Netdev List
 help / color / mirror / Atom feed
From: Choong Yong Liang <yong.liang.choong@linux.intel.com>
To: "Simon Horman" <horms@kernel.org>,
	"Jose Abreu" <joabreu@synopsys.com>,
	"Jose Abreu" <Jose.Abreu@synopsys.com>,
	"David E Box" <david.e.box@linux.intel.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Ingo Molnar" <mingo@redhat.com>,
	"Borislav Petkov" <bp@alien8.de>,
	"Dave Hansen" <dave.hansen@linux.intel.com>,
	"H . Peter Anvin" <hpa@zytor.com>,
	"Rajneesh Bhardwaj" <irenic.rajneesh@gmail.com>,
	"David E Box" <david.e.box@intel.com>,
	"Andrew Lunn" <andrew+netdev@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	"Eric Dumazet" <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
	"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
	"Jiawen Wu" <jiawenwu@trustnetic.com>,
	"Mengyuan Lou" <mengyuanlou@net-swift.com>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	"Russell King" <linux@armlinux.org.uk>,
	"Hans de Goede" <hdegoede@redhat.com>,
	"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
	"Richard Cochran" <richardcochran@gmail.com>,
	"Serge Semin" <fancer.lancer@gmail.com>
Cc: x86@kernel.org, linux-kernel@vger.kernel.org,
	netdev@vger.kernel.org, platform-driver-x86@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next v9 5/6] net: stmmac: configure SerDes according to the interface mode
Date: Thu, 27 Feb 2025 20:15:21 +0800	[thread overview]
Message-ID: <20250227121522.1802832-6-yong.liang.choong@linux.intel.com> (raw)
In-Reply-To: <20250227121522.1802832-1-yong.liang.choong@linux.intel.com>

Intel platform will configure the SerDes through PMC API based on the
provided interface mode.

This patch adds several new functions below:-
- intel_tsn_lane_is_available(): This new function reads FIA lane
  ownership registers and common lane registers through IPC commands
  to know which lane the mGbE port is assigned to.
- intel_mac_finish(): To configure the SerDes based on the assigned
  lane and latest interface mode, it sends IPC command to the PMC through
  PMC driver/API. The PMC acts as a proxy for R/W on behalf of the driver.
- intel_set_reg_access(): Set the register access to the available TSN
  interface.

Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |   1 +
 .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 179 +++++++++++++++++-
 .../net/ethernet/stmicro/stmmac/dwmac-intel.h |  29 +++
 3 files changed, 204 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 4cc85a36a1ab..c5f94a67b3f2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -307,6 +307,7 @@ config DWMAC_INTEL
 	default X86
 	depends on X86 && STMMAC_ETH && PCI
 	depends on COMMON_CLK
+	depends on ACPI
 	help
 	  This selects the Intel platform specific bus support for the
 	  stmmac driver. This driver is used for Intel Quark/EHL/TGL.
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 48acba5eb178..f73a48f98581 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -5,15 +5,30 @@
 #include <linux/clk-provider.h>
 #include <linux/pci.h>
 #include <linux/dmi.h>
+#include <linux/platform_data/x86/intel_pmc_ipc.h>
 #include "dwmac-intel.h"
 #include "dwmac4.h"
 #include "stmmac.h"
 #include "stmmac_ptp.h"
 
+struct pmc_serdes_regs {
+	u8 index;
+	u32 val;
+};
+
+struct pmc_serdes_reg_info {
+	const struct pmc_serdes_regs *regs;
+	u8 num_regs;
+};
+
 struct intel_priv_data {
 	int mdio_adhoc_addr;	/* mdio address for serdes & etc */
 	unsigned long crossts_adj;
 	bool is_pse;
+	const int *tsn_lane_regs;
+	int max_tsn_lane_regs;
+	struct pmc_serdes_reg_info pid_1g;
+	struct pmc_serdes_reg_info pid_2p5g;
 };
 
 /* This struct is used to associate PCI Function of MAC controller on a board,
@@ -35,6 +50,44 @@ struct stmmac_pci_info {
 	int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
 };
 
+static const struct pmc_serdes_regs pid_modphy3_1g_regs[] = {
+	{ PID_MODPHY3_B_MODPHY_PCR_LCPLL_DWORD0,	B_MODPHY_PCR_LCPLL_DWORD0_1G },
+	{ PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD2,	N_MODPHY_PCR_LCPLL_DWORD2_1G },
+	{ PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD7,	N_MODPHY_PCR_LCPLL_DWORD7_1G },
+	{ PID_MODPHY3_N_MODPHY_PCR_LPPLL_DWORD10,	N_MODPHY_PCR_LPPLL_DWORD10_1G },
+	{ PID_MODPHY3_N_MODPHY_PCR_CMN_ANA_DWORD30,	N_MODPHY_PCR_CMN_ANA_DWORD30_1G },
+	{}
+};
+
+static const struct pmc_serdes_regs pid_modphy3_2p5g_regs[] = {
+	{ PID_MODPHY3_B_MODPHY_PCR_LCPLL_DWORD0,	B_MODPHY_PCR_LCPLL_DWORD0_2P5G },
+	{ PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD2,	N_MODPHY_PCR_LCPLL_DWORD2_2P5G },
+	{ PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD7,	N_MODPHY_PCR_LCPLL_DWORD7_2P5G },
+	{ PID_MODPHY3_N_MODPHY_PCR_LPPLL_DWORD10,	N_MODPHY_PCR_LPPLL_DWORD10_2P5G },
+	{ PID_MODPHY3_N_MODPHY_PCR_CMN_ANA_DWORD30,	N_MODPHY_PCR_CMN_ANA_DWORD30_2P5G },
+	{}
+};
+
+static const struct pmc_serdes_regs pid_modphy1_1g_regs[] = {
+	{ PID_MODPHY1_B_MODPHY_PCR_LCPLL_DWORD0,	B_MODPHY_PCR_LCPLL_DWORD0_1G },
+	{ PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD2,	N_MODPHY_PCR_LCPLL_DWORD2_1G },
+	{ PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD7,	N_MODPHY_PCR_LCPLL_DWORD7_1G },
+	{ PID_MODPHY1_N_MODPHY_PCR_LPPLL_DWORD10,	N_MODPHY_PCR_LPPLL_DWORD10_1G },
+	{ PID_MODPHY1_N_MODPHY_PCR_CMN_ANA_DWORD30,	N_MODPHY_PCR_CMN_ANA_DWORD30_1G },
+	{}
+};
+
+static const struct pmc_serdes_regs pid_modphy1_2p5g_regs[] = {
+	{ PID_MODPHY1_B_MODPHY_PCR_LCPLL_DWORD0,	B_MODPHY_PCR_LCPLL_DWORD0_2P5G },
+	{ PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD2,	N_MODPHY_PCR_LCPLL_DWORD2_2P5G },
+	{ PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD7,	N_MODPHY_PCR_LCPLL_DWORD7_2P5G },
+	{ PID_MODPHY1_N_MODPHY_PCR_LPPLL_DWORD10,	N_MODPHY_PCR_LPPLL_DWORD10_2P5G },
+	{ PID_MODPHY1_N_MODPHY_PCR_CMN_ANA_DWORD30,	N_MODPHY_PCR_CMN_ANA_DWORD30_2P5G },
+	{}
+};
+
+static const int ehl_tsn_lane_regs[] = {7, 8, 9, 10, 11};
+
 static int stmmac_pci_find_phy_addr(struct pci_dev *pdev,
 				    const struct dmi_system_id *dmi_list)
 {
@@ -93,7 +146,7 @@ static int intel_serdes_powerup(struct net_device *ndev, void *priv_data)
 	data &= ~SERDES_RATE_MASK;
 	data &= ~SERDES_PCLK_MASK;
 
-	if (priv->plat->max_speed == 2500)
+	if (priv->plat->phy_interface == PHY_INTERFACE_MODE_2500BASEX)
 		data |= SERDES_RATE_PCIE_GEN2 << SERDES_RATE_PCIE_SHIFT |
 			SERDES_PCLK_37p5MHZ << SERDES_PCLK_SHIFT;
 	else
@@ -415,6 +468,95 @@ static void intel_mgbe_pse_crossts_adj(struct intel_priv_data *intel_priv,
 	}
 }
 
+static int intel_tsn_lane_is_available(struct net_device *ndev,
+				       struct intel_priv_data *intel_priv)
+{
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	struct pmc_ipc_cmd tmp = {};
+	struct pmc_ipc_rbuf rbuf = {};
+	int ret = 0, i, j;
+	const int max_fia_regs = 5;
+
+	tmp.cmd = IPC_SOC_REGISTER_ACCESS;
+	tmp.sub_cmd = IPC_SOC_SUB_CMD_READ;
+
+	for (i = 0; i < max_fia_regs; i++) {
+		tmp.wbuf[0] = R_PCH_FIA_15_PCR_LOS1_REG_BASE + i;
+
+		ret = intel_pmc_ipc(&tmp, &rbuf);
+		if (ret < 0) {
+			netdev_info(priv->dev, "Failed to read from PMC.\n");
+			return ret;
+		}
+
+		for (j = 0; j <= intel_priv->max_tsn_lane_regs; j++)
+			if ((rbuf.buf[0] >>
+				(4 * (intel_priv->tsn_lane_regs[j] % 8)) &
+					B_PCH_FIA_PCR_L0O) == 0xB)
+				return ret;
+	}
+
+	return ret;
+}
+
+static int intel_set_reg_access(const struct pmc_serdes_regs *regs, int max_regs)
+{
+	int ret = 0, i;
+
+	for (i = 0; i < max_regs; i++) {
+		struct pmc_ipc_cmd tmp = {};
+		struct pmc_ipc_rbuf rbuf = {};
+
+		tmp.cmd = IPC_SOC_REGISTER_ACCESS;
+		tmp.sub_cmd = IPC_SOC_SUB_CMD_WRITE;
+		tmp.wbuf[0] = (u32)regs[i].index;
+		tmp.wbuf[1] = regs[i].val;
+
+		ret = intel_pmc_ipc(&tmp, &rbuf);
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret;
+}
+
+static int intel_mac_finish(struct net_device *ndev,
+			    void *intel_data,
+			    unsigned int mode,
+			    phy_interface_t interface)
+{
+	struct intel_priv_data *intel_priv = intel_data;
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	const struct pmc_serdes_regs *regs;
+	int max_regs = 0;
+	int ret = 0;
+
+	ret = intel_tsn_lane_is_available(ndev, intel_priv);
+	if (ret < 0) {
+		netdev_info(priv->dev, "No TSN lane available to set the registers.\n");
+		return ret;
+	}
+
+	if (interface == PHY_INTERFACE_MODE_2500BASEX) {
+		regs = intel_priv->pid_2p5g.regs;
+		max_regs = intel_priv->pid_2p5g.num_regs;
+	} else {
+		regs = intel_priv->pid_1g.regs;
+		max_regs = intel_priv->pid_1g.num_regs;
+	}
+
+	ret = intel_set_reg_access(regs, max_regs);
+	if (ret < 0)
+		return ret;
+
+	priv->plat->phy_interface = interface;
+
+	intel_serdes_powerdown(ndev, intel_priv);
+	intel_serdes_powerup(ndev, intel_priv);
+
+	return ret;
+}
+
 static void common_default_data(struct plat_stmmacenet_data *plat)
 {
 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
@@ -624,6 +766,8 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
 static int ehl_common_data(struct pci_dev *pdev,
 			   struct plat_stmmacenet_data *plat)
 {
+	struct intel_priv_data *intel_priv = plat->bsp_priv;
+
 	plat->rx_queues_to_use = 8;
 	plat->tx_queues_to_use = 8;
 	plat->flags |= STMMAC_FLAG_USE_PHY_WOL;
@@ -639,20 +783,29 @@ static int ehl_common_data(struct pci_dev *pdev,
 	plat->safety_feat_cfg->prtyen = 0;
 	plat->safety_feat_cfg->tmouten = 0;
 
+	intel_priv->tsn_lane_regs = ehl_tsn_lane_regs;
+	intel_priv->max_tsn_lane_regs = ARRAY_SIZE(ehl_tsn_lane_regs);
+
 	return intel_mgbe_common_data(pdev, plat);
 }
 
 static int ehl_sgmii_data(struct pci_dev *pdev,
 			  struct plat_stmmacenet_data *plat)
 {
+	struct intel_priv_data *intel_priv = plat->bsp_priv;
+
 	plat->bus_id = 1;
 	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
-	plat->speed_mode_2500 = intel_speed_mode_2500;
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
-
+	plat->mac_finish = intel_mac_finish;
 	plat->clk_ptp_rate = 204800000;
 
+	intel_priv->pid_1g.regs = pid_modphy3_1g_regs;
+	intel_priv->pid_1g.num_regs = ARRAY_SIZE(pid_modphy3_1g_regs);
+	intel_priv->pid_2p5g.regs = pid_modphy3_2p5g_regs;
+	intel_priv->pid_2p5g.num_regs = ARRAY_SIZE(pid_modphy3_2p5g_regs);
+
 	return ehl_common_data(pdev, plat);
 }
 
@@ -705,10 +858,18 @@ static struct stmmac_pci_info ehl_pse0_rgmii1g_info = {
 static int ehl_pse0_sgmii1g_data(struct pci_dev *pdev,
 				 struct plat_stmmacenet_data *plat)
 {
+	struct intel_priv_data *intel_priv = plat->bsp_priv;
+
 	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
-	plat->speed_mode_2500 = intel_speed_mode_2500;
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
+	plat->mac_finish = intel_mac_finish;
+
+	intel_priv->pid_1g.regs = pid_modphy1_1g_regs;
+	intel_priv->pid_1g.num_regs = ARRAY_SIZE(pid_modphy1_1g_regs);
+	intel_priv->pid_2p5g.regs = pid_modphy1_2p5g_regs;
+	intel_priv->pid_2p5g.num_regs = ARRAY_SIZE(pid_modphy1_2p5g_regs);
+
 	return ehl_pse0_common_data(pdev, plat);
 }
 
@@ -746,10 +907,18 @@ static struct stmmac_pci_info ehl_pse1_rgmii1g_info = {
 static int ehl_pse1_sgmii1g_data(struct pci_dev *pdev,
 				 struct plat_stmmacenet_data *plat)
 {
+	struct intel_priv_data *intel_priv = plat->bsp_priv;
+
 	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
-	plat->speed_mode_2500 = intel_speed_mode_2500;
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
+	plat->mac_finish = intel_mac_finish;
+
+	intel_priv->pid_1g.regs = pid_modphy1_1g_regs;
+	intel_priv->pid_1g.num_regs = ARRAY_SIZE(pid_modphy1_1g_regs);
+	intel_priv->pid_2p5g.regs = pid_modphy1_2p5g_regs;
+	intel_priv->pid_2p5g.num_regs = ARRAY_SIZE(pid_modphy1_2p5g_regs);
+
 	return ehl_pse1_common_data(pdev, plat);
 }
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
index 0a37987478c1..a12f8e65f89f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
@@ -50,4 +50,33 @@
 #define PCH_PTP_CLK_FREQ_19_2MHZ	(GMAC_GPO0)
 #define PCH_PTP_CLK_FREQ_200MHZ		(0)
 
+/* Modphy Register index */
+#define R_PCH_FIA_15_PCR_LOS1_REG_BASE			8
+#define R_PCH_FIA_15_PCR_LOS2_REG_BASE			9
+#define R_PCH_FIA_15_PCR_LOS3_REG_BASE			10
+#define R_PCH_FIA_15_PCR_LOS4_REG_BASE			11
+#define R_PCH_FIA_15_PCR_LOS5_REG_BASE			12
+#define B_PCH_FIA_PCR_L0O				GENMASK(3, 0)
+#define PID_MODPHY1_B_MODPHY_PCR_LCPLL_DWORD0		13
+#define PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD2		14
+#define PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD7		15
+#define PID_MODPHY1_N_MODPHY_PCR_LPPLL_DWORD10		16
+#define PID_MODPHY1_N_MODPHY_PCR_CMN_ANA_DWORD30	17
+#define PID_MODPHY3_B_MODPHY_PCR_LCPLL_DWORD0		18
+#define PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD2		19
+#define PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD7		20
+#define PID_MODPHY3_N_MODPHY_PCR_LPPLL_DWORD10		21
+#define PID_MODPHY3_N_MODPHY_PCR_CMN_ANA_DWORD30	22
+
+#define B_MODPHY_PCR_LCPLL_DWORD0_1G		0x46AAAA41
+#define N_MODPHY_PCR_LCPLL_DWORD2_1G		0x00000139
+#define N_MODPHY_PCR_LCPLL_DWORD7_1G		0x002A0003
+#define N_MODPHY_PCR_LPPLL_DWORD10_1G		0x00170008
+#define N_MODPHY_PCR_CMN_ANA_DWORD30_1G		0x0000D4AC
+#define B_MODPHY_PCR_LCPLL_DWORD0_2P5G		0x58555551
+#define N_MODPHY_PCR_LCPLL_DWORD2_2P5G		0x0000012D
+#define N_MODPHY_PCR_LCPLL_DWORD7_2P5G		0x001F0003
+#define N_MODPHY_PCR_LPPLL_DWORD10_2P5G		0x00170008
+#define N_MODPHY_PCR_CMN_ANA_DWORD30_2P5G	0x8200ACAC
+
 #endif /* __DWMAC_INTEL_H__ */
-- 
2.34.1


  parent reply	other threads:[~2025-02-27 12:17 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-27 12:15 [PATCH net-next v9 0/6] Enable SGMII and 2500BASEX interface mode switching for Intel platforms Choong Yong Liang
2025-02-27 12:15 ` [PATCH net-next v9 1/6] net: phylink: use pl->link_interface in phylink_expects_phy() Choong Yong Liang
2025-02-27 12:15 ` [PATCH net-next v9 2/6] net: pcs: xpcs: re-initiate clause 37 Auto-negotiation Choong Yong Liang
2025-02-27 12:15 ` [PATCH net-next v9 3/6] arch: x86: add IPC mailbox accessor function and add SoC register access Choong Yong Liang
2025-03-04  9:54   ` Paolo Abeni
2025-03-04 13:05     ` Ilpo Järvinen
2025-02-27 12:15 ` [PATCH net-next v9 4/6] net: stmmac: configure SerDes on mac_finish Choong Yong Liang
2025-02-27 12:15 ` Choong Yong Liang [this message]
2025-03-06  7:15   ` [PATCH net-next v9 5/6] net: stmmac: configure SerDes according to the interface mode Andy Shevchenko
2025-03-06  8:39     ` Choong Yong Liang
2025-03-06  9:05       ` Andy Shevchenko
2025-03-06 12:56         ` Choong Yong Liang
2025-03-06 20:52           ` David E. Box
2025-03-07  5:28             ` Choong Yong Liang
2025-03-07 18:06               ` Andy Shevchenko
2025-02-27 12:15 ` [PATCH net-next v9 6/6] net: stmmac: interface switching support for ADL-N platform Choong Yong Liang
2025-03-06  3:20 ` [PATCH net-next v9 0/6] Enable SGMII and 2500BASEX interface mode switching for Intel platforms patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250227121522.1802832-6-yong.liang.choong@linux.intel.com \
    --to=yong.liang.choong@linux.intel.com \
    --cc=Jose.Abreu@synopsys.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=davem@davemloft.net \
    --cc=david.e.box@intel.com \
    --cc=david.e.box@linux.intel.com \
    --cc=edumazet@google.com \
    --cc=fancer.lancer@gmail.com \
    --cc=hdegoede@redhat.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=hpa@zytor.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=irenic.rajneesh@gmail.com \
    --cc=jiawenwu@trustnetic.com \
    --cc=joabreu@synopsys.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux@armlinux.org.uk \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mengyuanlou@net-swift.com \
    --cc=mingo@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox