Re: [RFC net-next 13/15] dt-bindings: net: cpc: add silabs,cpc-spi.yaml

[Rob Herring <robh@kernel.org>]

On Sun, May 11, 2025 at 09:27:46PM -0400, Damien Riégel wrote:
> Document device tree bindings for Silicon Labs CPC over a SPI bus. This
> device requires both a chip select and an interrupt line to be able to
> work.

What's CPC? Never defined here.

Bindings are for devices, not a SPI protocol. What if the device needs 
reset or power or ??? before you can talk to it. Maybe it's a situation 
where that will never matter, but you've got to spell it out here.

> 
> Signed-off-by: Damien Riégel <damien.riegel@silabs.com>
> ---
>  .../bindings/net/silabs,cpc-spi.yaml          | 54 +++++++++++++++++++
>  1 file changed, 54 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/silabs,cpc-spi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/silabs,cpc-spi.yaml b/Documentation/devicetree/bindings/net/silabs,cpc-spi.yaml
> new file mode 100644
> index 00000000000..82d3cd47daa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/silabs,cpc-spi.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2024 Silicon Labs Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/silabs,cpc-spi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SPI driver for CPC
> +
> +maintainers:
> +  - Damien Riégel <damien.riegel@silabs.com>
> +
> +description: |

Don't need '|'

> +  This binding is for the implementation of CPC protocol over SPI. The protocol
> +  consists of a chain of header+payload frames. The interrupt is used by the
> +  device to signal it has a frame to transmit, but also between headers and
> +  payloads to signal that it is ready to receive payload.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - silabs,cpc-spi
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupt
> +
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    spi {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            cpcspi@0 {
> +                  compatible = "silabs,cpc-spi";
> +                  reg = <0>;
> +                  spi-max-frequency = <1000000>;
> +                  interrupt-parent = <&gpio>;
> +                  interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
> +            };
> +    };
> -- 
> 2.49.0
>