From: Donald Hunter <donald.hunter@gmail.com>
To: netdev@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>, Simon Horman <horms@kernel.org>,
mptcp@lists.linux.dev, kernel-tls-handshake@lists.linux.dev,
bpf@vger.kernel.org
Cc: donald.hunter@redhat.com, Donald Hunter <donald.hunter@gmail.com>
Subject: [PATCH net-next v1 5/7] netlink: specs: fix up indentation errors
Date: Tue, 10 Jun 2025 13:59:42 +0100 [thread overview]
Message-ID: <20250610125944.85265-6-donald.hunter@gmail.com> (raw)
In-Reply-To: <20250610125944.85265-1-donald.hunter@gmail.com>
Clean up all indentation related errors reported by yamllint in the
netlink specs, e.g.
error wrong indentation: expected 6 but found 5 (indentation)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
---
Documentation/netlink/specs/conntrack.yaml | 36 ++---
Documentation/netlink/specs/devlink.yaml | 8 +-
Documentation/netlink/specs/ethtool.yaml | 54 ++++----
Documentation/netlink/specs/mptcp_pm.yaml | 150 ++++++++++-----------
Documentation/netlink/specs/netdev.yaml | 2 +-
5 files changed, 125 insertions(+), 125 deletions(-)
diff --git a/Documentation/netlink/specs/conntrack.yaml b/Documentation/netlink/specs/conntrack.yaml
index e48add669b6d..c6832633ab7b 100644
--- a/Documentation/netlink/specs/conntrack.yaml
+++ b/Documentation/netlink/specs/conntrack.yaml
@@ -195,17 +195,17 @@ attribute-sets:
-
name: tuple-attrs
attributes:
- -
+ -
name: tuple-ip
type: nest
nested-attributes: tuple-ip-attrs
doc: conntrack l3 information
- -
+ -
name: tuple-proto
type: nest
nested-attributes: tuple-proto-attrs
doc: conntrack l4 information
- -
+ -
name: tuple-zone
type: u16
byte-order: big-endian
@@ -213,74 +213,74 @@ attribute-sets:
-
name: protoinfo-tcp-attrs
attributes:
- -
+ -
name: tcp-state
type: u8
enum: nf-ct-tcp-state
doc: tcp connection state
- -
+ -
name: tcp-wscale-original
type: u8
doc: window scaling factor in original direction
- -
+ -
name: tcp-wscale-reply
type: u8
doc: window scaling factor in reply direction
- -
+ -
name: tcp-flags-original
type: binary
struct: nf-ct-tcp-flags-mask
- -
+ -
name: tcp-flags-reply
type: binary
struct: nf-ct-tcp-flags-mask
-
name: protoinfo-dccp-attrs
attributes:
- -
+ -
name: dccp-state
type: u8
doc: dccp connection state
- -
+ -
name: dccp-role
type: u8
- -
+ -
name: dccp-handshake-seq
type: u64
byte-order: big-endian
- -
+ -
name: dccp-pad
type: pad
-
name: protoinfo-sctp-attrs
attributes:
- -
+ -
name: sctp-state
type: u8
doc: sctp connection state
enum: nf-ct-sctp-state
- -
+ -
name: vtag-original
type: u32
byte-order: big-endian
- -
+ -
name: vtag-reply
type: u32
byte-order: big-endian
-
name: protoinfo-attrs
attributes:
- -
+ -
name: protoinfo-tcp
type: nest
nested-attributes: protoinfo-tcp-attrs
doc: conntrack tcp state information
- -
+ -
name: protoinfo-dccp
type: nest
nested-attributes: protoinfo-dccp-attrs
doc: conntrack dccp state information
- -
+ -
name: protoinfo-sctp
type: nest
nested-attributes: protoinfo-sctp-attrs
diff --git a/Documentation/netlink/specs/devlink.yaml b/Documentation/netlink/specs/devlink.yaml
index 939e7e12fe30..6f5348f3d08f 100644
--- a/Documentation/netlink/specs/devlink.yaml
+++ b/Documentation/netlink/specs/devlink.yaml
@@ -812,14 +812,14 @@ attribute-sets:
name: rate-parent-node-name
type: string
-
- name: region-max-snapshots
- type: u32
+ name: region-max-snapshots
+ type: u32
-
name: linecard-index
type: u32
-
- name: linecard-state
- type: u8
+ name: linecard-state
+ type: u8
-
name: linecard-type
type: string
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 0b6a1db71ef5..35b1cb4834a4 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -60,33 +60,33 @@ definitions:
name-prefix: ethtool-c33-pse-ext-state-
header: linux/ethtool.h
entries:
- -
- name: none
- doc: none
- -
- name: error-condition
- doc: Group of error_condition states
- -
- name: mr-mps-valid
- doc: Group of mr_mps_valid states
- -
- name: mr-pse-enable
- doc: Group of mr_pse_enable states
- -
- name: option-detect-ted
- doc: Group of option_detect_ted states
- -
- name: option-vport-lim
- doc: Group of option_vport_lim states
- -
- name: ovld-detected
- doc: Group of ovld_detected states
- -
- name: power-not-available
- doc: Group of power_not_available states
- -
- name: short-detected
- doc: Group of short_detected states
+ -
+ name: none
+ doc: none
+ -
+ name: error-condition
+ doc: Group of error_condition states
+ -
+ name: mr-mps-valid
+ doc: Group of mr_mps_valid states
+ -
+ name: mr-pse-enable
+ doc: Group of mr_pse_enable states
+ -
+ name: option-detect-ted
+ doc: Group of option_detect_ted states
+ -
+ name: option-vport-lim
+ doc: Group of option_vport_lim states
+ -
+ name: ovld-detected
+ doc: Group of ovld_detected states
+ -
+ name: power-not-available
+ doc: Group of power_not_available states
+ -
+ name: short-detected
+ doc: Group of short_detected states
-
name: phy-upstream-type
enum-name: phy-upstream
diff --git a/Documentation/netlink/specs/mptcp_pm.yaml b/Documentation/netlink/specs/mptcp_pm.yaml
index 1d47ad86d619..84ddf9053f2e 100644
--- a/Documentation/netlink/specs/mptcp_pm.yaml
+++ b/Documentation/netlink/specs/mptcp_pm.yaml
@@ -17,72 +17,72 @@ definitions:
enum-name: mptcp-event-type
name-prefix: mptcp-event-
entries:
- -
- name: unspec
- doc: unused event
- -
- name: created
- doc: >-
- A new MPTCP connection has been created. It is the good time to
- allocate memory and send ADD_ADDR if needed. Depending on the
- traffic-patterns it can take a long time until the
- MPTCP_EVENT_ESTABLISHED is sent.
- Attributes: token, family, saddr4 | saddr6, daddr4 | daddr6, sport,
- dport, server-side.
- -
- name: established
- doc: >-
- A MPTCP connection is established (can start new subflows).
- Attributes: token, family, saddr4 | saddr6, daddr4 | daddr6, sport,
- dport, server-side.
- -
- name: closed
- doc: >-
- A MPTCP connection has stopped.
- Attribute: token.
- -
- name: announced
- value: 6
- doc: >-
- A new address has been announced by the peer.
- Attributes: token, rem_id, family, daddr4 | daddr6 [, dport].
- -
- name: removed
- doc: >-
- An address has been lost by the peer.
- Attributes: token, rem_id.
- -
- name: sub-established
- value: 10
- doc: >-
- A new subflow has been established. 'error' should not be set.
- Attributes: token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 |
- daddr6, sport, dport, backup, if_idx [, error].
- -
- name: sub-closed
- doc: >-
- A subflow has been closed. An error (copy of sk_err) could be set if an
- error has been detected for this subflow.
- Attributes: token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 |
- daddr6, sport, dport, backup, if_idx [, error].
- -
- name: sub-priority
- value: 13
- doc: >-
- The priority of a subflow has changed. 'error' should not be set.
- Attributes: token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 |
- daddr6, sport, dport, backup, if_idx [, error].
- -
- name: listener-created
- value: 15
- doc: >-
- A new PM listener is created.
- Attributes: family, sport, saddr4 | saddr6.
- -
- name: listener-closed
- doc: >-
- A PM listener is closed.
- Attributes: family, sport, saddr4 | saddr6.
+ -
+ name: unspec
+ doc: unused event
+ -
+ name: created
+ doc: >-
+ A new MPTCP connection has been created. It is the good time to
+ allocate memory and send ADD_ADDR if needed. Depending on the
+ traffic-patterns it can take a long time until the
+ MPTCP_EVENT_ESTABLISHED is sent.
+ Attributes: token, family, saddr4 | saddr6, daddr4 | daddr6, sport,
+ dport, server-side.
+ -
+ name: established
+ doc: >-
+ A MPTCP connection is established (can start new subflows).
+ Attributes: token, family, saddr4 | saddr6, daddr4 | daddr6, sport,
+ dport, server-side.
+ -
+ name: closed
+ doc: >-
+ A MPTCP connection has stopped.
+ Attribute: token.
+ -
+ name: announced
+ value: 6
+ doc: >-
+ A new address has been announced by the peer.
+ Attributes: token, rem_id, family, daddr4 | daddr6 [, dport].
+ -
+ name: removed
+ doc: >-
+ An address has been lost by the peer.
+ Attributes: token, rem_id.
+ -
+ name: sub-established
+ value: 10
+ doc: >-
+ A new subflow has been established. 'error' should not be set.
+ Attributes: token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 |
+ daddr6, sport, dport, backup, if_idx [, error].
+ -
+ name: sub-closed
+ doc: >-
+ A subflow has been closed. An error (copy of sk_err) could be set if an
+ error has been detected for this subflow.
+ Attributes: token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 |
+ daddr6, sport, dport, backup, if_idx [, error].
+ -
+ name: sub-priority
+ value: 13
+ doc: >-
+ The priority of a subflow has changed. 'error' should not be set.
+ Attributes: token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 |
+ daddr6, sport, dport, backup, if_idx [, error].
+ -
+ name: listener-created
+ value: 15
+ doc: >-
+ A new PM listener is created.
+ Attributes: family, sport, saddr4 | saddr6.
+ -
+ name: listener-closed
+ doc: >-
+ A PM listener is closed.
+ Attributes: family, sport, saddr4 | saddr6.
attribute-sets:
-
@@ -298,15 +298,15 @@ operations:
do: &get-addr-attrs
request:
attributes:
- - addr
- - token
+ - addr
+ - token
reply:
attributes:
- - addr
+ - addr
dump:
reply:
- attributes:
- - addr
+ attributes:
+ - addr
-
name: flush-addrs
doc: Flush addresses
@@ -332,7 +332,7 @@ operations:
dont-validate: [strict]
do: &mptcp-get-limits
request:
- attributes:
+ attributes:
- rcv-add-addrs
- subflows
reply:
@@ -370,9 +370,9 @@ operations:
flags: [uns-admin-perm]
do:
request:
- attributes:
- - token
- - loc-id
+ attributes:
+ - token
+ - loc-id
-
name: subflow-create
doc: Create subflow
diff --git a/Documentation/netlink/specs/netdev.yaml b/Documentation/netlink/specs/netdev.yaml
index 0422a73776d4..6819c3636841 100644
--- a/Documentation/netlink/specs/netdev.yaml
+++ b/Documentation/netlink/specs/netdev.yaml
@@ -31,7 +31,7 @@ definitions:
-
name: hw-offload
doc:
- This feature informs if netdev supports XDP hw offloading.
+ This feature informs if netdev supports XDP hw offloading.
-
name: rx-sg
doc:
--
2.49.0
next prev parent reply other threads:[~2025-06-10 13:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-10 12:59 [PATCH net-next v1 0/7] netlink: specs: fix all the yamllint errors Donald Hunter
2025-06-10 12:59 ` [PATCH net-next v1 1/7] netlink: specs: add doc start markers to yaml Donald Hunter
2025-06-10 12:59 ` [PATCH net-next v1 2/7] netlink: specs: clean up spaces in brackets Donald Hunter
2025-06-10 12:59 ` [PATCH net-next v1 3/7] netlink: specs: fix up spaces before comments Donald Hunter
2025-06-10 12:59 ` [PATCH net-next v1 4/7] netlink: specs: fix up truthy values Donald Hunter
2025-06-10 12:59 ` Donald Hunter [this message]
2025-06-10 12:59 ` [PATCH net-next v1 6/7] netlink: specs: wrap long doc lines (>80 chars) Donald Hunter
2025-06-10 12:59 ` [PATCH net-next v1 7/7] netlink: specs: fix a couple of yamllint warnings Donald Hunter
2025-06-10 13:20 ` [PATCH net-next v1 0/7] netlink: specs: fix all the yamllint errors Chuck Lever
2025-06-10 17:04 ` Matthieu Baerts
2025-06-11 21:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250610125944.85265-6-donald.hunter@gmail.com \
--to=donald.hunter@gmail.com \
--cc=bpf@vger.kernel.org \
--cc=davem@davemloft.net \
--cc=donald.hunter@redhat.com \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kernel-tls-handshake@lists.linux.dev \
--cc=kuba@kernel.org \
--cc=mptcp@lists.linux.dev \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).