From: Michael Dege <michael.dege@renesas.com>
To: "Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>,
"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
"Paul Barker" <paul@pbarker.dev>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>
Cc: netdev@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
Michael Dege <michael.dege@renesas.com>,
Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Subject: [PATCH v2 2/4] net: renesas: rswitch: configure default ageing time
Date: Tue, 08 Jul 2025 11:27:38 +0200 [thread overview]
Message-ID: <20250708-add_l2_switching-v2-2-f91f5556617a@renesas.com> (raw)
In-Reply-To: <20250708-add_l2_switching-v2-0-f91f5556617a@renesas.com>
Enable MAC ageing by setting up the timer and setting the ageging
time to the default of 300s.
Signed-off-by: Michael Dege <michael.dege@renesas.com>
---
drivers/net/ethernet/renesas/rswitch.h | 13 ++++++++++++-
drivers/net/ethernet/renesas/rswitch_main.c | 11 ++++++++++-
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/renesas/rswitch.h b/drivers/net/ethernet/renesas/rswitch.h
index 532192cbca4b520e06a7e35653929d8364f1ccb2..feb62b99bceb50e1d68345ff9eba581f7c38edbe 100644
--- a/drivers/net/ethernet/renesas/rswitch.h
+++ b/drivers/net/ethernet/renesas/rswitch.h
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
/* Renesas Ethernet Switch device driver
*
- * Copyright (C) 2022 Renesas Electronics Corporation
+ * Copyright (C) 2022-2025 Renesas Electronics Corporation
*/
#ifndef __RSWITCH_H__
@@ -826,6 +826,17 @@ enum rswitch_gwca_mode {
#define FWPBFCSDC(j, i) (FWPBFCSDC00 + (i) * 0x10 + (j) * 0x04)
+#define FWMACAGUSPC_MACAGUSP GENMASK(9, 0)
+#define FWMACAGC_MACAGT GENMASK(15, 0)
+#define FWMACAGC_MACAGE BIT(16)
+#define FWMACAGC_MACAGSL BIT(17)
+#define FWMACAGC_MACAGPM BIT(18)
+#define FWMACAGC_MACDES BIT(24)
+#define FWMACAGC_MACAGOG BIT(28)
+#define FWMACAGC_MACDESOG BIT(29)
+
+#define RSW_AGEING_TIME 300
+
/* TOP */
#define TPEMIMC7(queue) (TPEMIMC70 + (queue) * 4)
diff --git a/drivers/net/ethernet/renesas/rswitch_main.c b/drivers/net/ethernet/renesas/rswitch_main.c
index aba772e14555d30891dc74a5a123121dad77e92b..2474271cac7f057fffb472131f5a7a72a0fa9a87 100644
--- a/drivers/net/ethernet/renesas/rswitch_main.c
+++ b/drivers/net/ethernet/renesas/rswitch_main.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/* Renesas Ethernet Switch device driver
*
- * Copyright (C) 2022 Renesas Electronics Corporation
+ * Copyright (C) 2022-2025 Renesas Electronics Corporation
*/
#include <linux/clk.h>
@@ -113,6 +113,7 @@ static void rswitch_fwd_init(struct rswitch_private *priv)
{
u32 all_ports_mask = GENMASK(RSWITCH_NUM_AGENTS - 1, 0);
unsigned int i;
+ u32 reg_val;
/* Start with empty configuration */
for (i = 0; i < RSWITCH_NUM_AGENTS; i++) {
@@ -128,6 +129,14 @@ static void rswitch_fwd_init(struct rswitch_private *priv)
iowrite32(0, priv->addr + FWPBFC(i));
}
+ /* Configure MAC table aging */
+ rswitch_modify(priv->addr, FWMACAGUSPC, FWMACAGUSPC_MACAGUSP,
+ FIELD_PREP(FWMACAGUSPC_MACAGUSP, 0x140));
+
+ reg_val = FIELD_PREP(FWMACAGC_MACAGT, RSW_AGEING_TIME);
+ reg_val |= FWMACAGC_MACAGE | FWMACAGC_MACAGSL;
+ iowrite32(reg_val, priv->addr + FWMACAGC);
+
/* For enabled ETHA ports, setup port based forwarding */
rswitch_for_each_enabled_port(priv, i) {
/* Port based forwarding from port i to GWCA port */
--
2.49.0
next prev parent reply other threads:[~2025-07-08 9:28 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-08 9:27 [PATCH v2 0/4] net: renesas: rswitch: R-Car S4 add HW offloading for layer 2 switching Michael Dege
2025-07-08 9:27 ` [PATCH v2 1/4] net: renesas: rswitch: rename rswitch.c to rswitch_main.c Michael Dege
2025-07-08 21:55 ` Andrew Lunn
2025-07-09 4:51 ` Michael Dege
2025-07-08 9:27 ` Michael Dege [this message]
2025-07-08 21:56 ` [PATCH v2 2/4] net: renesas: rswitch: configure default ageing time Andrew Lunn
2025-07-08 9:27 ` [PATCH v2 3/4] net: renesas: rswitch: add offloading for L2 switching Michael Dege
2025-07-08 10:47 ` Simon Horman
2025-07-08 12:32 ` Michael Dege
2025-07-10 12:36 ` Michael Dege
2025-07-11 10:57 ` Simon Horman
2025-07-08 21:52 ` Andrew Lunn
2025-07-10 12:37 ` Michael Dege
2025-07-08 22:23 ` Andrew Lunn
2025-07-08 9:27 ` [PATCH v2 4/4] net: renesas: rswitch: add modifiable ageing time Michael Dege
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250708-add_l2_switching-v2-2-f91f5556617a@renesas.com \
--to=michael.dege@renesas.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nikita.yoush@cogentembedded.com \
--cc=niklas.soderlund@ragnatech.se \
--cc=pabeni@redhat.com \
--cc=paul@pbarker.dev \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).