Re: [PATCH net 2/3] net: stmmac: socfpga: Don't check for phy to enable the SGMII adapter

[Maxime Chevallier <maxime.chevallier@bootlin.com>]

Hi Russell,

On Tue, 22 Apr 2025 11:26:23 +0100
"Russell King (Oracle)" <linux@armlinux.org.uk> wrote:

> On Tue, Apr 22, 2025 at 11:46:56AM +0200, Maxime Chevallier wrote:
> > The SGMII adapter needs to be enabled for both Cisco SGMII and 1000BaseX
> > operations. It doesn't make sense to check for an attached phydev here,
> > as we simply might not have any, in particular if we're using the
> > 1000BaseX interface mode.
> > 
> > So, check only for the presence of a SGMII adapter to re-enable it after
> > a link config.  
> 
> I wonder whether:
> 
> 	struct stmmac_priv *priv = netdev_priv(dev_get_drvdata(dwmac->dev));
> 
> 	if ((priv->plat->phy_interface == PHY_INTERFACE_MODE_SGMII ||
> 	     priv->plat->phy_interface == PHY_INTERFACE_MODE_1000BASEX) &&
> 	    sgmii_adapter_base)
>  		writew(SGMII_ADAPTER_ENABLE,
>  		       sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
> 
> would describe the required functionality here better, making it clear
> under which interface modes we expect to set the enable bits.

That's true indeed. Thanks for the suggestion, I'll include that in V2
with your suggested-by :)

Thanks,

Maxime