[PATCH net-next v6 1/8] dt-bindings: dpll: Add DPLL device and pin

[Ivan Vecera <ivecera@redhat.com>]

Add a common DT schema for DPLL device and its associated pins.
The DPLL (device phase-locked loop) is a device used for precise clock
synchronization in networking and telecom hardware.

The device includes one or more DPLLs (channels) and one or more
physical input/output pins.

Each DPLL channel is used either to provide a pulse-per-clock signal or
to drive an Ethernet equipment clock.

The input and output pins have the following properties:
* label: specifies board label
* connection type: specifies its usage depending on wiring
* list of supported or allowed frequencies: depending on how the pin
  is connected and where)
* embedded sync capability: indicates whether the pin supports this

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
v5->v6:
* no change
v4->v5:
* removed compilation output from the description
v3->v4:
* dropped $Ref from dpll-pin reg property
* added maxItems to dpll-pin reg property
* fixed paragraph in dpll-pin desc
* dpll-pin type property renamed to connection-type
v1->v3:
* rewritten description for both device and pin
* dropped num-dplls property
* supported-frequencies property renamed to supported-frequencies-hz
---
 .../devicetree/bindings/dpll/dpll-device.yaml | 76 +++++++++++++++++++
 .../devicetree/bindings/dpll/dpll-pin.yaml    | 45 +++++++++++
 MAINTAINERS                                   |  2 +
 3 files changed, 123 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dpll/dpll-device.yaml
 create mode 100644 Documentation/devicetree/bindings/dpll/dpll-pin.yaml

diff --git a/Documentation/devicetree/bindings/dpll/dpll-device.yaml b/Documentation/devicetree/bindings/dpll/dpll-device.yaml
new file mode 100644
index 000000000000..fb8d7a9a3693
--- /dev/null
+++ b/Documentation/devicetree/bindings/dpll/dpll-device.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/dpll-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Phase-Locked Loop (DPLL) Device
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description:
+  Digital Phase-Locked Loop (DPLL) device is used for precise clock
+  synchronization in networking and telecom hardware. The device can
+  have one or more channels (DPLLs) and one or more physical input and
+  output pins. Each DPLL channel can either produce pulse-per-clock signal
+  or drive ethernet equipment clock. The type of each channel can be
+  indicated by dpll-types property.
+
+properties:
+  $nodename:
+    pattern: "^dpll(@.*)?$"
+
+  "#address-cells":
+    const: 0
+
+  "#size-cells":
+    const: 0
+
+  dpll-types:
+    description: List of DPLL channel types, one per DPLL instance.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum: [pps, eec]
+
+  input-pins:
+    type: object
+    description: DPLL input pins
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^pin@[0-9a-f]+$":
+        $ref: /schemas/dpll/dpll-pin.yaml
+        unevaluatedProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+  output-pins:
+    type: object
+    description: DPLL output pins
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^pin@[0-9]+$":
+        $ref: /schemas/dpll/dpll-pin.yaml
+        unevaluatedProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/dpll/dpll-pin.yaml b/Documentation/devicetree/bindings/dpll/dpll-pin.yaml
new file mode 100644
index 000000000000..51db93b77306
--- /dev/null
+++ b/Documentation/devicetree/bindings/dpll/dpll-pin.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/dpll-pin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DPLL Pin
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description: |
+  The DPLL pin is either a physical input or output pin that is provided
+  by a DPLL( Digital Phase-Locked Loop) device. The pin is identified by
+  its physical order number that is stored in reg property and can have
+  an additional set of properties like supported (allowed) frequencies,
+  label, type and may support embedded sync.
+
+  Note that the pin in this context has nothing to do with pinctrl.
+
+properties:
+  reg:
+    description: Hardware index of the DPLL pin.
+    maxItems: 1
+
+  connection-type:
+    description: Connection type of the pin
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ext, gnss, int, mux, synce]
+
+  esync-control:
+    description: Indicates whether the pin supports embedded sync functionality.
+    type: boolean
+
+  label:
+    description: String exposed as the pin board label
+    $ref: /schemas/types.yaml#/definitions/string
+
+  supported-frequencies-hz:
+    description: List of supported frequencies for this pin, expressed in Hz.
+
+required:
+  - reg
+
+additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index a7545b5abef9..1477fbda7378 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7195,6 +7195,8 @@ M:	Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
 M:	Jiri Pirko <jiri@resnulli.us>
 L:	netdev@vger.kernel.org
 S:	Supported
+F:	Documentation/devicetree/bindings/dpll/dpll-device.yaml
+F:	Documentation/devicetree/bindings/dpll/dpll-pin.yaml
 F:	Documentation/driver-api/dpll.rst
 F:	drivers/dpll/*
 F:	include/linux/dpll.h
-- 
2.49.0