From: Christian Marangi <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Lorenzo Bianconi <lorenzo@kernel.org>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Philipp Zabel <p.zabel@pengutronix.de>,
Nathan Chancellor <nathan@kernel.org>,
Nick Desaulniers <nick.desaulniers+lkml@gmail.com>,
Bill Wendling <morbo@google.com>,
Justin Stitt <justinstitt@google.com>,
Christian Marangi <ansuelsmth@gmail.com>,
Daniel Golle <daniel@makrotopia.org>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, llvm@lists.linux.dev
Subject: [net-next PATCH v4 03/11] net: phylink: introduce internal phylink PCS handling
Date: Sun, 11 May 2025 22:12:29 +0200 [thread overview]
Message-ID: <20250511201250.3789083-4-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20250511201250.3789083-1-ansuelsmth@gmail.com>
Introduce internal handling of PCS for phylink. This is an alternative
to .mac_select_pcs that moves the selection logic of the PCS entirely to
phylink with the usage of the supported_interface value in the PCS
struct.
MAC should now provide an array of available PCS in phylink_config in
.available_pcs and fill the .num_available_pcs with the number of
elements in the array. MAC should also define a new bitmap,
pcs_interfaces, in phylink_config to define for what interface mode a
dedicated PCS is required.
On phylink_create() this array is parsed and a linked list of PCS is
created based on the PCS passed in phylink_config.
Also the supported_interface value in phylink struct is updated with the
new supported_interface from the provided PCS.
On phylink_start() every PCS in phylink PCS list gets attached to the
phylink instance. This is done by setting the phylink value in
phylink_pcs struct to the phylink instance.
On phylink_stop(), every PCS in phylink PCS list is detached from the
phylink instance. This is done by setting the phylink value in
phylink_pcs struct to NULL.
phylink_validate_mac_and_pcs(), phylink_major_config() and
phylink_inband_caps() are updated to support this new implementation
with the PCS list stored in phylink.
They will make use of phylink_validate_pcs_interface() that will loop
for every PCS in the phylink PCS available list and find one that supports
the passed interface.
phylink_validate_pcs_interface() applies the same logic of .mac_select_pcs
where if a supported_interface value is not set for the PCS struct, then
it's assumed every interface is supported.
A MAC is required to implement either a .mac_select_pcs or make use of
the PCS list implementation. Implementing both will result in a fail
on MAC/PCS validation.
phylink value in phylink_pcs struct with this implementation is used to
track from PCS side when it's attached to a phylink instance. PCS driver
will make use of this information to correctly detach from a phylink
instance if needed.
The .mac_select_pcs implementation is not changed but it's expected that
every MAC driver migrates to the new implementation to later deprecate
and remove .mac_select_pcs.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/net/phy/phylink.c | 147 +++++++++++++++++++++++++++++++++-----
include/linux/phylink.h | 10 +++
2 files changed, 139 insertions(+), 18 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index ec42fd278604..95d7e06dee56 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -59,6 +59,9 @@ struct phylink {
/* The link configuration settings */
struct phylink_link_state link_config;
+ /* List of available PCS */
+ struct list_head pcs_list;
+
/* What interface are supported by the current link.
* Can change on removal or addition of new PCS.
*/
@@ -144,6 +147,8 @@ static const phy_interface_t phylink_sfp_interface_preference[] = {
static DECLARE_PHY_INTERFACE_MASK(phylink_sfp_interfaces);
+static void phylink_run_resolve(struct phylink *pl);
+
/**
* phylink_set_port_modes() - set the port type modes in the ethtool mask
* @mask: ethtool link mode mask
@@ -499,22 +504,59 @@ static void phylink_validate_mask_caps(unsigned long *supported,
linkmode_and(state->advertising, state->advertising, mask);
}
+static int phylink_validate_pcs_interface(struct phylink_pcs *pcs,
+ phy_interface_t interface)
+{
+ /* If PCS define an empty supported_interfaces value, assume
+ * all interface are supported.
+ */
+ if (phy_interface_empty(pcs->supported_interfaces))
+ return 0;
+
+ /* Ensure that this PCS supports the interface mode */
+ if (!test_bit(interface, pcs->supported_interfaces))
+ return -EINVAL;
+
+ return 0;
+}
+
static int phylink_validate_mac_and_pcs(struct phylink *pl,
unsigned long *supported,
struct phylink_link_state *state)
{
- struct phylink_pcs *pcs = NULL;
unsigned long capabilities;
+ struct phylink_pcs *pcs;
+ bool pcs_found = false;
int ret;
/* Get the PCS for this interface mode */
if (pl->mac_ops->mac_select_pcs) {
+ /* Make sure either PCS internal validation or .mac_select_pcs
+ * is used. Return error if both are defined.
+ */
+ if (!list_empty(&pl->pcs_list)) {
+ phylink_err(pl, "either phylink_pcs_add() or .mac_select_pcs must be used\n");
+ return -EINVAL;
+ }
+
pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface);
if (IS_ERR(pcs))
return PTR_ERR(pcs);
+
+ pcs_found = !!pcs;
+ } else {
+ /* Check every assigned PCS and search for one that supports
+ * the interface.
+ */
+ list_for_each_entry(pcs, &pl->pcs_list, list) {
+ if (!phylink_validate_pcs_interface(pcs, state->interface)) {
+ pcs_found = true;
+ break;
+ }
+ }
}
- if (pcs) {
+ if (pcs_found) {
/* The PCS, if present, must be setup before phylink_create()
* has been called. If the ops is not initialised, print an
* error and backtrace rather than oopsing the kernel.
@@ -526,13 +568,10 @@ static int phylink_validate_mac_and_pcs(struct phylink *pl,
return -EINVAL;
}
- /* Ensure that this PCS supports the interface which the MAC
- * returned it for. It is an error for the MAC to return a PCS
- * that does not support the interface mode.
- */
- if (!phy_interface_empty(pcs->supported_interfaces) &&
- !test_bit(state->interface, pcs->supported_interfaces)) {
- phylink_err(pl, "MAC returned PCS which does not support %s\n",
+ /* Recheck PCS to handle legacy way for .mac_select_pcs */
+ ret = phylink_validate_pcs_interface(pcs, state->interface);
+ if (ret) {
+ phylink_err(pl, "selected PCS does not support %s\n",
phy_modes(state->interface));
return -EINVAL;
}
@@ -937,12 +976,22 @@ static unsigned int phylink_inband_caps(struct phylink *pl,
phy_interface_t interface)
{
struct phylink_pcs *pcs;
+ bool pcs_found = false;
- if (!pl->mac_ops->mac_select_pcs)
- return 0;
+ if (pl->mac_ops->mac_select_pcs) {
+ pcs = pl->mac_ops->mac_select_pcs(pl->config,
+ interface);
+ pcs_found = !!pcs;
+ } else {
+ list_for_each_entry(pcs, &pl->pcs_list, list) {
+ if (!phylink_validate_pcs_interface(pcs, interface)) {
+ pcs_found = true;
+ break;
+ }
+ }
+ }
- pcs = pl->mac_ops->mac_select_pcs(pl->config, interface);
- if (!pcs)
+ if (!pcs_found)
return 0;
return phylink_pcs_inband_caps(pcs, interface);
@@ -1228,10 +1277,36 @@ static void phylink_major_config(struct phylink *pl, bool restart,
pl->major_config_failed = true;
return;
}
+ /* Find a PCS in available PCS list for the requested interface.
+ * This doesn't overwrite the previous .mac_select_pcs as either
+ * .mac_select_pcs or PCS list implementation are permitted.
+ *
+ * Skip searching if the MAC doesn't require a dedicaed PCS for
+ * the requested interface.
+ */
+ } else if (test_bit(state->interface, pl->config->pcs_interfaces)) {
+ bool pcs_found = false;
+
+ list_for_each_entry(pcs, &pl->pcs_list, list) {
+ if (!phylink_validate_pcs_interface(pcs,
+ state->interface)) {
+ pcs_found = true;
+ break;
+ }
+ }
+
+ if (!pcs_found) {
+ phylink_err(pl,
+ "couldn't find a PCS for %s\n",
+ phy_modes(state->interface));
- pcs_changed = pl->pcs != pcs;
+ pl->major_config_failed = true;
+ return;
+ }
}
+ pcs_changed = pl->pcs != pcs;
+
phylink_pcs_neg_mode(pl, pcs, state->interface, state->advertising);
phylink_dbg(pl, "major config, active %s/%s/%s\n",
@@ -1258,10 +1333,12 @@ static void phylink_major_config(struct phylink *pl, bool restart,
if (pcs_changed) {
phylink_pcs_disable(pl->pcs);
- if (pl->pcs)
- pl->pcs->phylink = NULL;
+ if (pl->mac_ops->mac_select_pcs) {
+ if (pl->pcs)
+ pl->pcs->phylink = NULL;
- pcs->phylink = pl;
+ pcs->phylink = pl;
+ }
pl->pcs = pcs;
}
@@ -1797,8 +1874,9 @@ struct phylink *phylink_create(struct phylink_config *config,
phy_interface_t iface,
const struct phylink_mac_ops *mac_ops)
{
+ struct phylink_pcs *pcs;
struct phylink *pl;
- int ret;
+ int i, ret;
/* Validate the supplied configuration */
if (phy_interface_empty(config->supported_interfaces)) {
@@ -1813,9 +1891,21 @@ struct phylink *phylink_create(struct phylink_config *config,
mutex_init(&pl->state_mutex);
INIT_WORK(&pl->resolve, phylink_resolve);
+ INIT_LIST_HEAD(&pl->pcs_list);
+
+ /* Fill the PCS list with available PCS from phylink config */
+ for (i = 0; i < config->num_available_pcs; i++) {
+ pcs = config->available_pcs[i];
+
+ list_add(&pcs->list, &pl->pcs_list);
+ }
phy_interface_copy(pl->supported_interfaces,
config->supported_interfaces);
+ list_for_each_entry(pcs, &pl->pcs_list, list)
+ phy_interface_or(pl->supported_interfaces,
+ pl->supported_interfaces,
+ pcs->supported_interfaces);
pl->config = config;
if (config->type == PHYLINK_NETDEV) {
@@ -1894,10 +1984,16 @@ EXPORT_SYMBOL_GPL(phylink_create);
*/
void phylink_destroy(struct phylink *pl)
{
+ struct phylink_pcs *pcs, *tmp;
+
sfp_bus_del_upstream(pl->sfp_bus);
if (pl->link_gpio)
gpiod_put(pl->link_gpio);
+ /* Remove every PCS from phylink PCS list */
+ list_for_each_entry_safe(pcs, tmp, &pl->pcs_list, list)
+ list_del(&pcs->list);
+
cancel_work_sync(&pl->resolve);
kfree(pl);
}
@@ -2374,6 +2470,7 @@ static irqreturn_t phylink_link_handler(int irq, void *data)
*/
void phylink_start(struct phylink *pl)
{
+ struct phylink_pcs *pcs;
bool poll = false;
ASSERT_RTNL();
@@ -2400,6 +2497,10 @@ void phylink_start(struct phylink *pl)
pl->pcs_state = PCS_STATE_STARTED;
+ /* link available PCS to phylink struct */
+ list_for_each_entry(pcs, &pl->pcs_list, list)
+ pcs->phylink = pl;
+
phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_STOPPED);
if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
@@ -2444,6 +2545,8 @@ EXPORT_SYMBOL_GPL(phylink_start);
*/
void phylink_stop(struct phylink *pl)
{
+ struct phylink_pcs *pcs;
+
ASSERT_RTNL();
if (pl->sfp_bus)
@@ -2461,6 +2564,14 @@ void phylink_stop(struct phylink *pl)
pl->pcs_state = PCS_STATE_DOWN;
phylink_pcs_disable(pl->pcs);
+
+ /* Drop link between phylink and PCS */
+ list_for_each_entry(pcs, &pl->pcs_list, list)
+ pcs->phylink = NULL;
+
+ /* Restore original supported interfaces */
+ phy_interface_copy(pl->supported_interfaces,
+ pl->config->supported_interfaces);
}
EXPORT_SYMBOL_GPL(phylink_stop);
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 30659b615fca..ef0b5a0729c8 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -150,12 +150,16 @@ enum phylink_op_type {
* if MAC link is at %MLO_AN_FIXED mode.
* @supported_interfaces: bitmap describing which PHY_INTERFACE_MODE_xxx
* are supported by the MAC/PCS.
+ * @pcs_interfaces: bitmap describing for which PHY_INTERFACE_MODE_xxx a
+ * dedicated PCS is required.
* @lpi_interfaces: bitmap describing which PHY interface modes can support
* LPI signalling.
* @mac_capabilities: MAC pause/speed/duplex capabilities.
* @lpi_capabilities: MAC speeds which can support LPI signalling
* @lpi_timer_default: Default EEE LPI timer setting.
* @eee_enabled_default: If set, EEE will be enabled by phylink at creation time
+ * @available_pcs: array of available phylink_pcs PCS
+ * @num_available_pcs: num of available phylink_pcs PCS
*/
struct phylink_config {
struct device *dev;
@@ -168,11 +172,14 @@ struct phylink_config {
void (*get_fixed_state)(struct phylink_config *config,
struct phylink_link_state *state);
DECLARE_PHY_INTERFACE_MASK(supported_interfaces);
+ DECLARE_PHY_INTERFACE_MASK(pcs_interfaces);
DECLARE_PHY_INTERFACE_MASK(lpi_interfaces);
unsigned long mac_capabilities;
unsigned long lpi_capabilities;
u32 lpi_timer_default;
bool eee_enabled_default;
+ struct phylink_pcs **available_pcs;
+ unsigned int num_available_pcs;
};
void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed);
@@ -469,6 +476,9 @@ struct phylink_pcs {
struct phylink *phylink;
bool poll;
bool rxc_always_on;
+
+ /* private: */
+ struct list_head list;
};
/**
--
2.48.1
next prev parent reply other threads:[~2025-05-11 20:13 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-11 20:12 [net-next PATCH v4 00/11] net: pcs: Introduce support for fwnode PCS Christian Marangi
2025-05-11 20:12 ` [net-next PATCH v4 01/11] net: phy: introduce phy_interface_copy helper Christian Marangi
2025-05-13 18:18 ` Sean Anderson
2025-05-11 20:12 ` [net-next PATCH v4 02/11] net: phylink: keep and use MAC supported_interfaces in phylink struct Christian Marangi
2025-05-11 20:12 ` Christian Marangi [this message]
2025-05-13 18:18 ` [net-next PATCH v4 03/11] net: phylink: introduce internal phylink PCS handling Sean Anderson
2025-05-13 19:03 ` Daniel Golle
2025-05-13 19:23 ` Sean Anderson
2025-05-13 19:42 ` Sean Anderson
2025-05-14 3:00 ` Daniel Golle
2025-05-19 18:10 ` Sean Anderson
2025-05-19 23:28 ` Sean Anderson
2025-05-11 20:12 ` [net-next PATCH v4 04/11] net: phylink: add phylink_release_pcs() to externally release a PCS Christian Marangi
2025-05-11 20:12 ` [net-next PATCH v4 05/11] net: pcs: implement Firmware node support for PCS driver Christian Marangi
2025-05-13 18:40 ` Sean Anderson
2025-05-11 20:12 ` [net-next PATCH v4 06/11] net: phylink: support late PCS provider attach Christian Marangi
2025-05-11 20:12 ` [net-next PATCH v4 07/11] dt-bindings: net: ethernet-controller: permit to define multiple PCS Christian Marangi
2025-05-13 18:16 ` Sean Anderson
2025-05-14 21:32 ` Rob Herring
2025-05-11 20:12 ` [net-next PATCH v4 08/11] net: phylink: add .pcs_link_down PCS OP Christian Marangi
2025-05-13 18:44 ` Sean Anderson
2025-05-11 20:12 ` [net-next PATCH v4 09/11] dt-bindings: net: pcs: Document support for Airoha Ethernet PCS Christian Marangi
2025-05-13 18:25 ` Sean Anderson
2025-05-11 20:12 ` [net-next PATCH v4 10/11] net: pcs: airoha: add PCS driver for Airoha SoC Christian Marangi
2025-05-11 20:12 ` [net-next PATCH v4 11/11] net: airoha: add phylink support for GDM2/3/4 Christian Marangi
2025-05-12 9:21 ` Lorenzo Bianconi
2025-05-12 9:27 ` Christian Marangi
2025-05-12 12:53 ` Lorenzo Bianconi
2025-05-13 18:50 ` Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250511201250.3789083-4-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=justinstitt@google.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=llvm@lists.linux.dev \
--cc=lorenzo@kernel.org \
--cc=morbo@google.com \
--cc=nathan@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nick.desaulniers+lkml@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).