[PATCH net 0/2] bonding: fix negotiation flapping in 802.3ad passive mode

[Hangbin Liu <liuhangbin@gmail.com>]

This patch fixes unstable LACP negotiation when bonding is configured in
passive mode (`lacp_active=off`).

Previously, the actor would stop sending LACPDUs after initial negotiation
succeeded, leading to the partner timing out and restarting the negotiation
cycle. This resulted in continuous LACP state flapping.

The fix ensures the passive actor starts sending periodic LACPDUs after
receiving the first LACPDU from the partner, in accordance with IEEE
802.1AX-2020 section 6.4.1.

Out of topic:
Although this patch addresses a functional bug and could be considered for
`net`, I'm slightly concerned about potential regressions, as it changes
the current bonding LACP protocol behavior.

It might be safer to merge this through `net-next` first to allow broader
testing. Thoughts?

Hangbin Liu (2):
  bonding: send LACPDUs periodically in passive mode after receiving
    partner's LACPDU
  selftests: bonding: add test for passive LACP mode

 drivers/net/bonding/bond_3ad.c                | 72 ++++++++++----
 drivers/net/bonding/bond_options.c            |  1 +
 include/net/bond_3ad.h                        |  1 +
 .../selftests/drivers/net/bonding/Makefile    |  3 +-
 .../drivers/net/bonding/bond_passive_lacp.sh  | 93 +++++++++++++++++++
 5 files changed, 151 insertions(+), 19 deletions(-)
 create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_passive_lacp.sh

-- 
2.46.0