From: Kuniyuki Iwashima <kuniyu@amazon.com>
To: "David S. Miller" <davem@davemloft.net>,
David Ahern <dsahern@kernel.org>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>,
Kuniyuki Iwashima <kuniyu@amazon.com>,
Kuniyuki Iwashima <kuni1840@gmail.com>, <netdev@vger.kernel.org>
Subject: [PATCH v3 net-next 05/15] ipv6: Move nexthop_find_by_id() after fib6_info_alloc().
Date: Thu, 17 Apr 2025 17:03:46 -0700 [thread overview]
Message-ID: <20250418000443.43734-6-kuniyu@amazon.com> (raw)
In-Reply-To: <20250418000443.43734-1-kuniyu@amazon.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT.
Then, we must perform two lookups for nexthop and dev under RCU
to guarantee their lifetime.
ip6_route_info_create() calls nexthop_find_by_id() first if
RTA_NH_ID is specified, and then allocates struct fib6_info.
nexthop_find_by_id() must be called under RCU, but we do not want
to use GFP_ATOMIC for memory allocation here, which will be likely
to fail in ip6_route_multipath_add().
Let's move nexthop_find_by_id() after the memory allocation so
that we can later split ip6_route_info_create() into two parts:
the sleepable part and the RCU part.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
---
net/ipv6/route.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 5f370c269e64..06c5414fc14e 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -3733,24 +3733,11 @@ static struct fib6_info *ip6_route_info_create(struct fib6_config *cfg,
{
struct net *net = cfg->fc_nlinfo.nl_net;
struct fib6_info *rt = NULL;
- struct nexthop *nh = NULL;
struct fib6_table *table;
struct fib6_nh *fib6_nh;
- int err = -EINVAL;
+ int err = -ENOBUFS;
int addr_type;
- if (cfg->fc_nh_id) {
- nh = nexthop_find_by_id(net, cfg->fc_nh_id);
- if (!nh) {
- NL_SET_ERR_MSG(extack, "Nexthop id does not exist");
- goto out;
- }
- err = fib6_check_nexthop(nh, cfg, extack);
- if (err)
- goto out;
- }
-
- err = -ENOBUFS;
if (cfg->fc_nlinfo.nlh &&
!(cfg->fc_nlinfo.nlh->nlmsg_flags & NLM_F_CREATE)) {
table = fib6_get_table(net, cfg->fc_table);
@@ -3766,7 +3753,7 @@ static struct fib6_info *ip6_route_info_create(struct fib6_config *cfg,
goto out;
err = -ENOMEM;
- rt = fib6_info_alloc(gfp_flags, !nh);
+ rt = fib6_info_alloc(gfp_flags, !cfg->fc_nh_id);
if (!rt)
goto out;
@@ -3802,12 +3789,27 @@ static struct fib6_info *ip6_route_info_create(struct fib6_config *cfg,
ipv6_addr_prefix(&rt->fib6_src.addr, &cfg->fc_src, cfg->fc_src_len);
rt->fib6_src.plen = cfg->fc_src_len;
#endif
- if (nh) {
+
+ if (cfg->fc_nh_id) {
+ struct nexthop *nh;
+
+ nh = nexthop_find_by_id(net, cfg->fc_nh_id);
+ if (!nh) {
+ err = -EINVAL;
+ NL_SET_ERR_MSG(extack, "Nexthop id does not exist");
+ goto out_free;
+ }
+
+ err = fib6_check_nexthop(nh, cfg, extack);
+ if (err)
+ goto out_free;
+
if (!nexthop_get(nh)) {
NL_SET_ERR_MSG(extack, "Nexthop has been deleted");
err = -ENOENT;
goto out_free;
}
+
rt->nh = nh;
fib6_nh = nexthop_fib6_nh(rt->nh);
} else {
--
2.49.0
next prev parent reply other threads:[~2025-04-18 0:08 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-18 0:03 [PATCH v3 net-next 00/15] ipv6: No RTNL for IPv6 routing table Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 01/15] ipv6: Validate RTA_GATEWAY of RTA_MULTIPATH in rtm_to_fib6_config() Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 02/15] ipv6: Get rid of RTNL for SIOCDELRT and RTM_DELROUTE Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 03/15] ipv6: Move some validation from ip6_route_info_create() to rtm_to_fib6_config() Kuniyuki Iwashima
2025-04-29 0:24 ` Lai, Yi
2025-04-29 1:20 ` Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 04/15] ipv6: Check GATEWAY in rtm_to_fib6_multipath_config() Kuniyuki Iwashima
2025-04-18 0:03 ` Kuniyuki Iwashima [this message]
2025-04-18 0:03 ` [PATCH v3 net-next 06/15] ipv6: Split ip6_route_info_create() Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 07/15] ipv6: Preallocate rt->fib6_nh->rt6i_pcpu in ip6_route_info_create() Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 08/15] ipv6: Preallocate nhc_pcpu_rth_output " Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 09/15] ipv6: Don't pass net to ip6_route_info_append() Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 10/15] ipv6: Rename rt6_nh.next to rt6_nh.list Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 11/15] ipv6: Factorise ip6_route_multipath_add() Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 12/15] ipv6: Protect fib6_link_table() with spinlock Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 13/15] ipv6: Defer fib6_purge_rt() in fib6_add_rt2node() to fib6_add() Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 14/15] ipv6: Protect nh->f6i_list with spinlock and flag Kuniyuki Iwashima
2025-04-18 0:03 ` [PATCH v3 net-next 15/15] ipv6: Get rid of RTNL for SIOCADDRT and RTM_NEWROUTE Kuniyuki Iwashima
2025-05-04 9:16 ` Eric Dumazet
2025-05-04 17:20 ` Kuniyuki Iwashima
2025-05-04 19:34 ` Eric Dumazet
2025-05-04 20:11 ` Kuniyuki Iwashima
2025-04-24 7:50 ` [PATCH v3 net-next 00/15] ipv6: No RTNL for IPv6 routing table patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250418000443.43734-6-kuniyu@amazon.com \
--to=kuniyu@amazon.com \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=kuni1840@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).