From: Hangbin Liu <liuhangbin@gmail.com>
To: netdev@vger.kernel.org
Cc: Jay Vosburgh <jv@jvosburgh.net>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Nikolay Aleksandrov <razor@blackwall.org>,
Simon Horman <horms@kernel.org>, Shuah Khan <shuah@kernel.org>,
linux-kselftest@vger.kernel.org,
Hangbin Liu <liuhangbin@gmail.com>
Subject: [PATCH net 2/2] selftests: bonding: add fail_over_mac testing
Date: Wed, 20 Aug 2025 09:10:09 +0000 [thread overview]
Message-ID: <20250820091009.393785-2-liuhangbin@gmail.com> (raw)
In-Reply-To: <20250820091009.393785-1-liuhangbin@gmail.com>
Add a test to check each value of bond fail_over_mac option.
Also fix a minor garp_test print issue.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
.../drivers/net/bonding/bond_options.sh | 139 +++++++++++++++++-
.../drivers/net/bonding/bond_topo_2d1c.sh | 3 +
.../drivers/net/bonding/bond_topo_3d1c.sh | 2 +
3 files changed, 142 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh
index 7bc148889ca7..e3f3cc803b56 100755
--- a/tools/testing/selftests/drivers/net/bonding/bond_options.sh
+++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh
@@ -7,6 +7,7 @@ ALL_TESTS="
prio
arp_validate
num_grat_arp
+ fail_over_mac
"
lib_dir=$(dirname "$0")
@@ -352,8 +353,8 @@ garp_test()
exp_num=$(echo "${param}" | cut -f6 -d ' ')
active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
- slowwait_for_counter $((exp_num + 5)) $exp_num \
- tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}"
+ slowwait_for_counter $((exp_num + 5)) $exp_num tc_rule_handle_stats_get \
+ "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}" &> /dev/null
# check result
real_num=$(tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}")
@@ -376,6 +377,140 @@ num_grat_arp()
done
}
+check_all_mac_same()
+{
+ RET=0
+ # all slaves should have same mac address (with the first port's mac)
+ local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]')
+ local eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]')
+ local eth1_mac=$(ip -n "$s_ns" -j link show eth1 | jq -r '.[]["address"]')
+ local eth2_mac=$(ip -n "$s_ns" -j link show eth2 | jq -r '.[]["address"]')
+ if [ "$bond_mac" != "${mac[0]}" ] || [ "$eth0_mac" != "$bond_mac" ] || \
+ [ "$eth1_mac" != "$bond_mac" ] || [ "$eth2_mac" != "$bond_mac" ]; then
+ RET=1
+ fi
+}
+
+check_bond_mac_same_with_first()
+{
+ RET=0
+ # bond mac address should be same with the first added slave
+ local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]')
+ if [ "$bond_mac" != "${mac[0]}" ]; then
+ RET=1
+ fi
+}
+
+check_bond_mac_same_with_active()
+{
+ RET=0
+ # bond mac address should be same with active slave
+ local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]')
+ local active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
+ local active_slave_mac=$(ip -n "$s_ns" -j link show "$active_slave" | jq -r '.[]["address"]')
+ if [ "$bond_mac" != "$active_slave_mac" ]; then
+ RET=1
+ fi
+}
+
+check_backup_slave_mac_not_change()
+{
+ RET=0
+ # backup slave's mac address is not changed
+ if ip -n "$s_ns" -d -j link show type bond_slave | jq -e '.[]
+ | select(.linkinfo.info_slave_data.state=="BACKUP")
+ | select(.address != .linkinfo.info_slave_data.perm_hwaddr)' &> /dev/null; then
+ RET=1
+ fi
+}
+
+check_backup_slave_mac_inherit()
+{
+ local backup_mac
+ RET=0
+
+ # backup slaves should use mac[1] or mac[2]
+ local backup_macs=$(ip -n "$s_ns" -d -j link show type bond_slave | \
+ jq -r '.[] | select(.linkinfo.info_slave_data.state=="BACKUP") | .address')
+ for backup_mac in $backup_macs; do
+ if [ "$backup_mac" != "${mac[1]}" ] && [ "$backup_mac" != "${mac[2]}" ]; then
+ RET=1
+ fi
+ done
+}
+
+check_first_slave_random_mac()
+{
+ RET=0
+ # remove the first added slave and added it back
+ ip -n "$s_ns" link set eth0 nomaster
+ ip -n "$s_ns" link set eth0 master bond0
+
+ # the first slave should use random mac address
+ eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]')
+ [ "$eth0_mac" = "${mac[0]}" ] && RET=1
+ log_test "bond fail_over_mac follow" "random first slave mac"
+
+ # remove the first slave, the permanent MAC address should be restored back
+ ip -n "$s_ns" link set eth0 nomaster
+ eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]')
+ [ "$eth0_mac" != "${mac[0]}" ] && RET=1
+}
+
+do_active_backup_failover()
+{
+ local active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
+ ip -n ${s_ns} link set ${active_slave} down
+ slowwait 2 active_slave_changed $active_slave
+ ip -n ${s_ns} link set ${active_slave} up
+}
+
+fail_over_mac()
+{
+ # Bring down the first interface on the switch to force the bond to
+ # select another active interface instead of the first one that joined.
+ ip -n "$g_ns" link set s0 down
+
+ # fail_over_mac none
+ bond_reset "mode active-backup miimon 100 fail_over_mac 0"
+ check_all_mac_same
+ log_test "fail_over_mac 0" "all slaves have same mac"
+ do_active_backup_failover
+ check_all_mac_same
+ log_test "fail_over_mac 0" "failover: all slaves have same mac"
+
+ # fail_over_mac active
+ bond_reset "mode active-backup miimon 100 fail_over_mac 1"
+ check_bond_mac_same_with_active
+ log_test "fail_over_mac 1" "bond mac is same with active slave mac"
+ check_backup_slave_mac_not_change
+ log_test "fail_over_mac 1" "backup slave mac is not changed"
+ do_active_backup_failover
+ check_bond_mac_same_with_active
+ log_test "fail_over_mac 1" "failover: bond mac is same with active slave mac"
+ check_backup_slave_mac_not_change
+ log_test "fail_over_mac 1" "failover: backup slave mac is not changed"
+
+ # fail_over_mac follow
+ bond_reset "mode active-backup miimon 100 fail_over_mac 2"
+ check_bond_mac_same_with_first
+ log_test "fail_over_mac 2" "bond mac is same with first slave mac"
+ check_bond_mac_same_with_active
+ log_test "fail_over_mac 2" "bond mac is same with active slave mac"
+ check_backup_slave_mac_inherit
+ log_test "fail_over_mac 2" "backup slave mac inherit"
+ do_active_backup_failover
+ check_bond_mac_same_with_first
+ log_test "fail_over_mac 2" "failover: bond mac is same with first slave mac"
+ check_bond_mac_same_with_active
+ log_test "fail_over_mac 2" "failover: bond mac is same with active slave mac"
+ check_backup_slave_mac_inherit
+ log_test "fail_over_mac 2" "failover: backup slave mac inherit"
+ check_first_slave_random_mac
+ log_test "fail_over_mac 2" "first slave mac random"
+
+}
+
trap cleanup EXIT
setup_prepare
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh
index 195ef83cfbf1..167aa4a4a12a 100644
--- a/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh
+++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh
@@ -39,6 +39,8 @@ g_ip4="192.0.2.254"
s_ip6="2001:db8::1"
c_ip6="2001:db8::10"
g_ip6="2001:db8::254"
+mac[0]="00:0a:0b:0c:0d:01"
+mac[1]="00:0a:0b:0c:0d:02"
gateway_create()
{
@@ -62,6 +64,7 @@ server_create()
for i in $(seq 0 1); do
ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns}
+ ip -n "${s_ns}" link set "eth${i}" addr "${mac[$i]}"
ip -n ${g_ns} link set s${i} up
ip -n ${g_ns} link set s${i} master br0
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh
index 3a1333d9a85b..23a2932301cc 100644
--- a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh
+++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh
@@ -26,6 +26,7 @@
# +-------------------------------------+
source bond_topo_2d1c.sh
+mac[2]="00:0a:0b:0c:0d:03"
setup_prepare()
{
@@ -36,6 +37,7 @@ setup_prepare()
# Add the extra device as we use 3 down links for bond0
local i=2
ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns}
+ ip -n "${s_ns}" link set "eth${i}" addr "${mac[$i]}"
ip -n ${g_ns} link set s${i} up
ip -n ${g_ns} link set s${i} master br0
ip -n ${s_ns} link set eth${i} master bond0
--
2.50.1
next prev parent reply other threads:[~2025-08-20 9:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-20 9:10 [PATCH net 1/2] bonding: set random address only when slaves already exist Hangbin Liu
2025-08-20 9:10 ` Hangbin Liu [this message]
2025-08-23 0:21 ` Jay Vosburgh
2025-08-25 4:07 ` Hangbin Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250820091009.393785-2-liuhangbin@gmail.com \
--to=liuhangbin@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jv@jvosburgh.net \
--cc=kuba@kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=razor@blackwall.org \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).