_vlan_del(struct net_device *dev, u16 vid);
void br_switchdev_init(struct net_bridge *br);
@@ -2267,6 +2270,13 @@ static inline int br_switchdev_port_vlan_add(struct net_device *dev, u16 vid,
return -EOPNOTSUPP;
}
+static inline int br_switchdev_port_vlan_no_foreign_add(struct net_device *dev, u16 vid,
+ u16 flags, bool changed,
+ struct netlink_ext_ack *extack)
+{
+ return -EOPNOTSUPP;
+}
+
static inline int br_switchdev_port_vlan_del(struct net_device *dev, u16 vid)
{
return -EOPNOTSUPP;
diff --git a/net/bridge/br_switchdev.c b/net/bridge/br_switchdev.c
index 7b41ee8740cb..efa7a055b8f9 100644
--- a/net/bridge/br_switchdev.c
+++ b/net/bridge/br_switchdev.c
@@ -187,6 +187,21 @@ int br_switchdev_port_vlan_add(struct net_device *dev, u16 vid, u16 flags,
return switchdev_port_obj_add(dev, &v.obj, extack);
}
+int br_switchdev_port_vlan_no_foreign_add(struct net_device *dev, u16 vid, u16 flags,
+ bool changed, struct netlink_ext_ack *extack)
+{
+ struct switchdev_obj_port_vlan v = {
+ .obj.orig_dev = dev,
+ .obj.id = SWITCHDEV_OBJ_ID_PORT_VLAN,
+ .obj.flags = SWITCHDEV_F_NO_FOREIGN,
+ .flags = flags,
+ .vid = vid,
+ .changed = changed,
+ };
+
+ return switchdev_port_obj_add(dev, &v.obj, extack);
+}
+
int br_switchdev_port_vlan_del(struct net_device *dev, u16 vid)
{
struct switchdev_obj_port_vlan v = {
diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c
index a18c7da12ebd..aea94d401a30 100644
--- a/net/bridge/br_vlan.c
+++ b/net/bridge/br_vlan.c
@@ -109,6 +109,11 @@ static int __vlan_vid_add(struct net_device *dev, struct net_bridge *br,
/* Try switchdev op first. In case it is not supported, fallback to
* 8021q add.
*/
+ err = br_switchdev_port_vlan_no_foreign_add(dev, v->vid, flags, false, extack);
+ if (err != -EOPNOTSUPP) {
+ v->priv_flags |= BR_VLFLAG_ADDED_BY_SWITCHDEV | BR_VLFLAG_TAGGING_BY_SWITCHDEV;
+ return err;
+ }
err = br_switchdev_port_vlan_add(dev, v->vid, flags, false, extack);
if (err == -EOPNOTSUPP)
return vlan_vid_add(dev, br->vlan_proto, v->vid);
@@ -1491,7 +1496,7 @@ int br_vlan_fill_forward_path_mode(struct net_bridge *br,
if (path->bridge.vlan_mode == DEV_PATH_BR_VLAN_TAG)
path->bridge.vlan_mode = DEV_PATH_BR_VLAN_KEEP;
- else if (v->priv_flags & BR_VLFLAG_ADDED_BY_SWITCHDEV)
+ else if (v->priv_flags & BR_VLFLAG_TAGGING_BY_SWITCHDEV)
path->bridge.vlan_mode = DEV_PATH_BR_VLAN_UNTAG_HW;
else
path->bridge.vlan_mode = DEV_PATH_BR_VLAN_UNTAG;
diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c
index 6488ead9e464..c48f66643e99 100644
--- a/net/switchdev/switchdev.c
+++ b/net/switchdev/switchdev.c
@@ -749,7 +749,7 @@ static int __switchdev_handle_port_obj_add(struct net_device *dev,
/* Event is neither on a bridge nor a LAG. Check whether it is on an
* interface that is in a bridge with us.
*/
- if (!foreign_dev_check_cb)
+ if (!foreign_dev_check_cb || port_obj_info->obj->flags & SWITCHDEV_F_NO_FOREIGN)
return err;
br = netdev_master_upper_dev_get(dev);
--
2.47.1
next prev parent reply other threads:[~2025-02-25 20:16 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-25 20:16 [PATCH v7 net-next 00/14] bridge-fastpath and related improvements Eric Woudstra
2025-02-25 20:16 ` [PATCH v7 net-next 01/14] netfilter: nf_flow_table_offload: Add nf_flow_encap_push() for xmit direct Eric Woudstra
2025-02-25 20:16 ` [PATCH v7 net-next 02/14] netfilter: flow: remove hw_outdev, out.hw_ifindex and out.hw_ifidx Eric Woudstra
2025-02-25 20:16 ` [PATCH v7 net-next 03/14] netfilter: bridge: Add conntrack double vlan and pppoe Eric Woudstra
2025-02-28 2:09 ` Jakub Kicinski
2025-02-25 20:16 ` [PATCH v7 net-next 04/14] netfilter: nft_chain_filter: Add bridge " Eric Woudstra
2025-02-25 20:16 ` [PATCH v7 net-next 05/14] bridge: Add filling forward path from port to port Eric Woudstra
2025-02-25 20:16 ` [PATCH v7 net-next 06/14] net: core: dev: Add dev_fill_bridge_path() Eric Woudstra
2025-02-25 20:16 ` [PATCH v7 net-next 07/14] netfilter :nf_flow_table_offload: Add nf_flow_rule_bridge() Eric Woudstra
2025-02-25 20:16 ` [PATCH v7 net-next 08/14] netfilter: nf_flow_table_inet: Add nf_flowtable_type flowtable_bridge Eric Woudstra
2025-02-25 20:16 ` [PATCH v7 net-next 09/14] netfilter: nft_flow_offload: Add NFPROTO_BRIDGE to validate Eric Woudstra
2025-02-25 20:16 ` [PATCH v7 net-next 10/14] netfilter: nft_flow_offload: Add DEV_PATH_MTK_WDMA to nft_dev_path_info() Eric Woudstra
2025-02-25 20:16 ` [PATCH v7 net-next 11/14] netfilter: nft_flow_offload: No ingress_vlan forward info for dsa user port Eric Woudstra
2025-02-25 20:16 ` Eric Woudstra [this message]
2025-02-25 20:16 ` [PATCH v7 net-next 13/14] bridge: Introduce DEV_PATH_BR_VLAN_KEEP_HW for bridge-fastpath Eric Woudstra
2025-02-25 20:16 ` [PATCH v7 net-next 14/14] netfilter: nft_flow_offload: Add bridgeflow to nft_flow_offload_eval() Eric Woudstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250225201616.21114-13-ericwouds@gmail.com \
--to=ericwouds@gmail.com \
--cc=aleksander.lobakin@intel.com \
--cc=andrew+netdev@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bigeasy@linutronix.de \
--cc=bridge@lists.linux.dev \
--cc=coreteam@netfilter.org \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=frank-w@public-files.de \
--cc=horms@kernel.org \
--cc=ivecera@redhat.com \
--cc=jdamato@fastly.com \
--cc=jiri@resnulli.us \
--cc=kadlec@netfilter.org \
--cc=kuba@kernel.org \
--cc=kuniyu@amazon.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=netfilter-devel@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=pablo@netfilter.org \
--cc=razor@blackwall.org \
--cc=roopa@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).