From: Jimmy Assarsson <extja@kvaser.com>
To: linux-can@vger.kernel.org
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
Simon Horman <horms@kernel.org>,
netdev@vger.kernel.org
Subject: [PATCH v4 04/10] can: kvaser_pciefd: Store the different firmware version components in a struct
Date: Fri, 25 Jul 2025 14:32:24 +0200 [thread overview]
Message-ID: <20250725123230.8-5-extja@kvaser.com> (raw)
In-Reply-To: <20250725123230.8-1-extja@kvaser.com>
Store firmware version in kvaser_pciefd_fw_version struct, specifying the
different components of the version number.
And drop debug prinout of firmware version, since later patches will expose
it via the devlink interface.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
---
Changes in v4:
- Add tag Reviewed-by Vincent Mailhol
Changes in v2:
- Drop debug prinout, since it will be exposed via devlink.
Suggested by Vincent Mailhol [1]
[1] https://lore.kernel.org/linux-can/20250723083236.9-1-extja@kvaser.com/T/#m2003548deedfeafee5c57ee2e2f610d364220fae
drivers/net/can/kvaser_pciefd.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c
index 4bdb1132ecf9..7153b9ea0d3d 100644
--- a/drivers/net/can/kvaser_pciefd.c
+++ b/drivers/net/can/kvaser_pciefd.c
@@ -325,6 +325,12 @@ struct kvaser_pciefd_driver_data {
const struct kvaser_pciefd_dev_ops *ops;
};
+struct kvaser_pciefd_fw_version {
+ u8 major;
+ u8 minor;
+ u16 build;
+};
+
static const struct kvaser_pciefd_address_offset kvaser_pciefd_altera_address_offset = {
.serdes = 0x1000,
.pci_ien = 0x50,
@@ -437,6 +443,7 @@ struct kvaser_pciefd {
u32 bus_freq;
u32 freq;
u32 freq_to_ticks_div;
+ struct kvaser_pciefd_fw_version fw_version;
};
struct kvaser_pciefd_rx_packet {
@@ -1205,14 +1212,12 @@ static int kvaser_pciefd_setup_board(struct kvaser_pciefd *pcie)
u32 version, srb_status, build;
version = ioread32(KVASER_PCIEFD_SYSID_ADDR(pcie) + KVASER_PCIEFD_SYSID_VERSION_REG);
+ build = ioread32(KVASER_PCIEFD_SYSID_ADDR(pcie) + KVASER_PCIEFD_SYSID_BUILD_REG);
pcie->nr_channels = min(KVASER_PCIEFD_MAX_CAN_CHANNELS,
FIELD_GET(KVASER_PCIEFD_SYSID_VERSION_NR_CHAN_MASK, version));
-
- build = ioread32(KVASER_PCIEFD_SYSID_ADDR(pcie) + KVASER_PCIEFD_SYSID_BUILD_REG);
- dev_dbg(&pcie->pci->dev, "Version %lu.%lu.%lu\n",
- FIELD_GET(KVASER_PCIEFD_SYSID_VERSION_MAJOR_MASK, version),
- FIELD_GET(KVASER_PCIEFD_SYSID_VERSION_MINOR_MASK, version),
- FIELD_GET(KVASER_PCIEFD_SYSID_BUILD_SEQ_MASK, build));
+ pcie->fw_version.major = FIELD_GET(KVASER_PCIEFD_SYSID_VERSION_MAJOR_MASK, version);
+ pcie->fw_version.minor = FIELD_GET(KVASER_PCIEFD_SYSID_VERSION_MINOR_MASK, version);
+ pcie->fw_version.build = FIELD_GET(KVASER_PCIEFD_SYSID_BUILD_SEQ_MASK, build);
srb_status = ioread32(KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_STAT_REG);
if (!(srb_status & KVASER_PCIEFD_SRB_STAT_DMA)) {
--
2.49.0
next prev parent reply other threads:[~2025-07-25 12:32 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-25 12:32 [PATCH v4 00/10] can: kvaser_pciefd: Simplify identification of physical CAN interfaces Jimmy Assarsson
2025-07-25 12:32 ` [PATCH v4 01/10] can: kvaser_pciefd: Add support to control CAN LEDs on device Jimmy Assarsson
2025-07-25 12:32 ` [PATCH v4 02/10] can: kvaser_pciefd: Add support for ethtool set_phys_id() Jimmy Assarsson
2025-07-25 12:32 ` [PATCH v4 03/10] can: kvaser_pciefd: Add intermediate variable for device struct in probe() Jimmy Assarsson
2025-07-25 12:32 ` Jimmy Assarsson [this message]
2025-07-25 12:32 ` [PATCH v4 05/10] can: kvaser_pciefd: Store device channel index Jimmy Assarsson
2025-07-25 12:32 ` [PATCH v4 06/10] can: kvaser_pciefd: Split driver into C-file and header-file Jimmy Assarsson
2025-07-25 12:32 ` [PATCH v4 07/10] can: kvaser_pciefd: Add devlink support Jimmy Assarsson
2025-07-25 12:47 ` Marc Kleine-Budde
2025-07-25 13:50 ` Jimmy Assarsson
2025-07-25 16:16 ` Marc Kleine-Budde
2025-07-25 12:32 ` [PATCH v4 08/10] can: kvaser_pciefd: Expose device firmware version via devlink info_get() Jimmy Assarsson
2025-07-25 12:32 ` [PATCH v4 09/10] can: kvaser_pciefd: Add devlink port support Jimmy Assarsson
2025-07-25 12:32 ` [PATCH v4 10/10] Documentation: devlink: add devlink documentation for the kvaser_pciefd driver Jimmy Assarsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250725123230.8-5-extja@kvaser.com \
--to=extja@kvaser.com \
--cc=horms@kernel.org \
--cc=jimmyassarsson@gmail.com \
--cc=linux-can@vger.kernel.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox