[PATCH V2 net 1/8] net/mlx5: Base ECVF devlink port attrs from 0

[Mark Bloch <mbloch@nvidia.com>]

From: Daniel Jurgens <danielj@nvidia.com>

Adjust the vport number by the base ECVF vport number so the port
attributes start at 0. Previously the port attributes would start 1
after the maximum number of host VFs.

Fixes: dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/esw/devlink_port.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/devlink_port.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/devlink_port.c
index b7102e14d23d..c33accadae0f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/devlink_port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/devlink_port.c
@@ -47,10 +47,12 @@ static void mlx5_esw_offloads_pf_vf_devlink_port_attrs_set(struct mlx5_eswitch *
 		devlink_port_attrs_pci_vf_set(dl_port, controller_num, pfnum,
 					      vport_num - 1, external);
 	}  else if (mlx5_core_is_ec_vf_vport(esw->dev, vport_num)) {
+		u16 base_vport = mlx5_core_ec_vf_vport_base(dev);
+
 		memcpy(dl_port->attrs.switch_id.id, ppid.id, ppid.id_len);
 		dl_port->attrs.switch_id.id_len = ppid.id_len;
 		devlink_port_attrs_pci_vf_set(dl_port, 0, pfnum,
-					      vport_num - 1, false);
+					      vport_num - base_vport, false);
 	}
 }
 
-- 
2.34.1