netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Raju Rangoju <Raju.Rangoju@amd.com>
To: <andrew+netdev@lunn.ch>, <davem@davemloft.net>,
	<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>
Cc: <netdev@vger.kernel.org>, <Shyam-sundar.S-k@amd.com>,
	Raju Rangoju <Raju.Rangoju@amd.com>
Subject: [PATCH net v2] amd-xgbe: do not double read link status
Date: Wed, 25 Jun 2025 15:23:15 +0530	[thread overview]
Message-ID: <20250625095315.232566-1-Raju.Rangoju@amd.com> (raw)

The link status is latched low so that momentary link drops
can be detected. Avoid double-reading the status to identify
short link interruptions, unless the link was already down.

This prevents unnecessary duplicate readings of the link status.

Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
- skip double-read to detect short link drops
- refine the subject line for clarity

 drivers/net/ethernet/amd/xgbe/xgbe-mdio.c   |  4 +++
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 27 +++++++++++++--------
 2 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
index 71449edbb76d..f8a75532b11c 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
@@ -1295,6 +1295,10 @@ static void xgbe_phy_status(struct xgbe_prv_data *pdata)
 
 	pdata->phy.link = pdata->phy_if.phy_impl.link_status(pdata,
 							     &an_restart);
+	/* bail out if the link status register read fails */
+	if (pdata->phy.link < 0)
+		return;
+
 	if (an_restart) {
 		xgbe_phy_config_aneg(pdata);
 		goto adjust_link;
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 7a4dfa4e19c7..94125197738c 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -2746,8 +2746,7 @@ static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed)
 static int xgbe_phy_link_status(struct xgbe_prv_data *pdata, int *an_restart)
 {
 	struct xgbe_phy_data *phy_data = pdata->phy_data;
-	unsigned int reg;
-	int ret;
+	int reg, ret;
 
 	*an_restart = 0;
 
@@ -2780,13 +2779,23 @@ static int xgbe_phy_link_status(struct xgbe_prv_data *pdata, int *an_restart)
 		if (!phy_data->phydev->link)
 			return 0;
 	}
-
-	/* Link status is latched low, so read once to clear
-	 * and then read again to get current state
+	/* Link status is latched low so that momentary link drops
+	 * can be detected. Do not double-read the status to detect
+	 * short link drops except the link was already down.
 	 */
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+	if (!pdata->phy.link) {
+		reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+		if (reg < 0)
+			return reg;
+
+		if (reg & MDIO_STAT1_LSTATUS)
+			goto skip_read;
+	}
 
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+	if (reg < 0)
+		return reg;
+skip_read:
 	if (pdata->en_rx_adap) {
 		/* if the link is available and adaptation is done,
 		 * declare link up
@@ -2804,9 +2813,7 @@ static int xgbe_phy_link_status(struct xgbe_prv_data *pdata, int *an_restart)
 			xgbe_phy_set_mode(pdata, phy_data->cur_mode);
 		}
 
-		/* check again for the link and adaptation status */
-		reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
-		if ((reg & MDIO_STAT1_LSTATUS) && pdata->rx_adapt_done)
+		if (pdata->rx_adapt_done)
 			return 1;
 	} else if (reg & MDIO_STAT1_LSTATUS)
 		return 1;
-- 
2.34.1


             reply	other threads:[~2025-06-25  9:53 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-25  9:53 Raju Rangoju [this message]
2025-07-01  1:12 ` [PATCH net v2] amd-xgbe: do not double read link status Jakub Kicinski
2025-07-01  6:42   ` Rangoju, Raju

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250625095315.232566-1-Raju.Rangoju@amd.com \
    --to=raju.rangoju@amd.com \
    --cc=Shyam-sundar.S-k@amd.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).