From: Ido Schimmel <idosch@nvidia.com>
To: <netdev@vger.kernel.org>, <bridge@lists.linux.dev>
Cc: <davem@davemloft.net>, <kuba@kernel.org>, <pabeni@redhat.com>,
<edumazet@google.com>, <razor@blackwall.org>,
<venkat.x.venkatsubra@oracle.com>, <horms@kernel.org>,
<pablo@netfilter.org>, <fw@strlen.de>,
Ido Schimmel <idosch@nvidia.com>
Subject: [PATCH net] bridge: netfilter: Fix forwarding of fragmented packets
Date: Thu, 15 May 2025 11:48:48 +0300 [thread overview]
Message-ID: <20250515084848.727706-1-idosch@nvidia.com> (raw)
When netfilter defrag hooks are loaded (due to the presence of conntrack
rules, for example), fragmented packets entering the bridge will be
defragged by the bridge's pre-routing hook (br_nf_pre_routing() ->
ipv4_conntrack_defrag()).
Later on, in the bridge's post-routing hook, the defragged packet will
be fragmented again. If the size of the largest fragment is larger than
what the kernel has determined as the destination MTU (using
ip_skb_dst_mtu()), the defragged packet will be dropped.
Before commit ac6627a28dbf ("net: ipv4: Consolidate ipv4_mtu and
ip_dst_mtu_maybe_forward"), ip_skb_dst_mtu() would return dst_mtu() as
the destination MTU. Assuming the dst entry attached to the packet is
the bridge's fake rtable one, this would simply be the bridge's MTU (see
fake_mtu()).
However, after above mentioned commit, ip_skb_dst_mtu() ends up
returning the route's MTU stored in the dst entry's metrics. Ideally, in
case the dst entry is the bridge's fake rtable one, this should be the
bridge's MTU as the bridge takes care of updating this metric when its
MTU changes (see br_change_mtu()).
Unfortunately, the last operation is a no-op given the metrics attached
to the fake rtable entry are marked as read-only. Therefore,
ip_skb_dst_mtu() ends up returning 1500 (the initial MTU value) and
defragged packets are dropped during fragmentation when dealing with
large fragments and high MTU (e.g., 9k).
Fix by moving the fake rtable entry's metrics to be per-bridge (in a
similar fashion to the fake rtable entry itself) and marking them as
writable, thereby allowing MTU changes to be reflected.
Fixes: 62fa8a846d7d ("net: Implement read-only protection and COW'ing of metrics.")
Fixes: 33eb9873a283 ("bridge: initialize fake_rtable metrics")
Reported-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Closes: https://lore.kernel.org/netdev/PH0PR10MB4504888284FF4CBA648197D0ACB82@PH0PR10MB4504.namprd10.prod.outlook.com/
Tested-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
---
net/bridge/br_nf_core.c | 7 ++-----
net/bridge/br_private.h | 1 +
2 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/net/bridge/br_nf_core.c b/net/bridge/br_nf_core.c
index 98aea5485aae..a8c67035e23c 100644
--- a/net/bridge/br_nf_core.c
+++ b/net/bridge/br_nf_core.c
@@ -65,17 +65,14 @@ static struct dst_ops fake_dst_ops = {
* ipt_REJECT needs it. Future netfilter modules might
* require us to fill additional fields.
*/
-static const u32 br_dst_default_metrics[RTAX_MAX] = {
- [RTAX_MTU - 1] = 1500,
-};
-
void br_netfilter_rtable_init(struct net_bridge *br)
{
struct rtable *rt = &br->fake_rtable;
rcuref_init(&rt->dst.__rcuref, 1);
rt->dst.dev = br->dev;
- dst_init_metrics(&rt->dst, br_dst_default_metrics, true);
+ dst_init_metrics(&rt->dst, br->metrics, false);
+ dst_metric_set(&rt->dst, RTAX_MTU, br->dev->mtu);
rt->dst.flags = DST_NOXFRM | DST_FAKE_RTABLE;
rt->dst.ops = &fake_dst_ops;
}
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index d5b3c5936a79..4715a8d6dc32 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -505,6 +505,7 @@ struct net_bridge {
struct rtable fake_rtable;
struct rt6_info fake_rt6_info;
};
+ u32 metrics[RTAX_MAX];
#endif
u16 group_fwd_mask;
u16 group_fwd_mask_required;
--
2.49.0
next reply other threads:[~2025-05-15 8:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-15 8:48 Ido Schimmel [this message]
2025-05-15 15:36 ` [PATCH net] bridge: netfilter: Fix forwarding of fragmented packets Nikolay Aleksandrov
2025-05-16 23:10 ` patchwork-bot+netdevbpf
2025-05-16 23:55 ` Pablo Neira Ayuso
2025-05-18 6:47 ` Ido Schimmel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250515084848.727706-1-idosch@nvidia.com \
--to=idosch@nvidia.com \
--cc=bridge@lists.linux.dev \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=fw@strlen.de \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pablo@netfilter.org \
--cc=razor@blackwall.org \
--cc=venkat.x.venkatsubra@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).