[PATCH net-next v3 0/2] Implement udp tunnel port for txgbe

[PATCH net-next v3 0/2] Implement udp tunnel port for txgbe

[Jiawen Wu]

Setting UDP tunnel port is supported on TXGBE devices, to implement
hardware offload for various tunnel packets.

v3:
 - Link to v2: https://lore.kernel.org/all/20250414091022.383328-1-jiawenwu@trustnetic.com/
 - Use .sync_table to simplify the flow
 - Remove SLEEP flag and add OPEN_ONLY flag

v2:
 - Link to v1: https://lore.kernel.org/all/20250410074456.321847-1-jiawenwu@trustnetic.com/
 - Remove pointless checks
 - Adjust definition order

Jiawen Wu (2):
  net: txgbe: Support to set UDP tunnel port
  net: wangxun: restrict feature flags for tunnel packets

 drivers/net/ethernet/wangxun/libwx/wx_lib.c   | 27 +++++++++++++
 drivers/net/ethernet/wangxun/libwx/wx_lib.h   |  3 ++
 drivers/net/ethernet/wangxun/ngbe/ngbe_main.c |  1 +
 .../net/ethernet/wangxun/txgbe/txgbe_main.c   | 39 +++++++++++++++++++
 .../net/ethernet/wangxun/txgbe/txgbe_type.h   |  3 ++
 5 files changed, 73 insertions(+)

-- 
2.27.0

[PATCH net-next v3 1/2] net: txgbe: Support to set UDP tunnel port

[Jiawen Wu]

Tunnel types VXLAN/VXLAN_GPE/GENEVE are supported for txgbe devices. The
hardware supports to set only one port for each tunnel type.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
 .../net/ethernet/wangxun/txgbe/txgbe_main.c   | 38 +++++++++++++++++++
 .../net/ethernet/wangxun/txgbe/txgbe_type.h   |  3 ++
 2 files changed, 41 insertions(+)

diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
index 6d9134a3ce4d..95e5262a1e9c 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
@@ -8,6 +8,7 @@
 #include <linux/string.h>
 #include <linux/etherdevice.h>
 #include <linux/phylink.h>
+#include <net/udp_tunnel.h>
 #include <net/ip.h>
 #include <linux/if_vlan.h>
 
@@ -392,6 +393,8 @@ static int txgbe_open(struct net_device *netdev)
 
 	txgbe_up_complete(wx);
 
+	udp_tunnel_nic_reset_ntf(netdev);
+
 	return 0;
 
 err_free_irq:
@@ -537,6 +540,39 @@ void txgbe_do_reset(struct net_device *netdev)
 		txgbe_reset(wx);
 }
 
+static int txgbe_udp_tunnel_sync(struct net_device *dev, unsigned int table)
+{
+	struct wx *wx = netdev_priv(dev);
+	struct udp_tunnel_info ti;
+
+	udp_tunnel_nic_get_port(dev, table, 0, &ti);
+	switch (ti.type) {
+	case UDP_TUNNEL_TYPE_VXLAN:
+		wr32(wx, TXGBE_CFG_VXLAN, ntohs(ti.port));
+		break;
+	case UDP_TUNNEL_TYPE_VXLAN_GPE:
+		wr32(wx, TXGBE_CFG_VXLAN_GPE, ntohs(ti.port));
+		break;
+	case UDP_TUNNEL_TYPE_GENEVE:
+		wr32(wx, TXGBE_CFG_GENEVE, ntohs(ti.port));
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static const struct udp_tunnel_nic_info txgbe_udp_tunnels = {
+	.sync_table	= txgbe_udp_tunnel_sync,
+	.flags		= UDP_TUNNEL_NIC_INFO_OPEN_ONLY,
+	.tables		= {
+		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_VXLAN, },
+		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_VXLAN_GPE, },
+		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_GENEVE, },
+	},
+};
+
 static const struct net_device_ops txgbe_netdev_ops = {
 	.ndo_open               = txgbe_open,
 	.ndo_stop               = txgbe_close,
@@ -632,6 +668,7 @@ static int txgbe_probe(struct pci_dev *pdev,
 	wx->driver_name = txgbe_driver_name;
 	txgbe_set_ethtool_ops(netdev);
 	netdev->netdev_ops = &txgbe_netdev_ops;
+	netdev->udp_tunnel_nic_info = &txgbe_udp_tunnels;
 
 	/* setup the private structure */
 	err = txgbe_sw_init(wx);
@@ -677,6 +714,7 @@ static int txgbe_probe(struct pci_dev *pdev,
 	netdev->features |= NETIF_F_HIGHDMA;
 	netdev->hw_features |= NETIF_F_GRO;
 	netdev->features |= NETIF_F_GRO;
+	netdev->features |= NETIF_F_RX_UDP_TUNNEL_PORT;
 
 	netdev->priv_flags |= IFF_UNICAST_FLT;
 	netdev->priv_flags |= IFF_SUPP_NOFCS;
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
index 5937cbc6bd05..cb553318641d 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
@@ -88,6 +88,9 @@
 /* Port cfg registers */
 #define TXGBE_CFG_PORT_ST                       0x14404
 #define TXGBE_CFG_PORT_ST_LINK_UP               BIT(0)
+#define TXGBE_CFG_VXLAN                         0x14410
+#define TXGBE_CFG_VXLAN_GPE                     0x14414
+#define TXGBE_CFG_GENEVE                        0x14418
 
 /* I2C registers */
 #define TXGBE_I2C_BASE                          0x14900
-- 
2.27.0

Re: [PATCH net-next v3 1/2] net: txgbe: Support to set UDP tunnel port

[Jakub Kicinski]

On Thu, 17 Apr 2025 16:03:27 +0800 Jiawen Wu wrote:
> @@ -392,6 +393,8 @@ static int txgbe_open(struct net_device *netdev)
                                 ^^^^^^^^^^
>  
>  	txgbe_up_complete(wx);
>  
> +	udp_tunnel_nic_reset_ntf(netdev);
        ^^^^^^^^^^^^^^^^^^^^^^^^
>  	return 0;

> +	.flags		= UDP_TUNNEL_NIC_INFO_OPEN_ONLY,

Documentation says:

        /* Device only supports offloads when it's open, all ports
         * will be removed before close and re-added after open.
         */
        UDP_TUNNEL_NIC_INFO_OPEN_ONLY   = BIT(1),

Are you sure you have to explicitly reset?

RE: [PATCH net-next v3 1/2] net: txgbe: Support to set UDP tunnel port

[Jiawen Wu]

On Fri, Apr 18, 2025 7:58 AM, Jakub Kicinski wrote:
> On Thu, 17 Apr 2025 16:03:27 +0800 Jiawen Wu wrote:
> > @@ -392,6 +393,8 @@ static int txgbe_open(struct net_device *netdev)
>                                  ^^^^^^^^^^
> >
> >  	txgbe_up_complete(wx);
> >
> > +	udp_tunnel_nic_reset_ntf(netdev);
>         ^^^^^^^^^^^^^^^^^^^^^^^^
> >  	return 0;
> 
> > +	.flags		= UDP_TUNNEL_NIC_INFO_OPEN_ONLY,
> 
> Documentation says:
> 
>         /* Device only supports offloads when it's open, all ports
>          * will be removed before close and re-added after open.
>          */
>         UDP_TUNNEL_NIC_INFO_OPEN_ONLY   = BIT(1),
> 
> Are you sure you have to explicitly reset?

Yes. Stop device will reset hardware, which reset UDP port to the default value.
So it has to re-configure the ports.

Re: [PATCH net-next v3 1/2] net: txgbe: Support to set UDP tunnel port

[Jakub Kicinski]

On Fri, 18 Apr 2025 09:44:00 +0800 Jiawen Wu wrote:
> On Fri, Apr 18, 2025 7:58 AM, Jakub Kicinski wrote:
> > On Thu, 17 Apr 2025 16:03:27 +0800 Jiawen Wu wrote:  
> > > @@ -392,6 +393,8 @@ static int txgbe_open(struct net_device *netdev)  
> >                                  ^^^^^^^^^^  
> > >
> > >  	txgbe_up_complete(wx);
> > >
> > > +	udp_tunnel_nic_reset_ntf(netdev);  
> >         ^^^^^^^^^^^^^^^^^^^^^^^^  
> > >  	return 0;  
> >   
> > > +	.flags		= UDP_TUNNEL_NIC_INFO_OPEN_ONLY,  
> > 
> > Documentation says:
> > 
> >         /* Device only supports offloads when it's open, all ports
> >          * will be removed before close and re-added after open.
> >          */
> >         UDP_TUNNEL_NIC_INFO_OPEN_ONLY   = BIT(1),
> > 
> > Are you sure you have to explicitly reset?  
> 
> Yes. Stop device will reset hardware, which reset UDP port to the default value.
> So it has to re-configure the ports.

My point is that this is basically what the
UDP_TUNNEL_NIC_INFO_OPEN_ONLY flag already assumes.
There should be no need to reset if you already told the core 
with the flag that the device forgets everything when closed.

Could you retest without the reset_ntf ?

RE: [PATCH net-next v3 1/2] net: txgbe: Support to set UDP tunnel port

[Jiawen Wu]

On Fri, Apr 18, 2025 10:20 AM, Jakub Kicinski wrote:
> On Fri, 18 Apr 2025 09:44:00 +0800 Jiawen Wu wrote:
> > On Fri, Apr 18, 2025 7:58 AM, Jakub Kicinski wrote:
> > > On Thu, 17 Apr 2025 16:03:27 +0800 Jiawen Wu wrote:
> > > > @@ -392,6 +393,8 @@ static int txgbe_open(struct net_device *netdev)
> > >                                  ^^^^^^^^^^
> > > >
> > > >  	txgbe_up_complete(wx);
> > > >
> > > > +	udp_tunnel_nic_reset_ntf(netdev);
> > >         ^^^^^^^^^^^^^^^^^^^^^^^^
> > > >  	return 0;
> > >
> > > > +	.flags		= UDP_TUNNEL_NIC_INFO_OPEN_ONLY,
> > >
> > > Documentation says:
> > >
> > >         /* Device only supports offloads when it's open, all ports
> > >          * will be removed before close and re-added after open.
> > >          */
> > >         UDP_TUNNEL_NIC_INFO_OPEN_ONLY   = BIT(1),
> > >
> > > Are you sure you have to explicitly reset?
> >
> > Yes. Stop device will reset hardware, which reset UDP port to the default value.
> > So it has to re-configure the ports.
> 
> My point is that this is basically what the
> UDP_TUNNEL_NIC_INFO_OPEN_ONLY flag already assumes.
> There should be no need to reset if you already told the core
> with the flag that the device forgets everything when closed.
> 
> Could you retest without the reset_ntf ?

Thanks for the guidance.
The test result looks the same as before, when I remove reset_ntf.
I'll fix it in patch v4. :)

[PATCH net-next v3 2/2] net: wangxun: restrict feature flags for tunnel packets

[Jiawen Wu]

Implement ndo_features_check to restrict Tx checksum offload flags, since
there are some inner layer length and protocols unsupported.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
---
 drivers/net/ethernet/wangxun/libwx/wx_lib.c   | 27 +++++++++++++++++++
 drivers/net/ethernet/wangxun/libwx/wx_lib.h   |  3 +++
 drivers/net/ethernet/wangxun/ngbe/ngbe_main.c |  1 +
 .../net/ethernet/wangxun/txgbe/txgbe_main.c   |  1 +
 4 files changed, 32 insertions(+)

diff --git a/drivers/net/ethernet/wangxun/libwx/wx_lib.c b/drivers/net/ethernet/wangxun/libwx/wx_lib.c
index 18422b940dbe..2a808afeb414 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_lib.c
+++ b/drivers/net/ethernet/wangxun/libwx/wx_lib.c
@@ -3000,6 +3000,33 @@ netdev_features_t wx_fix_features(struct net_device *netdev,
 }
 EXPORT_SYMBOL(wx_fix_features);
 
+#define WX_MAX_TUNNEL_HDR_LEN	80
+netdev_features_t wx_features_check(struct sk_buff *skb,
+				    struct net_device *netdev,
+				    netdev_features_t features)
+{
+	struct wx *wx = netdev_priv(netdev);
+
+	if (!skb->encapsulation)
+		return features;
+
+	if (wx->mac.type == wx_mac_em)
+		return features & ~NETIF_F_CSUM_MASK;
+
+	if (unlikely(skb_inner_mac_header(skb) - skb_transport_header(skb) >
+		     WX_MAX_TUNNEL_HDR_LEN))
+		return features & ~NETIF_F_CSUM_MASK;
+
+	if (skb->inner_protocol_type == ENCAP_TYPE_ETHER &&
+	    skb->inner_protocol != htons(ETH_P_IP) &&
+	    skb->inner_protocol != htons(ETH_P_IPV6) &&
+	    skb->inner_protocol != htons(ETH_P_TEB))
+		return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
+
+	return features;
+}
+EXPORT_SYMBOL(wx_features_check);
+
 void wx_set_ring(struct wx *wx, u32 new_tx_count,
 		 u32 new_rx_count, struct wx_ring *temp_ring)
 {
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_lib.h b/drivers/net/ethernet/wangxun/libwx/wx_lib.h
index fdeb0c315b75..919f49999308 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_lib.h
+++ b/drivers/net/ethernet/wangxun/libwx/wx_lib.h
@@ -33,6 +33,9 @@ void wx_get_stats64(struct net_device *netdev,
 int wx_set_features(struct net_device *netdev, netdev_features_t features);
 netdev_features_t wx_fix_features(struct net_device *netdev,
 				  netdev_features_t features);
+netdev_features_t wx_features_check(struct sk_buff *skb,
+				    struct net_device *netdev,
+				    netdev_features_t features);
 void wx_set_ring(struct wx *wx, u32 new_tx_count,
 		 u32 new_rx_count, struct wx_ring *temp_ring);
 
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
index fd102078f5c9..82e27b9cfc9c 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
@@ -587,6 +587,7 @@ static const struct net_device_ops ngbe_netdev_ops = {
 	.ndo_set_rx_mode        = wx_set_rx_mode,
 	.ndo_set_features       = wx_set_features,
 	.ndo_fix_features       = wx_fix_features,
+	.ndo_features_check     = wx_features_check,
 	.ndo_validate_addr      = eth_validate_addr,
 	.ndo_set_mac_address    = wx_set_mac,
 	.ndo_get_stats64        = wx_get_stats64,
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
index 95e5262a1e9c..80e6b01c799b 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
@@ -581,6 +581,7 @@ static const struct net_device_ops txgbe_netdev_ops = {
 	.ndo_set_rx_mode        = wx_set_rx_mode,
 	.ndo_set_features       = wx_set_features,
 	.ndo_fix_features       = wx_fix_features,
+	.ndo_features_check     = wx_features_check,
 	.ndo_validate_addr      = eth_validate_addr,
 	.ndo_set_mac_address    = wx_set_mac,
 	.ndo_get_stats64        = wx_get_stats64,
-- 
2.27.0