[PATCH] net: dwmac-rk: No need to check the return value of the phy_power_on()

[李哲 <sensor1010@163.com>]

phy_power_on() is a local scope one within the driver, since the return
value of the phy_power_on() function is always 0, checking its return
value is redundant.

Signed-off-by: 李哲 <sensor1010@163.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 700858ff6f7c..f7c32934f8a4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1645,23 +1645,18 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
 	return 0;
 }
 
-static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
+static void phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
 {
 	struct regulator *ldo = bsp_priv->regulator;
-	int ret;
 	struct device *dev = &bsp_priv->pdev->dev;
 
 	if (enable) {
-		ret = regulator_enable(ldo);
-		if (ret)
+		if (regulator_enable(ldo))
 			dev_err(dev, "fail to enable phy-supply\n");
 	} else {
-		ret = regulator_disable(ldo);
-		if (ret)
+		if (regulator_disable(ldo))
 			dev_err(dev, "fail to disable phy-supply\n");
 	}
-
-	return 0;
 }
 
 static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
@@ -1839,11 +1834,7 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
 		dev_err(dev, "NO interface defined!\n");
 	}
 
-	ret = phy_power_on(bsp_priv, true);
-	if (ret) {
-		gmac_clk_enable(bsp_priv, false);
-		return ret;
-	}
+	phy_power_on(bsp_priv, true);
 
 	pm_runtime_get_sync(dev);
 
-- 
2.17.1