From: Jun Miao <jun.miao@intel.com>
To: sbhatta@marvell.com, kuba@kernel.org, oneukum@suse.com
Cc: netdev@vger.kernel.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, qiang.zhang@linux.dev,
jun.miao@intel.com
Subject: [PATCH v2] net: usb: Convert tasklet API to new bottom half workqueue mechanism
Date: Sat, 14 Jun 2025 19:14:14 +0800 [thread overview]
Message-ID: <20250614111414.2502195-1-jun.miao@intel.com> (raw)
Migrate tasklet APIs to the new bottom half workqueue mechanism. It
replaces all occurrences of tasklet usage with the appropriate workqueue
APIs throughout the usbnet driver. This transition ensures compatibility
with the latest design and enhances performance.
Signed-off-by: Jun Miao <jun.miao@intel.com>
---
v1->v2:
Check patch warning, delete the more spaces.
---
drivers/net/usb/usbnet.c | 36 ++++++++++++++++++------------------
include/linux/usb/usbnet.h | 2 +-
2 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index c04e715a4c2a..566127b4e0ba 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -461,7 +461,7 @@ static enum skb_state defer_bh(struct usbnet *dev, struct sk_buff *skb,
__skb_queue_tail(&dev->done, skb);
if (dev->done.qlen == 1)
- tasklet_schedule(&dev->bh);
+ queue_work(system_bh_wq, &dev->bh_work);
spin_unlock(&dev->done.lock);
spin_unlock_irqrestore(&list->lock, flags);
return old_state;
@@ -549,7 +549,7 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
default:
netif_dbg(dev, rx_err, dev->net,
"rx submit, %d\n", retval);
- tasklet_schedule (&dev->bh);
+ queue_work(system_bh_wq, &dev->bh_work);
break;
case 0:
__usbnet_queue_skb(&dev->rxq, skb, rx_start);
@@ -709,7 +709,7 @@ void usbnet_resume_rx(struct usbnet *dev)
num++;
}
- tasklet_schedule(&dev->bh);
+ queue_work(system_bh_wq, &dev->bh_work);
netif_dbg(dev, rx_status, dev->net,
"paused rx queue disabled, %d skbs requeued\n", num);
@@ -778,7 +778,7 @@ void usbnet_unlink_rx_urbs(struct usbnet *dev)
{
if (netif_running(dev->net)) {
(void) unlink_urbs (dev, &dev->rxq);
- tasklet_schedule(&dev->bh);
+ queue_work(system_bh_wq, &dev->bh_work);
}
}
EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
@@ -861,14 +861,14 @@ int usbnet_stop (struct net_device *net)
/* deferred work (timer, softirq, task) must also stop */
dev->flags = 0;
timer_delete_sync(&dev->delay);
- tasklet_kill(&dev->bh);
+ disable_work_sync(&dev->bh_work);
cancel_work_sync(&dev->kevent);
/* We have cyclic dependencies. Those calls are needed
* to break a cycle. We cannot fall into the gaps because
* we have a flag
*/
- tasklet_kill(&dev->bh);
+ disable_work_sync(&dev->bh_work);
timer_delete_sync(&dev->delay);
cancel_work_sync(&dev->kevent);
@@ -955,7 +955,7 @@ int usbnet_open (struct net_device *net)
clear_bit(EVENT_RX_KILL, &dev->flags);
// delay posting reads until we're fully open
- tasklet_schedule (&dev->bh);
+ queue_work(system_bh_wq, &dev->bh_work);
if (info->manage_power) {
retval = info->manage_power(dev, 1);
if (retval < 0) {
@@ -1123,7 +1123,7 @@ static void __handle_link_change(struct usbnet *dev)
*/
} else {
/* submitting URBs for reading packets */
- tasklet_schedule(&dev->bh);
+ queue_work(system_bh_wq, &dev->bh_work);
}
/* hard_mtu or rx_urb_size may change during link change */
@@ -1198,11 +1198,11 @@ usbnet_deferred_kevent (struct work_struct *work)
} else {
clear_bit (EVENT_RX_HALT, &dev->flags);
if (!usbnet_going_away(dev))
- tasklet_schedule(&dev->bh);
+ queue_work(system_bh_wq, &dev->bh_work);
}
}
- /* tasklet could resubmit itself forever if memory is tight */
+ /* workqueue could resubmit itself forever if memory is tight */
if (test_bit (EVENT_RX_MEMORY, &dev->flags)) {
struct urb *urb = NULL;
int resched = 1;
@@ -1224,7 +1224,7 @@ usbnet_deferred_kevent (struct work_struct *work)
fail_lowmem:
if (resched)
if (!usbnet_going_away(dev))
- tasklet_schedule(&dev->bh);
+ queue_work(system_bh_wq, &dev->bh_work);
}
}
@@ -1325,7 +1325,7 @@ void usbnet_tx_timeout (struct net_device *net, unsigned int txqueue)
struct usbnet *dev = netdev_priv(net);
unlink_urbs (dev, &dev->txq);
- tasklet_schedule (&dev->bh);
+ queue_work(system_bh_wq, &dev->bh_work);
/* this needs to be handled individually because the generic layer
* doesn't know what is sufficient and could not restore private
* information if a remedy of an unconditional reset were used.
@@ -1547,7 +1547,7 @@ static inline void usb_free_skb(struct sk_buff *skb)
/*-------------------------------------------------------------------------*/
-// tasklet (work deferred from completions, in_irq) or timer
+// workqueue (work deferred from completions, in_irq) or timer
static void usbnet_bh (struct timer_list *t)
{
@@ -1601,16 +1601,16 @@ static void usbnet_bh (struct timer_list *t)
"rxqlen %d --> %d\n",
temp, dev->rxq.qlen);
if (dev->rxq.qlen < RX_QLEN(dev))
- tasklet_schedule (&dev->bh);
+ queue_work(system_bh_wq, &dev->bh_work);
}
if (dev->txq.qlen < TX_QLEN (dev))
netif_wake_queue (dev->net);
}
}
-static void usbnet_bh_tasklet(struct tasklet_struct *t)
+static void usbnet_bh_workqueue(struct work_struct *work)
{
- struct usbnet *dev = from_tasklet(dev, t, bh);
+ struct usbnet *dev = from_work(dev, work, bh_work);
usbnet_bh(&dev->delay);
}
@@ -1742,7 +1742,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
skb_queue_head_init (&dev->txq);
skb_queue_head_init (&dev->done);
skb_queue_head_init(&dev->rxq_pause);
- tasklet_setup(&dev->bh, usbnet_bh_tasklet);
+ INIT_WORK(&dev->bh_work, usbnet_bh_workqueue);
INIT_WORK (&dev->kevent, usbnet_deferred_kevent);
init_usb_anchor(&dev->deferred);
timer_setup(&dev->delay, usbnet_bh, 0);
a@@ -1971,7 +1971,7 @@ int usbnet_resume (struct usb_interface *intf)
if (!(dev->txq.qlen >= TX_QLEN(dev)))
netif_tx_wake_all_queues(dev->net);
- tasklet_schedule (&dev->bh);
+ queue_work(system_bh_wq, &dev->bh_work);
}
}
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 0b9f1e598e3a..208682f77179 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -58,7 +58,7 @@ struct usbnet {
unsigned interrupt_count;
struct mutex interrupt_mutex;
struct usb_anchor deferred;
- struct tasklet_struct bh;
+ struct work_struct bh_work;
struct work_struct kevent;
unsigned long flags;
--
2.32.0
next reply other threads:[~2025-06-14 11:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-14 11:14 Jun Miao [this message]
2025-06-14 14:15 ` [PATCH v2] net: usb: Convert tasklet API to new bottom half workqueue mechanism kernel test robot
-- strict thread matches above, loose matches on Subject: below --
2025-06-10 14:54 [PATCH V2] " Jun Miao
2025-06-13 1:51 ` Jakub Kicinski
2025-06-13 9:16 ` Subbaraya Sundeep
2025-06-13 12:33 ` Miao, Jun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250614111414.2502195-1-jun.miao@intel.com \
--to=jun.miao@intel.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=oneukum@suse.com \
--cc=qiang.zhang@linux.dev \
--cc=sbhatta@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).