[PATCH net-next v2 0/9] eth: bnxt: maintain basic pkt/byte counters in SW

[Jakub Kicinski <kuba@kernel.org>]

Some workloads want to be able to track bandwidth utilization on
the scale of 10s of msecs. bnxt uses HW stats and async stats
updates, with update frequency controlled via ethtool -C.
Updating all HW stats more often than 100 msec is both hard for
the device and consumes PCIe bandwidth. Switch to maintaining
basic Rx / Tx packet and byte counters in SW.

Tested with drivers/net/stats.py:
  # Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0

Manually tested by comparing the ethtool -S stats (which continues
to show HW stats) with qstats, and total interface stats.
With and without HW-GRO, and with XDP on / off.
Stopping and starting the interface also doesn't corrupt the values.

v2:
 - fix skipping XDP vs the XDP Tx ring handling (Michael)
 - rename the defines as well as the structs (Przemek)
 - fix counding frag'ed packets in XDP Tx
v1: https://lore.kernel.org/20250226211003.2790916-1-kuba@kernel.org

Jakub Kicinski (9):
  eth: bnxt: use napi_consume_skb()
  eth: bnxt: don't run xdp programs on fallback traffic
  eth: bnxt: rename ring_err_stats -> ring_drv_stats
  eth: bnxt: snapshot driver stats
  eth: bnxt: don't use ifdef to check for CONFIG_INET in GRO
  eth: bnxt: consolidate the GRO-but-not-really paths in bnxt_gro_skb()
  eth: bnxt: maintain rx pkt/byte stats in SW
  eth: bnxt: maintain tx pkt/byte stats in SW
  eth: bnxt: count xdp xmit packets

 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |  49 +++-
 drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.h |   3 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     | 213 +++++++++++-------
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c |  20 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c |  43 +++-
 5 files changed, 228 insertions(+), 100 deletions(-)

-- 
2.48.1