From: Mohsin Bashir <mohsin.bashr@gmail.com>
To: netdev@vger.kernel.org
Cc: kuba@kernel.org, alexanderduyck@fb.com, andrew+netdev@lunn.ch,
davem@davemloft.net, edumazet@google.com, pabeni@redhat.com,
mohsin.bashr@gmail.com, horms@kernel.org,
vadim.fedorenko@linux.dev, jdamato@fastly.com, sdf@fomichev.me,
aleksander.lobakin@intel.com, ast@kernel.org,
daniel@iogearbox.net, hawk@kernel.org, john.fastabend@gmail.com
Subject: [PATCH net-next 1/9] eth: fbnic: Add support for HDS configuration
Date: Wed, 23 Jul 2025 07:59:18 -0700 [thread overview]
Message-ID: <20250723145926.4120434-2-mohsin.bashr@gmail.com> (raw)
In-Reply-To: <20250723145926.4120434-1-mohsin.bashr@gmail.com>
Add support for configuring the header data split threshold.
For fbnic, the tcp data split support is enabled all the time.
Fbnic supports a maximum buffer size of 4KB. However, the reservation
for the headroom, tailroom, and padding reduce the max header size
accordingly.
ethtool_hds -g eth0
Ring parameters for eth0:
Pre-set maximums:
...
HDS thresh: 3584
Current hardware settings:
...
HDS thresh: 1536
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
---
.../net/ethernet/meta/fbnic/fbnic_ethtool.c | 21 ++++++++++++++++---
.../net/ethernet/meta/fbnic/fbnic_netdev.c | 4 ++++
.../net/ethernet/meta/fbnic/fbnic_netdev.h | 2 ++
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c | 2 +-
drivers/net/ethernet/meta/fbnic/fbnic_txrx.h | 6 +++++-
5 files changed, 30 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_ethtool.c b/drivers/net/ethernet/meta/fbnic/fbnic_ethtool.c
index 588da02d6e22..84a0db9f1be0 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_ethtool.c
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_ethtool.c
@@ -2,6 +2,7 @@
/* Copyright (c) Meta Platforms, Inc. and affiliates. */
#include <linux/ethtool.h>
+#include <linux/ethtool_netlink.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <net/ipv6.h>
@@ -160,6 +161,7 @@ static void fbnic_clone_swap_cfg(struct fbnic_net *orig,
swap(clone->num_rx_queues, orig->num_rx_queues);
swap(clone->num_tx_queues, orig->num_tx_queues);
swap(clone->num_napi, orig->num_napi);
+ swap(clone->hds_thresh, orig->hds_thresh);
}
static void fbnic_aggregate_vector_counters(struct fbnic_net *fbn,
@@ -277,15 +279,21 @@ fbnic_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring,
ring->rx_mini_pending = fbn->hpq_size;
ring->rx_jumbo_pending = fbn->ppq_size;
ring->tx_pending = fbn->txq_size;
+
+ kernel_ring->tcp_data_split = ETHTOOL_TCP_DATA_SPLIT_ENABLED;
+ kernel_ring->hds_thresh_max = FBNIC_HDS_THRESH_MAX;
+ kernel_ring->hds_thresh = fbn->hds_thresh;
}
static void fbnic_set_rings(struct fbnic_net *fbn,
- struct ethtool_ringparam *ring)
+ struct ethtool_ringparam *ring,
+ struct kernel_ethtool_ringparam *kernel_ring)
{
fbn->rcq_size = ring->rx_pending;
fbn->hpq_size = ring->rx_mini_pending;
fbn->ppq_size = ring->rx_jumbo_pending;
fbn->txq_size = ring->tx_pending;
+ fbn->hds_thresh = kernel_ring->hds_thresh;
}
static int
@@ -316,8 +324,13 @@ fbnic_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring,
return -EINVAL;
}
+ if (kernel_ring->tcp_data_split == ETHTOOL_TCP_DATA_SPLIT_DISABLED) {
+ NL_SET_ERR_MSG_MOD(extack, "Cannot disable TCP data split");
+ return -EINVAL;
+ }
+
if (!netif_running(netdev)) {
- fbnic_set_rings(fbn, ring);
+ fbnic_set_rings(fbn, ring, kernel_ring);
return 0;
}
@@ -325,7 +338,7 @@ fbnic_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring,
if (!clone)
return -ENOMEM;
- fbnic_set_rings(clone, ring);
+ fbnic_set_rings(clone, ring, kernel_ring);
err = fbnic_alloc_napi_vectors(clone);
if (err)
@@ -1678,6 +1691,8 @@ fbnic_get_rmon_stats(struct net_device *netdev,
static const struct ethtool_ops fbnic_ethtool_ops = {
.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
ETHTOOL_COALESCE_RX_MAX_FRAMES,
+ .supported_ring_params = ETHTOOL_RING_USE_TCP_DATA_SPLIT |
+ ETHTOOL_RING_USE_HDS_THRS,
.rxfh_max_num_contexts = FBNIC_RPC_RSS_TBL_COUNT,
.get_drvinfo = fbnic_get_drvinfo,
.get_regs_len = fbnic_get_regs_len,
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_netdev.c b/drivers/net/ethernet/meta/fbnic/fbnic_netdev.c
index 7bd7812d9c06..d039e1c7a0d5 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_netdev.c
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_netdev.c
@@ -691,6 +691,10 @@ struct net_device *fbnic_netdev_alloc(struct fbnic_dev *fbd)
fbn->rx_usecs = FBNIC_RX_USECS_DEFAULT;
fbn->rx_max_frames = FBNIC_RX_FRAMES_DEFAULT;
+ /* Initialize the hds_thresh */
+ netdev->cfg->hds_thresh = FBNIC_HDS_THRESH_DEFAULT;
+ fbn->hds_thresh = FBNIC_HDS_THRESH_DEFAULT;
+
default_queues = netif_get_num_default_rss_queues();
if (default_queues > fbd->max_num_queues)
default_queues = fbd->max_num_queues;
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_netdev.h b/drivers/net/ethernet/meta/fbnic/fbnic_netdev.h
index 86576ae04262..04c5c7ed6c3a 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_netdev.h
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_netdev.h
@@ -31,6 +31,8 @@ struct fbnic_net {
u32 ppq_size;
u32 rcq_size;
+ u32 hds_thresh;
+
u16 rx_usecs;
u16 tx_usecs;
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_txrx.c b/drivers/net/ethernet/meta/fbnic/fbnic_txrx.c
index ac11389a764c..1fc7bd19e7a1 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_txrx.c
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_txrx.c
@@ -2238,7 +2238,7 @@ static void fbnic_enable_rcq(struct fbnic_napi_vector *nv,
rcq_ctl = FIELD_PREP(FBNIC_QUEUE_RDE_CTL1_PADLEN_MASK, FBNIC_RX_PAD) |
FIELD_PREP(FBNIC_QUEUE_RDE_CTL1_MAX_HDR_MASK,
- FBNIC_RX_MAX_HDR) |
+ fbn->hds_thresh) |
FIELD_PREP(FBNIC_QUEUE_RDE_CTL1_PAYLD_OFF_MASK,
FBNIC_RX_PAYLD_OFFSET) |
FIELD_PREP(FBNIC_QUEUE_RDE_CTL1_PAYLD_PG_CL_MASK,
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_txrx.h b/drivers/net/ethernet/meta/fbnic/fbnic_txrx.h
index 2e361d6f03ff..4d248f94ec9b 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_txrx.h
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_txrx.h
@@ -53,7 +53,6 @@ struct fbnic_net;
#define FBNIC_RX_HROOM \
(ALIGN(FBNIC_RX_TROOM + NET_SKB_PAD, 128) - FBNIC_RX_TROOM)
#define FBNIC_RX_PAD 0
-#define FBNIC_RX_MAX_HDR (1536 - FBNIC_RX_PAD)
#define FBNIC_RX_PAYLD_OFFSET 0
#define FBNIC_RX_PAYLD_PG_CL 0
@@ -61,6 +60,11 @@ struct fbnic_net;
#define FBNIC_RING_F_CTX BIT(1)
#define FBNIC_RING_F_STATS BIT(2) /* Ring's stats may be used */
+#define FBNIC_HDS_THRESH_MAX \
+ (4096 - FBNIC_RX_HROOM - FBNIC_RX_TROOM - FBNIC_RX_PAD)
+#define FBNIC_HDS_THRESH_DEFAULT \
+ (1536 - FBNIC_RX_PAD)
+
struct fbnic_pkt_buff {
struct xdp_buff buff;
ktime_t hwtstamp;
--
2.47.1
next prev parent reply other threads:[~2025-07-23 15:00 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-23 14:59 [PATCH net-next 0/9] eth: fbnic Add XDP support for fbnic Mohsin Bashir
2025-07-23 14:59 ` Mohsin Bashir [this message]
2025-07-23 14:59 ` [PATCH net-next 2/9] eth: fbnic: Update Headroom Mohsin Bashir
2025-07-23 14:59 ` [PATCH net-next 3/9] eth: fbnic: Use shinfo to track frags state on Rx Mohsin Bashir
2025-07-23 14:59 ` [PATCH net-next 4/9] eth: fbnic: Prefetch packet headers " Mohsin Bashir
2025-07-23 14:59 ` [PATCH net-next 5/9] eth: fbnic: Add XDP pass, drop, abort support Mohsin Bashir
2025-07-23 17:35 ` Maciej Fijalkowski
2025-07-24 15:47 ` Mohsin Bashir
2025-07-24 16:51 ` Jakub Kicinski
2025-07-24 21:14 ` Alexander H Duyck
2025-07-25 9:56 ` Maciej Fijalkowski
2025-07-25 15:10 ` Alexander Duyck
2025-08-07 21:24 ` Mohsin Bashir
2025-07-23 14:59 ` [PATCH net-next 6/9] eth: fbnic: Add support for XDP queues Mohsin Bashir
2025-07-23 23:54 ` Jakub Kicinski
2025-07-23 14:59 ` [PATCH net-next 7/9] eth: fbnic: Add support for XDP_TX action Mohsin Bashir
2025-07-23 14:59 ` [PATCH net-next 8/9] eth: fbnic: Collect packet statistics for XDP Mohsin Bashir
2025-07-24 10:18 ` Simon Horman
2025-07-24 15:48 ` Mohsin Bashir
2025-07-23 14:59 ` [PATCH net-next 9/9] eth: fbnic: Report XDP stats via ethtool Mohsin Bashir
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250723145926.4120434-2-mohsin.bashr@gmail.com \
--to=mohsin.bashr@gmail.com \
--cc=aleksander.lobakin@intel.com \
--cc=alexanderduyck@fb.com \
--cc=andrew+netdev@lunn.ch \
--cc=ast@kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hawk@kernel.org \
--cc=horms@kernel.org \
--cc=jdamato@fastly.com \
--cc=john.fastabend@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sdf@fomichev.me \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).