* [PATCH 2/6] arm64: dts: imx93: remove eee-broken-1000t for eqos node
[not found] <20250605205853.1334131-1-Frank.Li@nxp.com>
@ 2025-06-05 20:58 ` Frank Li
2025-06-09 10:10 ` Peng Fan
0 siblings, 1 reply; 2+ messages in thread
From: Frank Li @ 2025-06-05 20:58 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Richard Cochran,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
open list,
open list:PTP HARDWARE CLOCK SUPPORT:Keyword:(?:b|_)ptp(?:b|_)
Cc: imx
From: Clark Wang <xiaoning.wang@nxp.com>
The "eee-broken-1000t" was added on 8mm for FEC to avoid issue of ptp sync.
EQoS haven't such issue. So, remove this for EQoS phys.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 1 -
arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 8491eb53120e6..a6ebeb642eb65 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -217,7 +217,6 @@ mdio {
ethphy1: ethernet-phy@1 {
reg = <1>;
- eee-broken-1000t;
reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <80000>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
index acbd981ba548a..cceca130c5b4e 100644
--- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
@@ -184,7 +184,6 @@ mdio {
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
- eee-broken-1000t;
reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <80000>;
--
2.34.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 2/6] arm64: dts: imx93: remove eee-broken-1000t for eqos node
2025-06-05 20:58 ` [PATCH 2/6] arm64: dts: imx93: remove eee-broken-1000t for eqos node Frank Li
@ 2025-06-09 10:10 ` Peng Fan
0 siblings, 0 replies; 2+ messages in thread
From: Peng Fan @ 2025-06-09 10:10 UTC (permalink / raw)
To: Frank Li
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Richard Cochran,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
open list,
open list:PTP HARDWARE CLOCK SUPPORT:Keyword:(?:b|_)ptp(?:b|_)
On Thu, Jun 05, 2025 at 04:58:49PM -0400, Frank Li wrote:
>From: Clark Wang <xiaoning.wang@nxp.com>
>
>The "eee-broken-1000t" was added on 8mm for FEC to avoid issue of ptp sync.
>EQoS haven't such issue. So, remove this for EQoS phys.
>
>Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-06-09 9:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20250605205853.1334131-1-Frank.Li@nxp.com>
2025-06-05 20:58 ` [PATCH 2/6] arm64: dts: imx93: remove eee-broken-1000t for eqos node Frank Li
2025-06-09 10:10 ` Peng Fan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).