From: Gerhard Engleder <gerhard@engleder-embedded.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, edumazet@google.com,
pabeni@redhat.com, andrew+netdev@lunn.ch,
Gerhard Engleder <gerhard@engleder-embedded.com>,
Vladimir Oltean <vladimir.oltean@nxp.com>
Subject: [PATCH net v2] tsnep: fix timestamping with a stacked DSA driver
Date: Wed, 14 May 2025 21:56:57 +0200 [thread overview]
Message-ID: <20250514195657.25874-1-gerhard@engleder-embedded.com> (raw)
This driver is susceptible to a form of the bug explained in commit
c26a2c2ddc01 ("gianfar: Fix TX timestamping with a stacked DSA driver")
and in Documentation/networking/timestamping.rst section "Other caveats
for MAC drivers", specifically it timestamps any skb which has
SKBTX_HW_TSTAMP, and does not consider if timestamping has been enabled
in adapter->hwtstamp_config.tx_type.
Evaluate the proper TX timestamping condition only once on the TX
path (in tsnep_xmit_frame_ring()) and store the result in an additional
TX entry flag. Evaluate the new TX entry flag in the TX confirmation path
(in tsnep_tx_poll()).
This way SKBTX_IN_PROGRESS is set by the driver as required, but never
evaluated. SKBTX_IN_PROGRESS shall not be evaluated as it can be set
by a stacked DSA driver and evaluating it would lead to unwanted
timestamps.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
---
v2:
- took over patch from Vladimir Oltean (thank you for your work, I hope
the Suggested-by is ok for you, I was not sure about Co-developed-by)
- do TX timestamp check only in tsnep_xmit_frame_ring() and store result
in TX entry flag
---
drivers/net/ethernet/engleder/tsnep_main.c | 30 ++++++++++++++--------
1 file changed, 19 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/engleder/tsnep_main.c b/drivers/net/ethernet/engleder/tsnep_main.c
index 61a23413b577..48e08e550c57 100644
--- a/drivers/net/ethernet/engleder/tsnep_main.c
+++ b/drivers/net/ethernet/engleder/tsnep_main.c
@@ -74,6 +74,8 @@
#define TSNEP_TX_TYPE_XDP_NDO_MAP_PAGE (TSNEP_TX_TYPE_XDP_NDO | TSNEP_TX_TYPE_MAP_PAGE)
#define TSNEP_TX_TYPE_XDP (TSNEP_TX_TYPE_XDP_TX | TSNEP_TX_TYPE_XDP_NDO)
#define TSNEP_TX_TYPE_XSK BIT(12)
+#define TSNEP_TX_TYPE_TSTAMP BIT(13)
+#define TSNEP_TX_TYPE_SKB_TSTAMP (TSNEP_TX_TYPE_SKB | TSNEP_TX_TYPE_TSTAMP)
#define TSNEP_XDP_TX BIT(0)
#define TSNEP_XDP_REDIRECT BIT(1)
@@ -393,8 +395,7 @@ static void tsnep_tx_activate(struct tsnep_tx *tx, int index, int length,
if (entry->skb) {
entry->properties = length & TSNEP_DESC_LENGTH_MASK;
entry->properties |= TSNEP_DESC_INTERRUPT_FLAG;
- if ((entry->type & TSNEP_TX_TYPE_SKB) &&
- (skb_shinfo(entry->skb)->tx_flags & SKBTX_IN_PROGRESS))
+ if ((entry->type & TSNEP_TX_TYPE_SKB_TSTAMP) == TSNEP_TX_TYPE_SKB_TSTAMP)
entry->properties |= TSNEP_DESC_EXTENDED_WRITEBACK_FLAG;
/* toggle user flag to prevent false acknowledge
@@ -486,7 +487,8 @@ static int tsnep_tx_map_frag(skb_frag_t *frag, struct tsnep_tx_entry *entry,
return mapped;
}
-static int tsnep_tx_map(struct sk_buff *skb, struct tsnep_tx *tx, int count)
+static int tsnep_tx_map(struct sk_buff *skb, struct tsnep_tx *tx, int count,
+ bool do_tstamp)
{
struct device *dmadev = tx->adapter->dmadev;
struct tsnep_tx_entry *entry;
@@ -512,6 +514,9 @@ static int tsnep_tx_map(struct sk_buff *skb, struct tsnep_tx *tx, int count)
entry->type = TSNEP_TX_TYPE_SKB_INLINE;
mapped = 0;
}
+
+ if (do_tstamp)
+ entry->type |= TSNEP_TX_TYPE_TSTAMP;
} else {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1];
@@ -565,11 +570,12 @@ static int tsnep_tx_unmap(struct tsnep_tx *tx, int index, int count)
static netdev_tx_t tsnep_xmit_frame_ring(struct sk_buff *skb,
struct tsnep_tx *tx)
{
- int count = 1;
struct tsnep_tx_entry *entry;
+ bool do_tstamp = false;
+ int count = 1;
int length;
- int i;
int retval;
+ int i;
if (skb_shinfo(skb)->nr_frags > 0)
count += skb_shinfo(skb)->nr_frags;
@@ -586,7 +592,13 @@ static netdev_tx_t tsnep_xmit_frame_ring(struct sk_buff *skb,
entry = &tx->entry[tx->write];
entry->skb = skb;
- retval = tsnep_tx_map(skb, tx, count);
+ if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+ tx->adapter->hwtstamp_config.tx_type == HWTSTAMP_TX_ON) {
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ do_tstamp = true;
+ }
+
+ retval = tsnep_tx_map(skb, tx, count, do_tstamp);
if (retval < 0) {
tsnep_tx_unmap(tx, tx->write, count);
dev_kfree_skb_any(entry->skb);
@@ -598,9 +610,6 @@ static netdev_tx_t tsnep_xmit_frame_ring(struct sk_buff *skb,
}
length = retval;
- if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
- skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
-
for (i = 0; i < count; i++)
tsnep_tx_activate(tx, (tx->write + i) & TSNEP_RING_MASK, length,
i == count - 1);
@@ -851,8 +860,7 @@ static bool tsnep_tx_poll(struct tsnep_tx *tx, int napi_budget)
length = tsnep_tx_unmap(tx, tx->read, count);
- if ((entry->type & TSNEP_TX_TYPE_SKB) &&
- (skb_shinfo(entry->skb)->tx_flags & SKBTX_IN_PROGRESS) &&
+ if (((entry->type & TSNEP_TX_TYPE_SKB_TSTAMP) == TSNEP_TX_TYPE_SKB_TSTAMP) &&
(__le32_to_cpu(entry->desc_wb->properties) &
TSNEP_DESC_EXTENDED_WRITEBACK_FLAG)) {
struct skb_shared_hwtstamps hwtstamps;
--
2.39.5
next reply other threads:[~2025-05-14 20:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-14 19:56 Gerhard Engleder [this message]
2025-05-15 9:16 ` [PATCH net v2] tsnep: fix timestamping with a stacked DSA driver Vladimir Oltean
2025-05-15 15:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250514195657.25874-1-gerhard@engleder-embedded.com \
--to=gerhard@engleder-embedded.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox