From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from NAM10-MW2-obe.outbound.protection.outlook.com (mail-mw2nam10on2082.outbound.protection.outlook.com [40.107.94.82]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C51B12E2EE7; Tue, 15 Jul 2025 13:28:53 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=40.107.94.82 ARC-Seal:i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752586135; cv=fail; b=aoonXz6SmtVo/5O45FI3/aMrryikcjNeKdO2dE0SwWIw7tNF+n6izTwPdiif8n1wKqLK66WuZFeaOLfMMq4NnqPsUSi6rAQUXBZtfLDxbssHYjsIpaDgR9Ug5XgQiMKJU+g0Isap1+BX9ch3Br+i9or0+udUZ02dgCSPI+NoHMQ= ARC-Message-Signature:i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752586135; c=relaxed/simple; bh=VtfoxHCtXyOfvw4ubyb/YAQ4gMUPx/X8vwJT/T+o69o=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: Content-Type:MIME-Version; b=a0bOt+XEZtRAmSw2Vf428LENPLx6VH5fYPYX+AUtCJh7iz69VPKh/kpkuCPJJTvNm+vk+GvALdcy0sdBPlrR3mzI6vt/JMMKVt3eheIicN4V38RqWDJKMXf3DXvsO1E89P5SFTLY47/DvgRhe6ofISltwi8J5UxEk52hvQIJhPs= ARC-Authentication-Results:i=2; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=nvidia.com; spf=fail smtp.mailfrom=nvidia.com; dkim=pass (2048-bit key) header.d=Nvidia.com header.i=@Nvidia.com header.b=C076SPTj; arc=fail smtp.client-ip=40.107.94.82 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=nvidia.com Authentication-Results: smtp.subspace.kernel.org; spf=fail smtp.mailfrom=nvidia.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=Nvidia.com header.i=@Nvidia.com header.b="C076SPTj" ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=okSh2GbziG82NI5a2kxjCa2TYDlfZTwTqFo7O60Tmv4XzDW8hWGcZXG6C5z64w8/VHiYpzNnALnI0ggV/GGGcGlIHjdWR1CZUkvm7wQe9+XvCmVOTukRBwZ7anVUojNMctzfQaMSwAZZO5qrn5jkTX11CsGZJyAMRqxuvbnjLXj7KzAhdppXW8hLQ/dTIs/K52q3a+79/B0RYjEaXNZ1UwdszqkzrJ2DRPEg7IPHFGSnfkjA4mMYBaOBNRjoj7Yll643xWlIhrAoInlUReX0XuH/ZQ/wZtu/hULbpF+NHwjVqqg/kSLN7rG9m8SPhzn4vgq0Q/dZQnI85vhV42inmQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=iESXFwQqVSypFpeVOeXE+hjYnWXEyEWDzkrEiRsf2Ek=; b=RLVVjFvEJfgomgW526vSmHAqjPfCFppYy0AWcyxBcBfLnCJcv8WL2bh6XyHSVWAHuqyBFoG0g0vkJ9b4Pnpp0ru9lHobbV2N9vyJ/w7xAlw+MtQ5PvEUATb14cQJYPJlb7BG2Jh2ZuUQjuYkhD+EGBswAsAiomfmqdUBer9rx/0NlXhMeQMB6pee4u79Sw7d+v4lxYs68Gw37qle9mUO7892kvR7gzenZORBjz9kGBeptUIONqQ72f8Yal0EnOYsknA2V3RCB8pS9Z8kEf5SWU/4kC4DoctoksH8tpKN1QPReud2/oi8tH+VL+gm+1sS/8h3DHxFZYjwnGqosGdIiw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=nvidia.com; dmarc=pass action=none header.from=nvidia.com; dkim=pass header.d=nvidia.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=Nvidia.com; s=selector2; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=iESXFwQqVSypFpeVOeXE+hjYnWXEyEWDzkrEiRsf2Ek=; b=C076SPTj84qoyE9MoeitVEiPsTjSg8fJwwJntmtqwPdSA8amjsDBFcKuclrN2g9Vv8DJm0uN7sy8SsRzQhlmfCTtqe2vu9uJe1uFXGtHKwWHe19xMLPXQMjFRy2YOzfGNpP+cSaO/dfUJGXGEDkYa2i1qrbbYgCD2g4UsMHV98iWKlI7DjDUGkonFJaJ9CTY1NgK9IFAXn/CMHvx5ALtRT0EYdN3Yv5RSclNiiG6cNmmpeeYoKjq/VkwFmUTpjt+kUAXpatceY4tuO5t29t/IBdSF87B81fkACz17RNbqxaFTNQHOJBbSXiZxwaaMMFNqDbcROYrYlKH82G4SWfMWg== Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=nvidia.com; Received: from SJ2PR12MB8943.namprd12.prod.outlook.com (2603:10b6:a03:547::17) by PH7PR12MB8153.namprd12.prod.outlook.com (2603:10b6:510:2b0::17) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.8901.35; Tue, 15 Jul 2025 13:28:49 +0000 Received: from SJ2PR12MB8943.namprd12.prod.outlook.com ([fe80::7577:f32f:798c:87cc]) by SJ2PR12MB8943.namprd12.prod.outlook.com ([fe80::7577:f32f:798c:87cc%4]) with mapi id 15.20.8901.023; Tue, 15 Jul 2025 13:28:49 +0000 From: Aurelien Aptel To: linux-nvme@lists.infradead.org, netdev@vger.kernel.org, sagi@grimberg.me, hch@lst.de, kbusch@kernel.org, axboe@fb.com, chaitanyak@nvidia.com, davem@davemloft.net, kuba@kernel.org Cc: Yoray Zack , aaptel@nvidia.com, aurelien.aptel@gmail.com, smalin@nvidia.com, malin1024@gmail.com, ogerlitz@nvidia.com, borisp@nvidia.com, galshalom@nvidia.com, mgurtovoy@nvidia.com, tariqt@nvidia.com, gus@collabora.com, linux-doc@vger.kernel.org, edumazet@google.com, pabeni@redhat.com, corbet@lwn.net Subject: [PATCH v30 09/20] Documentation: add ULP DDP offload documentation Date: Tue, 15 Jul 2025 13:27:38 +0000 Message-Id: <20250715132750.9619-10-aaptel@nvidia.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20250715132750.9619-1-aaptel@nvidia.com> References: <20250715132750.9619-1-aaptel@nvidia.com> Content-Transfer-Encoding: 8bit Content-Type: text/plain X-ClientProxiedBy: TL2P290CA0030.ISRP290.PROD.OUTLOOK.COM (2603:1096:950:3::16) To SJ2PR12MB8943.namprd12.prod.outlook.com (2603:10b6:a03:547::17) Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SJ2PR12MB8943:EE_|PH7PR12MB8153:EE_ X-MS-Office365-Filtering-Correlation-Id: 0172429d-a584-41cb-8312-08ddc3a388b2 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0;ARA:13230040|1800799024|366016|7416014|376014; X-Microsoft-Antispam-Message-Info: =?us-ascii?Q?MyggODRfRs6bOyE/cuCT2fxeu5r06vJDpkRRIudJqlgmR9mF8Bxmx+AZZWko?= =?us-ascii?Q?h7sx1dHkIgMhmtIXjnaNI74t+vqY2fj3SNOcw2KAtxs5ZyTuQNm5meAj3JIq?= =?us-ascii?Q?oPQONMczua6yFv8TEPh6QdeXfVTtgk849u7UtJPb0GBSpOMnZCbDoXjHqWQ+?= =?us-ascii?Q?R836FM0rHzPNclCMDdbhY9ZkJLl6SAlWsvBrbLtUw1a/VJJa4MbqbZuukZfr?= =?us-ascii?Q?XhI2hQo/zPd0/qPfr0qNowZagyWqWk3aeIjc5gDg0gA/G2cjelEZQendGAjO?= =?us-ascii?Q?kbVwslYDTCpqKxOf1TMFHeqKngJv5vLUTH4AMQYG/W36uAqRtIlxTJlxgDgX?= =?us-ascii?Q?jAYcJSuELpCUVOmGCZ3KArvv+5LO2cxQCwxMRaZb5Sax4GESmxeo10W9CcY2?= =?us-ascii?Q?2EtjEDutDS8Qr7vz0ue2zE7dIe/XCLm7UWEJJNJp6zyLtC41sAkdOqgYk7qr?= =?us-ascii?Q?W0HKTI6hotWUMa+5WbWhW0Uf3cwiREdFUCUs/MaCBRExk5oZFZfoAq9iRcq4?= =?us-ascii?Q?1+AYPqwVHdz8OSPdLXTniQFLoSs8cddlSGyZPgizioON47gm/q4fk3rLYBYK?= =?us-ascii?Q?sCgh81O2L+WdkXtwR7Tza+0pgusks37c2xQ+OoatlSshweT4RPeBcmhWq/nt?= =?us-ascii?Q?ZDAu8oiKccg7lMMy4xRN6ugrEUdG9F3xoN8qsWxOxfngHn2QacLuR8duPNnm?= =?us-ascii?Q?nbFD479byP7ogTW0+KZnTXzwwiVzOoq3sYSqgupXxipn2m0xW91hI/KjeLeo?= =?us-ascii?Q?JpWEINQdOP7qg2mQ1nu76cPa1OszoesA5LVmz9Sv6ypksbh6WKhPRr/tbw4G?= =?us-ascii?Q?loocn1lejr47OLirbc5INZpdWIaZoADB5mkLiso2qQn5GyQN+U9xz16YFWtt?= =?us-ascii?Q?lOsG0UaDnQ/wDYN6z4JHYw9b17vHek5NxiOoTidoyVfLMX/K74aZZggLP2Pb?= =?us-ascii?Q?pR0wbCX+2DBcLnF8TsjmYnRUEoNEqaajLeo8wA1pXMTvrFpcTDfna542oNdg?= =?us-ascii?Q?8WvGwx+ZStsWsP5ImQiX3ccHxzI4YVE283rboO6fdFscBHr5ym+Y7asdiG27?= =?us-ascii?Q?WCeEULf7cAJkJPuGvWh0d9lifQHzvdYwCYkn/4H9R8UyZun1ro3h/SRP9QUL?= =?us-ascii?Q?R9VbOYIzx7steWBHW0n6lCgGEFAXMdtj0jalV9ZOidSvgYK4IhPy2P9MieYW?= =?us-ascii?Q?kdtg41z4FUAAASQtpr+dW3PoRgp2pixzm0WONosLt16nLBtt2VTmXWSVSBJ/?= =?us-ascii?Q?Agr3r7lzCMqMxcZt/d/3nbvbCcalDyYMmr7UboQj6c8UEN4G/Q1qxSD+dq1e?= =?us-ascii?Q?ISs5E7T3gRbH9tXNoMDB+xxgkGlHIdGj7kAPMhTlhJxYBoUp3NS3ir2HsGE7?= =?us-ascii?Q?lCfUX3brWDuPJLhkKveWIaxdTtzfdTdC1j3aRlWfVQZeIKyR117lAiijgApw?= =?us-ascii?Q?Q0wTY3kP43M=3D?= X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:SJ2PR12MB8943.namprd12.prod.outlook.com;PTR:;CAT:NONE;SFS:(13230040)(1800799024)(366016)(7416014)(376014);DIR:OUT;SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: =?us-ascii?Q?W3oDG+cWa++cc5BgOmYoe9MTyzpYRWBtbqR5EAGf5MEqijC/mVjdPKYWzTSF?= =?us-ascii?Q?3+ES+/6+bnJ+qkWgGSbc15AVtAsDe6gY62c+ACg0YYXk+hPjjLog3ZtlgNMJ?= =?us-ascii?Q?l89ikFnhHNHrAT0wTSXsIP4HOdyuskvbPl/MwBOoHx46zJvR9lihHjc2f23T?= =?us-ascii?Q?OAGm/LyrM3XGLehYcXuw6CABr+6EYW4f10xfXaaPZc5LAeRNt6H5G7AKlQS7?= =?us-ascii?Q?Rs3IreEK9eKkgpION341hja6IRGimtN/YqAuiLURkUFjo1q4p2HCofTCecwb?= =?us-ascii?Q?xCJaes/06+cKNF4JC49EP0CjyRiCSesVWn2ZtvDPVZerKdHJoXG6v+Cgmui3?= =?us-ascii?Q?yYuKaTYVstVsMxJ+tI4ryBiRMFLiMAAIVA9gkpXao9EMncjT7qwdPBzfZqyg?= =?us-ascii?Q?h/5RsYf69dWj6IOSvoTpIPWs3Q4ph6bhVk1pHhzPm4rUk9zoTwF4rvvgEHim?= =?us-ascii?Q?bA/zA1T6ONPt23Pd+vGTRJMpBj2eBXi1LWTkmQTdzWUYh4IIIkRpM2+tOc7Y?= =?us-ascii?Q?RY7Wit+BnD90kXY7BXU7ixqiTXwAIVJHAHUmPBbwLBlEjik37IZNi0XVGd2X?= =?us-ascii?Q?DtjZuidQgJ0M0ogZWfLCRymAbG+7ltLHYbLSKoEK70o1c2ASYvKyOPTV81Fl?= =?us-ascii?Q?WfF7X5Sc7GT2v3LKUfaeTLXzM3I3T/C+NUQ56Po5MqD/HqmrBjUsL3GQp/t/?= =?us-ascii?Q?YDBvB3eMNRVhFmXS2e8I5siBrgCmum/Hp70L3W276SD2C36Vd5Os+7hqL2TZ?= =?us-ascii?Q?Eeu0iBLFEvmObcgO/ET721CbDdVUi4OCKpaclPEiAFGTsCDrWGCOJkyMwRTB?= =?us-ascii?Q?cGzscBmNd/B99dCNeVpXgFpfE4H7sfPo1f5pevT3OO1rZCiEmRFnbmhY63IX?= =?us-ascii?Q?3pR5vXNEPggstQYU7Kb1ZZ9jeBRGP3xRtxBB9JjJuPhrzxsacXlpAR3SqM3z?= =?us-ascii?Q?zyW7FLaodOUP6LDpsfBtVRoqaO6IUQsJbsHQebidh1lSQyRwyKD8V/8DKjq7?= =?us-ascii?Q?TLF39LgZfadl0SVqzQx4NfvIAFn9JcyUjjF41utG8S1qG4Vr1NjFaXyyX+DT?= =?us-ascii?Q?5O/IiY16XwOdsx2ovwKbMIemHd43XhPTY34ggMJ4NXadPmu+Nl/fVuMxVvCr?= =?us-ascii?Q?58wX/6JBpYf6vZq8PeT22wXP3nWfJMJsEke8NCGjRhU3w6rjmg5/j0UVOzEW?= =?us-ascii?Q?lUt2PdK49kLe3+EH6YUKiBnsuIUKBQ6ZUDY25E7vK4jR9z4NhVHycR4gLa/M?= =?us-ascii?Q?XsXJolsCptSlBaN9w3OM4OZEtF1lBnSGFPcuYGKFPDJzzUDniNZZAKP1rWle?= =?us-ascii?Q?SAoKEFqpUIMWfpm6EDYFbxKJT2ZY7bomIkIawC/cX1p2kjz7yxstm4QVugKX?= =?us-ascii?Q?So7KDJSJedQ48I4IkKi4rbAc7shn1KSzzr2l9mZ+IlOIqaTI0Hg2GlG0ag25?= =?us-ascii?Q?zjB9IG1xWvzw5b4qr0BKgtxOAGsFf0MRBAH6YBGy5VPulI4AO54wB6LZE6Em?= =?us-ascii?Q?RL9fqj702+bTfdM7Fd+EbrEufX+U7AA2+Trk9wP4KLMtQqYMI38SXOC0kX4i?= =?us-ascii?Q?LRcSxKMEHjGaVSu6+ixSus2jRRFzOL+sUd6v+kwU?= X-OriginatorOrg: Nvidia.com X-MS-Exchange-CrossTenant-Network-Message-Id: 0172429d-a584-41cb-8312-08ddc3a388b2 X-MS-Exchange-CrossTenant-AuthSource: SJ2PR12MB8943.namprd12.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 15 Jul 2025 13:28:49.8501 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 43083d15-7273-40c1-b7db-39efd9ccc17a X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: 6khtDYeoKv3HhG8AgzmXZPFcYSJSnvLLcqFQTlAwq3USG586fFOHxqetjiYZU00nSWxK72cEGJOve4cK8udUbw== X-MS-Exchange-Transport-CrossTenantHeadersStamped: PH7PR12MB8153 From: Yoray Zack Document the new ULP DDP API and add it under "networking". Use NVMe-TCP implementation as an example. Signed-off-by: Boris Pismenny Signed-off-by: Ben Ben-Ishay Signed-off-by: Or Gerlitz Signed-off-by: Yoray Zack Signed-off-by: Shai Malin Signed-off-by: Aurelien Aptel Reviewed-by: Bagas Sanjaya --- Documentation/networking/index.rst | 1 + Documentation/networking/ulp-ddp-offload.rst | 372 +++++++++++++++++++ 2 files changed, 373 insertions(+) create mode 100644 Documentation/networking/ulp-ddp-offload.rst diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index ac90b82f3ce9..41ab7d1f9c0e 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -120,6 +120,7 @@ Contents: tc-queue-filters tcp_ao tcp-thin + ulp-ddp-offload team timestamping tipc diff --git a/Documentation/networking/ulp-ddp-offload.rst b/Documentation/networking/ulp-ddp-offload.rst new file mode 100644 index 000000000000..4133e5094ff5 --- /dev/null +++ b/Documentation/networking/ulp-ddp-offload.rst @@ -0,0 +1,372 @@ +.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +================================= +ULP direct data placement offload +================================= + +Overview +======== + +The Linux kernel ULP direct data placement (DDP) offload infrastructure +provides tagged request-response protocols, such as NVMe-TCP, the ability to +place response data directly in pre-registered buffers according to header +tags. DDP is particularly useful for data-intensive pipelined protocols whose +responses may be reordered. + +For example, in NVMe-TCP numerous read requests are sent together and each +request is tagged using the PDU header CID field. Receiving servers process +requests as fast as possible and sometimes responses for smaller requests +bypasses responses to larger requests, e.g., 4KB reads bypass 1GB reads. +Thereafter, clients correlate responses to requests using PDU header CID tags. +The processing of each response requires copying data from SKBs to read +request destination buffers; The offload avoids this copy. The offload is +oblivious to destination buffers which can reside either in userspace +(O_DIRECT) or in kernel pagecache. + +Request TCP byte-stream: + +.. parsed-literal:: + + +---------------+-------+---------------+-------+---------------+-------+ + | PDU hdr CID=1 | Req 1 | PDU hdr CID=2 | Req 2 | PDU hdr CID=3 | Req 3 | + +---------------+-------+---------------+-------+---------------+-------+ + +Response TCP byte-stream: + +.. parsed-literal:: + + +---------------+--------+---------------+--------+---------------+--------+ + | PDU hdr CID=2 | Resp 2 | PDU hdr CID=3 | Resp 3 | PDU hdr CID=1 | Resp 1 | + +---------------+--------+---------------+--------+---------------+--------+ + +The driver builds SKB page fragments that point to destination buffers. +Consequently, SKBs represent the original data on the wire, which enables +*transparent* inter-operation with the network stack. To avoid copies between +SKBs and destination buffers, the layer-5 protocol (L5P) will check +``if (src == dst)`` for SKB page fragments, success indicates that data is +already placed there by NIC hardware and copy should be skipped. + +In addition, L5P might have DDGST which ensures data integrity over +the network. If not offloaded, ULP DDP might not be efficient as L5P +will need to go over the data and calculate it by itself, cancelling +out the benefits of the DDP copy skip. ULP DDP has support for Rx/Tx +DDGST offload. On the received side the NIC will verify DDGST for +received PDUs and update SKB->ulp_ddp and SKB->ulp_crc bits. If all the SKBs +making up a L5P PDU have crc on, L5P will skip on calculating and +verifying the DDGST for the corresponding PDU. On the Tx side, the NIC +will be responsible for calculating and filling the DDGST fields in +the sent PDUs. + +Offloading does require NIC hardware to track L5P protocol framing, similarly +to RX TLS offload (see Documentation/networking/tls-offload.rst). NIC hardware +will parse PDU headers, extract fields such as operation type, length, tag +identifier, etc. and only offload segments that correspond to tags registered +with the NIC, see the :ref:`buf_reg` section. + +Device configuration +==================== + +During driver initialization the driver sets the ULP DDP operations +for the :c:type:`struct net_device ` via +`netdev->netdev_ops->ulp_ddp_ops`. + +The :c:member:`get_caps` operation returns the ULP DDP capabilities +enabled and/or supported by the device to the caller. The current list +of capabilities is represented as a bitset: + +.. code-block:: c + + enum ulp_ddp_cap { + ULP_DDP_CAP_NVME_TCP, + ULP_DDP_CAP_NVME_TCP_DDGST, + }; + +The enablement of capabilities can be controlled via the +:c:member:`set_caps` operation. This operation is exposed to userspace +via netlink. See Documentation/netlink/specs/ulp_ddp.yaml for more +details. + +Later, after the L5P completes its handshake, the L5P queries the +driver for its runtime limitations via the :c:member:`limits` operation: + +.. code-block:: c + + int (*limits)(struct net_device *netdev, + struct ulp_ddp_limits *lim); + + +All L5P share a common set of limits and parameters (:c:type:`struct ulp_ddp_limits `): + +.. code-block:: c + + /** + * struct ulp_ddp_limits - Generic ulp ddp limits: tcp ddp + * protocol limits. + * Add new instances of ulp_ddp_limits in the union below (nvme-tcp, etc.). + * + * @type: type of this limits struct + * @max_ddp_sgl_len: maximum sgl size supported (zero means no limit) + * @io_threshold: minimum payload size required to offload + * @tls: support for ULP over TLS + * @nvmeotcp: NVMe-TCP specific limits + */ + struct ulp_ddp_limits { + enum ulp_ddp_type type; + int max_ddp_sgl_len; + int io_threshold; + bool tls:1; + union { + /* ... protocol-specific limits ... */ + struct nvme_tcp_ddp_limits nvmeotcp; + }; + }; + +But each L5P can also add protocol-specific limits e.g.: + +.. code-block:: c + + /** + * struct nvme_tcp_ddp_limits - nvme tcp driver limitations + * + * @full_ccid_range: true if the driver supports the full CID range + */ + struct nvme_tcp_ddp_limits { + bool full_ccid_range; + }; + +Once the L5P has made sure the device is supported the offload +operations are installed on the socket. + +If offload installation fails, then the connection is handled by software as if +offload was not attempted. + +To request offload for a socket `sk`, the L5P calls :c:member:`sk_add`: + +.. code-block:: c + + int (*sk_add)(struct net_device *netdev, + struct sock *sk, + struct ulp_ddp_config *config); + +The function return 0 for success. In case of failure, L5P software should +fallback to normal non-offloaded operations. The `config` parameter indicates +the L5P type and any metadata relevant for that protocol. For example, in +NVMe-TCP the following config is used: + +.. code-block:: c + + /** + * struct nvme_tcp_ddp_config - nvme tcp ddp configuration for an IO queue + * + * @pfv: pdu version (e.g., NVME_TCP_PFV_1_0) + * @cpda: controller pdu data alignment (dwords, 0's based) + * @dgst: digest types enabled. + * The netdev will offload crc if L5P data digest is supported. + * @queue_size: number of nvme-tcp IO queue elements + */ + struct nvme_tcp_ddp_config { + u16 pfv; + u8 cpda; + u8 dgst; + int queue_size; + }; + +When offload is not needed anymore, e.g. when the socket is being released, the L5P +calls :c:member:`sk_del` to release device contexts: + +.. code-block:: c + + void (*sk_del)(struct net_device *netdev, + struct sock *sk); + +Normal operation +================ + +At the very least, the device maintains the following state for each connection: + + * 5-tuple + * expected TCP sequence number + * mapping between tags and corresponding buffers + * current offset within PDU, PDU length, current PDU tag + +NICs should not assume any correlation between PDUs and TCP packets. +If TCP packets arrive in-order, offload will place PDU payloads +directly inside corresponding registered buffers. NIC offload should +not delay packets. If offload is not possible, than the packet is +passed as-is to software. To perform offload on incoming packets +without buffering packets in the NIC, the NIC stores some inter-packet +state, such as partial PDU headers. + +RX data-path +------------ + +After the device validates TCP checksums, it can perform DDP offload. The +packet is steered to the DDP offload context according to the 5-tuple. +Thereafter, the expected TCP sequence number is checked against the packet +TCP sequence number. If there is a match, offload is performed: the PDU payload +is DMA written to the corresponding destination buffer according to the PDU header +tag. The data should be DMAed only once, and the NIC receive ring will only +store the remaining TCP and PDU headers. + +We remark that a single TCP packet may have numerous PDUs embedded inside. NICs +can choose to offload one or more of these PDUs according to various +trade-offs. Possibly, offloading such small PDUs is of little value, and it is +better to leave it to software. + +Upon receiving a DDP offloaded packet, the driver reconstructs the original SKB +using page frags, while pointing to the destination buffers whenever possible. +This method enables seamless integration with the network stack, which can +inspect and modify packet fields transparently to the offload. + +.. _buf_reg: + +Destination buffer registration +------------------------------- + +To register the mapping between tags and destination buffers for a socket +`sk`, the L5P calls :c:member:`setup` of :c:type:`struct ulp_ddp_dev_ops +`: + +.. code-block:: c + + int (*setup)(struct net_device *netdev, + struct sock *sk, + struct ulp_ddp_io *io); + + +The `io` provides the buffer via scatter-gather list (`sg_table`) and +corresponding tag (`command_id`): + +.. code-block:: c + + /** + * struct ulp_ddp_io - tcp ddp configuration for an IO request. + * + * @command_id: identifier on the wire associated with these buffers + * @nents: number of entries in the sg_table + * @sg_table: describing the buffers for this IO request + * @first_sgl: first SGL in sg_table + */ + struct ulp_ddp_io { + u32 command_id; + int nents; + struct sg_table sg_table; + struct scatterlist first_sgl[SG_CHUNK_SIZE]; + }; + +After the buffers have been consumed by the L5P, to release the NIC mapping of +buffers the L5P calls :c:member:`teardown` of :c:type:`struct +ulp_ddp_dev_ops `: + +.. code-block:: c + + void (*teardown)(struct net_device *netdev, + struct sock *sk, + struct ulp_ddp_io *io, + void *ddp_ctx); + +`teardown` receives the same `io` context and an additional opaque +`ddp_ctx` that is used for asynchronous teardown, see the :ref:`async_release` +section. + +.. _async_release: + +Asynchronous teardown +--------------------- + +To teardown the association between tags and buffers and allow tag reuse NIC HW +is called by the NIC driver during `teardown`. This operation may be +performed either synchronously or asynchronously. In asynchronous teardown, +`teardown` returns immediately without unmapping NIC HW buffers. Later, +when the unmapping completes by NIC HW, the NIC driver will call up to L5P +using :c:member:`ddp_teardown_done` of :c:type:`struct ulp_ddp_ulp_ops `: + +.. code-block:: c + + void (*ddp_teardown_done)(void *ddp_ctx); + +The `ddp_ctx` parameter passed in `ddp_teardown_done` is the same on provided +in `teardown` and it is used to carry some context about the buffers +and tags that are released. + +Resync handling +=============== + +RX +-- +In presence of packet drops or network packet reordering, the device may lose +synchronization between the TCP stream and the L5P framing, and require a +resync with the kernel's TCP stack. When the device is out of sync, no offload +takes place, and packets are passed as-is to software. Resync is very similar +to TLS offload (see documentation at Documentation/networking/tls-offload.rst) + +If only packets with L5P data are lost or reordered, then resynchronization may +be avoided by NIC HW that keeps tracking PDU headers. If, however, PDU headers +are reordered, then resynchronization is necessary. + +To resynchronize hardware during traffic, we use a handshake between hardware +and software. The NIC HW searches for a sequence of bytes that identifies L5P +headers (i.e., magic pattern). For example, in NVMe-TCP, the PDU operation +type can be used for this purpose. Using the PDU header length field, the NIC +HW will continue to find and match magic patterns in subsequent PDU headers. If +the pattern is missing in an expected position, then searching for the pattern +starts anew. + +The NIC will not resume offload when the magic pattern is first identified. +Instead, it will request L5P software to confirm that indeed this is a PDU +header. To request confirmation the NIC driver calls up to L5P using +:c:member:`resync_request` of :c:type:`struct ulp_ddp_ulp_ops `: + +.. code-block:: c + + bool (*resync_request)(struct sock *sk, u32 seq, u32 flags); + +The `seq` parameter contains the TCP sequence of the last byte in the PDU header. +The `flags` parameter contains a flag (`ULP_DDP_RESYNC_PENDING`) indicating whether +a request is pending or not. +L5P software will respond to this request after observing the packet containing +TCP sequence `seq` in-order. If the PDU header is indeed there, then L5P +software calls the NIC driver using the :c:member:`resync` function of +the :c:type:`struct ulp_ddp_dev_ops ` inside the :c:type:`struct +net_device ` while passing the same `seq` to confirm it is a PDU +header. + +.. code-block:: c + + void (*resync)(struct net_device *netdev, + struct sock *sk, u32 seq); + +Statistics +========== + +Per L5P protocol, the NIC driver must report statistics for the above +netdevice operations and packets processed by offload. +These statistics are per-device and can be retrieved from userspace +via netlink (see Documentation/netlink/specs/ulp_ddp.yaml). + +For example, NVMe-TCP offload reports: + + * ``rx_nvme_tcp_sk_add`` - number of NVMe-TCP Rx offload contexts created. + * ``rx_nvme_tcp_sk_add_fail`` - number of NVMe-TCP Rx offload context creation + failures. + * ``rx_nvme_tcp_sk_del`` - number of NVMe-TCP Rx offload contexts destroyed. + * ``rx_nvme_tcp_setup`` - number of DDP buffers mapped. + * ``rx_nvme_tcp_setup_fail`` - number of DDP buffers mapping that failed. + * ``rx_nvme_tcp_teardown`` - number of DDP buffers unmapped. + * ``rx_nvme_tcp_drop`` - number of packets dropped in the driver due to fatal + errors. + * ``rx_nvme_tcp_resync`` - number of packets with resync requests. + * ``rx_nvme_tcp_packets`` - number of packets that used offload. + * ``rx_nvme_tcp_bytes`` - number of bytes placed in DDP buffers. + +NIC requirements +================ + +NIC hardware should meet the following requirements to provide this offload: + + * Offload must never buffer TCP packets. + * Offload must never modify TCP packet headers. + * Offload must never reorder TCP packets within a flow. + * Offload must never drop TCP packets. + * Offload must not depend on any TCP fields beyond the + 5-tuple and TCP sequence number. -- 2.34.1