Re: [PATCH net-next 1/3] net: stmmac: call phylink_start() and phylink_stop() in XDP functions

[Jakub Kicinski <kuba@kernel.org>]

On Sat, 12 Apr 2025 10:34:42 +0100 Russell King (Oracle) wrote:
> Phylink does not permit drivers to mess with the netif carrier, as
> this will de-synchronise phylink with the MAC driver. Moreover,
> setting and clearing the TE and RE bits via stmmac_mac_set() in this
> path is also wrong as the link may not be up.
> 
> Replace the netif_carrier_on(), netif_carrier_off() and
> stmmac_mac_set() calls with the appropriate phylink_start() and
> phylink_stop() calls, thereby allowing phylink to manage the netif
> carrier and TE/RE bits through the .mac_link_up() and .mac_link_down()
> methods.
> 
> Note that RE should only be set after the DMA is ready to avoid the
> receive FIFO between the MAC and DMA blocks overflowing, so
> phylink_start() needs to be placed after DMA has been started.

IIUC this will case a link loss when XDP is installed, if not disregard
the reset of the email.

Any idea why it's necessary to mess with the link for XDP changes?
Is there no way to discard all the traffic and let the queues go
idle without dropping the link?

I think we should mention in the commit message that the side effect is
link loss on XDP on / off. I don't know of any other driver which would
need this, stmmac is a real gift..