From: Jakub Kicinski <kuba@kernel.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, edumazet@google.com, pabeni@redhat.com,
andrew+netdev@lunn.ch, horms@kernel.org, almasrymina@google.com,
sdf@fomichev.me, joe@dama.to, linux-kselftest@vger.kernel.org,
Jakub Kicinski <kuba@kernel.org>
Subject: [PATCH net-next 3/4] selftests: drv-net: ncdevmem: restore old channel config
Date: Fri, 22 Aug 2025 13:00:51 -0700 [thread overview]
Message-ID: <20250822200052.1675613-4-kuba@kernel.org> (raw)
In-Reply-To: <20250822200052.1675613-1-kuba@kernel.org>
In case changing channel count with provider bound succeeds
unexpectedly - make sure we return to original settings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
.../selftests/drivers/net/hw/ncdevmem.c | 34 ++++++++++++-------
1 file changed, 22 insertions(+), 12 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/hw/ncdevmem.c b/tools/testing/selftests/drivers/net/hw/ncdevmem.c
index 8d9d579834b1..580b4459a840 100644
--- a/tools/testing/selftests/drivers/net/hw/ncdevmem.c
+++ b/tools/testing/selftests/drivers/net/hw/ncdevmem.c
@@ -469,7 +469,7 @@ static void reset_rss(void)
run_command("ethtool -X %s default >&2", ifname, start_queue);
}
-static int configure_channels(unsigned int rx, unsigned int tx)
+static int check_changing_channels(unsigned int rx, unsigned int tx)
{
struct ethtool_channels_get_req *gchan;
struct ethtool_channels_set_req *schan;
@@ -525,20 +525,32 @@ static int configure_channels(unsigned int rx, unsigned int tx)
ethtool_channels_set_req_set_tx_count(schan, tx - rx);
}
- ret = ethtool_channels_set(ys, schan);
- if (ret)
- fprintf(stderr, "YNL set channels: %s\n", ys->err.msg);
} else if (chan->_present.rx_count) {
ethtool_channels_set_req_set_rx_count(schan, rx);
ethtool_channels_set_req_set_tx_count(schan, tx);
-
- ret = ethtool_channels_set(ys, schan);
- if (ret)
- fprintf(stderr, "YNL set channels: %s\n", ys->err.msg);
} else {
fprintf(stderr, "Error: device has neither combined nor rx channels\n");
ret = -1;
+ goto exit_free_schan;
}
+
+ ret = ethtool_channels_set(ys, schan);
+ if (ret) {
+ fprintf(stderr, "YNL set channels: %s\n", ys->err.msg);
+ } else {
+ /* We were expecting a failure, go back to previous settings */
+ ethtool_channels_set_req_set_combined_count(schan,
+ chan->combined_count);
+ ethtool_channels_set_req_set_rx_count(schan, chan->rx_count);
+ ethtool_channels_set_req_set_tx_count(schan, chan->tx_count);
+
+ ret = ethtool_channels_set(ys, schan);
+ if (ret)
+ fprintf(stderr, "YNL un-setting channels: %s\n",
+ ys->err.msg);
+ }
+
+exit_free_schan:
ethtool_channels_set_req_free(schan);
exit_free_chan:
ethtool_channels_get_rsp_free(chan);
@@ -1019,16 +1031,14 @@ int run_devmem_tests(void)
}
/* Deactivating a bound queue should not be legal */
- if (!configure_channels(num_queues, num_queues)) {
+ if (!check_changing_channels(num_queues, num_queues)) {
pr_err("Deactivating a bound queue should be illegal");
- goto err_reset_channels;
+ goto err_unbind;
}
err = 0;
goto err_unbind;
-err_reset_channels:
- /* TODO */
err_unbind:
ynl_sock_destroy(ys);
err_reset_headersplit:
--
2.50.1
next prev parent reply other threads:[~2025-08-22 20:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-22 20:00 [PATCH net-next 0/4] selftests: drv-net: ncdevmem: fix error paths Jakub Kicinski
2025-08-22 20:00 ` [PATCH net-next 1/4] selftests: drv-net: ncdevmem: remove use of error() Jakub Kicinski
2025-08-22 21:25 ` Stanislav Fomichev
2025-08-22 20:00 ` [PATCH net-next 2/4] selftests: drv-net: ncdevmem: save IDs of flow rules we added Jakub Kicinski
2025-08-22 21:27 ` Stanislav Fomichev
2025-08-22 22:15 ` Jakub Kicinski
2025-08-22 20:00 ` Jakub Kicinski [this message]
2025-08-22 22:14 ` [PATCH net-next 3/4] selftests: drv-net: ncdevmem: restore old channel config Stanislav Fomichev
2025-08-22 20:00 ` [PATCH net-next 4/4] selftests: drv-net: ncdevmem: configure and restore HDS threshold Jakub Kicinski
2025-08-22 22:26 ` Stanislav Fomichev
2025-08-22 22:34 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250822200052.1675613-4-kuba@kernel.org \
--to=kuba@kernel.org \
--cc=almasrymina@google.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=joe@dama.to \
--cc=linux-kselftest@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sdf@fomichev.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).