From: Jakub Kicinski <kuba@kernel.org>
To: Dragos Tatulea <dtatulea@nvidia.com>
Cc: davem@davemloft.net, netdev@vger.kernel.org, edumazet@google.com,
pabeni@redhat.com, andrew+netdev@lunn.ch, horms@kernel.org,
donald.hunter@gmail.com, sdf@fomichev.me, almasrymina@google.com,
dw@davidwei.uk, asml.silence@gmail.com, ap420073@gmail.com,
jdamato@fastly.com, michael.chan@broadcom.com
Subject: Re: [RFC net-next 19/22] eth: bnxt: use queue op config validate
Date: Thu, 12 Jun 2025 07:10:28 -0700 [thread overview]
Message-ID: <20250612071028.4f7c5756@kernel.org> (raw)
In-Reply-To: <5nar53qzx3oyphylkiv727rnny7cdu5qlvgyybl2smopa6krb4@jzdm3jr22zkc>
On Thu, 12 Jun 2025 11:56:26 +0000 Dragos Tatulea wrote:
> For the hypothetical situation when the user configures a larger buffer
> than the ring size * MTU. Should the check happen in validate or should
> the max buffer size be dynamic depending on ring size and MTU?
Hm, why does the ring size come into the calculation?
I don't think it's a practical configuration, so it should be perfectly
fine for the driver to reject it. But in principle if user wants to
configure a 128 entry ring with 1MB buffers.. I guess they must have
a lot of DRAM to waste, but other than that I don't see a reason to
stop them within the core?
Documenting sounds good, just wanna make sure I understand the potential
ambiguity.
next prev parent reply other threads:[~2025-06-12 14:10 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-21 22:28 [RFC net-next 00/22] net: per-queue rx-buf-len configuration Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 01/22] docs: ethtool: document that rx_buf_len must control payload lengths Jakub Kicinski
2025-04-22 16:19 ` David Wei
2025-04-22 19:48 ` Joe Damato
2025-04-23 20:08 ` Mina Almasry
2025-04-25 22:50 ` Jakub Kicinski
2025-04-25 23:20 ` Joe Damato
2025-04-21 22:28 ` [RFC net-next 02/22] net: ethtool: report max value for rx-buf-len Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 03/22] net: use zero value to restore rx_buf_len to default Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 04/22] net: clarify the meaning of netdev_config members Jakub Kicinski
2025-04-22 19:57 ` Joe Damato
2025-04-21 22:28 ` [RFC net-next 05/22] net: add rx_buf_len to netdev config Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 06/22] eth: bnxt: read the page size from the adapter struct Jakub Kicinski
2025-04-23 20:35 ` Mina Almasry
2025-04-25 22:51 ` Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 07/22] eth: bnxt: set page pool page order based on rx_page_size Jakub Kicinski
2025-04-22 15:32 ` Stanislav Fomichev
2025-04-22 15:52 ` Jakub Kicinski
2025-04-22 17:27 ` Stanislav Fomichev
2025-04-21 22:28 ` [RFC net-next 08/22] eth: bnxt: support setting size of agg buffers via ethtool Jakub Kicinski
2025-04-23 21:00 ` Mina Almasry
2025-04-25 22:58 ` Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 09/22] net: move netdev_config manipulation to dedicated helpers Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 10/22] net: reduce indent of struct netdev_queue_mgmt_ops members Jakub Kicinski
2025-04-23 21:04 ` Mina Almasry
2025-04-21 22:28 ` [RFC net-next 11/22] net: allocate per-queue config structs and pass them thru the queue API Jakub Kicinski
2025-04-23 21:17 ` Mina Almasry
2025-04-25 23:24 ` Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 12/22] net: pass extack to netdev_rx_queue_restart() Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 13/22] net: add queue config validation callback Jakub Kicinski
2025-04-22 15:49 ` Stanislav Fomichev
2025-04-22 20:16 ` Joe Damato
2025-04-21 22:28 ` [RFC net-next 14/22] eth: bnxt: always set the queue mgmt ops Jakub Kicinski
2025-04-22 15:50 ` Stanislav Fomichev
2025-04-22 20:18 ` Joe Damato
2025-04-21 22:28 ` [RFC net-next 15/22] eth: bnxt: store the rx buf size per queue Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 16/22] eth: bnxt: adjust the fill level of agg queues with larger buffers Jakub Kicinski
2025-04-22 16:13 ` Stanislav Fomichev
2025-04-21 22:28 ` [RFC net-next 17/22] netdev: add support for setting rx-buf-len per queue Jakub Kicinski
2025-04-22 16:15 ` Stanislav Fomichev
2025-04-25 23:41 ` Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 18/22] net: wipe the setting of deactived queues Jakub Kicinski
2025-04-22 16:21 ` Stanislav Fomichev
2025-04-25 23:42 ` Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 19/22] eth: bnxt: use queue op config validate Jakub Kicinski
2025-04-23 10:00 ` Dragos Tatulea
2025-04-23 13:46 ` Jakub Kicinski
2025-04-23 14:24 ` Dragos Tatulea
2025-04-23 15:33 ` Jakub Kicinski
2025-06-12 11:56 ` Dragos Tatulea
2025-06-12 14:10 ` Jakub Kicinski [this message]
2025-06-12 15:52 ` Dragos Tatulea
2025-06-12 22:30 ` Jakub Kicinski
2025-06-13 19:02 ` Dragos Tatulea
2025-06-13 23:16 ` Jakub Kicinski
2025-06-17 12:36 ` Dragos Tatulea
2025-04-21 22:28 ` [RFC net-next 20/22] eth: bnxt: support per queue configuration of rx-buf-len Jakub Kicinski
2025-04-21 22:28 ` [RFC net-next 21/22] selftests: drv-net: add helper/wrapper for bpftrace Jakub Kicinski
2025-04-22 16:36 ` Stanislav Fomichev
2025-04-22 16:39 ` Stanislav Fomichev
2025-06-25 12:23 ` Breno Leitao
2025-04-21 22:28 ` [RFC net-next 22/22] selftests: drv-net: add test for rx-buf-len Jakub Kicinski
2025-04-22 17:06 ` Stanislav Fomichev
2025-04-25 23:52 ` Jakub Kicinski
2025-04-23 20:02 ` [RFC net-next 00/22] net: per-queue rx-buf-len configuration Mina Almasry
2025-04-25 23:55 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250612071028.4f7c5756@kernel.org \
--to=kuba@kernel.org \
--cc=almasrymina@google.com \
--cc=andrew+netdev@lunn.ch \
--cc=ap420073@gmail.com \
--cc=asml.silence@gmail.com \
--cc=davem@davemloft.net \
--cc=donald.hunter@gmail.com \
--cc=dtatulea@nvidia.com \
--cc=dw@davidwei.uk \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jdamato@fastly.com \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sdf@fomichev.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).