From: Simon Horman <horms@kernel.org>
To: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
aleksander.lobakin@intel.com, przemyslaw.kitszel@intel.com,
piotr.kwapulinski@intel.com, aleksandr.loktionov@intel.com,
jedrzej.jagielski@intel.com, larysa.zaremba@intel.com,
anthony.l.nguyen@intel.com
Subject: Re: [iwl-next v2 1/8] ice, libie: move generic adminq descriptors to lib
Date: Mon, 21 Apr 2025 11:58:30 +0100 [thread overview]
Message-ID: <20250421105830.GD2789685@horms.kernel.org> (raw)
In-Reply-To: <20250410100121.2353754-2-michal.swiatkowski@linux.intel.com>
On Thu, Apr 10, 2025 at 12:01:14PM +0200, Michal Swiatkowski wrote:
> The descriptor structure is the same in ice, ixgbe and i40e. Move it to
> common libie header to use it across different driver.
>
> Leave device specific adminq commands in separate folders. This lead to
> a change that need to be done in filling/getting descriptor:
> - previous: struct specific_desc *cmd;
> cmd = &desc.params.specific_desc;
> - now: struct specific_desc *cmd;
> cmd = libie_aq_raw(&desc);
>
> Do this changes across the driver to allow clean build. The casting only
> have to be done in case of specific descriptors, for generic one union
> can still be used.
>
> Changes beside code moving:
> - change ICE_ prefix to LIBIE_ prefix (ice_ and libie_ too)
> - remove shift variables not otherwise needed (in libie_aq_flags)
> - fill/get descriptor data based on desc.params.raw whenever the
> descriptor isn't defined in libie
> - move defines from the libie_aq_sth structure outside
> - add libie_aq_raw helper and use it instead of explicit casting
>
> Reviewed by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
...
> diff --git a/include/linux/net/intel/libie/adminq.h b/include/linux/net/intel/libie/adminq.h
> new file mode 100644
> index 000000000000..568980ddf4c1
> --- /dev/null
> +++ b/include/linux/net/intel/libie/adminq.h
> @@ -0,0 +1,269 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/* Copyright (C) 2025 Intel Corporation */
> +
> +#ifndef __LIBIE_ADMINQ_H
> +#define __LIBIE_ADMINQ_H
> +
> +#include <linux/build_bug.h>
> +#include <linux/types.h>
> +
> +#define LIBIE_CHECK_STRUCT_LEN(n, X) \
> + static_assert((n) == sizeof(struct X))
> +
> +/**
> + * struct libie_aqc_generic - Generic structure used in adminq communication
> + * @param: generic parameter
> + * @addr: generic address
nit: The struct members documented above do not match those present below.
> + */
> +struct libie_aqc_generic {
> + __le32 param0;
> + __le32 param1;
> + __le32 addr_high;
> + __le32 addr_low;
> +};
> +LIBIE_CHECK_STRUCT_LEN(16, libie_aqc_generic);
...
next prev parent reply other threads:[~2025-04-21 10:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-10 10:01 [iwl-next v2 0/8] libie: commonize adminq structure Michal Swiatkowski
2025-04-10 10:01 ` [iwl-next v2 1/8] ice, libie: move generic adminq descriptors to lib Michal Swiatkowski
2025-04-21 10:58 ` Simon Horman [this message]
2025-04-10 10:01 ` [iwl-next v2 2/8] ixgbe: use libie adminq descriptors Michal Swiatkowski
2025-04-10 10:01 ` [iwl-next v2 3/8] i40e: " Michal Swiatkowski
2025-04-10 10:01 ` [iwl-next v2 4/8] iavf: " Michal Swiatkowski
2025-04-10 10:01 ` [iwl-next v2 5/8] libie: add adminq helper for converting err to str Michal Swiatkowski
2025-04-10 10:01 ` [iwl-next v2 6/8] ice: use libie_aq_str Michal Swiatkowski
2025-04-10 10:01 ` [iwl-next v2 7/8] iavf: " Michal Swiatkowski
2025-04-10 12:50 ` Loktionov, Aleksandr
2025-04-10 10:01 ` [iwl-next v2 8/8] i40e: " Michal Swiatkowski
2025-04-15 22:59 ` [iwl-next v2 0/8] libie: commonize adminq structure Tony Nguyen
2025-04-16 8:38 ` Michal Swiatkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250421105830.GD2789685@horms.kernel.org \
--to=horms@kernel.org \
--cc=aleksander.lobakin@intel.com \
--cc=aleksandr.loktionov@intel.com \
--cc=anthony.l.nguyen@intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jedrzej.jagielski@intel.com \
--cc=larysa.zaremba@intel.com \
--cc=michal.swiatkowski@linux.intel.com \
--cc=netdev@vger.kernel.org \
--cc=piotr.kwapulinski@intel.com \
--cc=przemyslaw.kitszel@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).