[PATCH net v2 1/5] net: dsa: b53: do not enable EEE on bcm63xx

[Jonas Gorski <jonas.gorski@gmail.com>]

BCM63xx internal switches do not support EEE, but provide multiple RGMII
ports where external PHYs may be connected. If one of these PHYs are EEE
capable, we may try to enable EEE for the MACs, which then hangs the
system on access of the (non-existent) EEE registers.

Fix this by checking if the switch actually supports EEE before
attempting to configure it.

Fixes: 22256b0afb12 ("net: dsa: b53: Move EEE functions to b53")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
v1 -> v2:
* add Reviewed-by, Tested-by

 drivers/net/dsa/b53/b53_common.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 132683ed3abe..8a6a370c8580 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2353,6 +2353,9 @@ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
 	int ret;
 
+	if (!b53_support_eee(ds, port))
+		return 0;
+
 	ret = phy_init_eee(phy, false);
 	if (ret)
 		return 0;
@@ -2367,7 +2370,7 @@ bool b53_support_eee(struct dsa_switch *ds, int port)
 {
 	struct b53_device *dev = ds->priv;
 
-	return !is5325(dev) && !is5365(dev);
+	return !is5325(dev) && !is5365(dev) && !is63xx(dev);
 }
 EXPORT_SYMBOL(b53_support_eee);
 
-- 
2.43.0