From: Chen-Yu Tsai <wens@kernel.org>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej@kernel.org>,
Samuel Holland <samuel@sholland.org>
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
Andre Przywara <andre.przywara@arm.com>
Subject: [PATCH net-next v3 00/10] net: stmmac: Add support for Allwinner A523 GMAC200
Date: Sat, 6 Sep 2025 12:13:23 +0800 [thread overview]
Message-ID: <20250906041333.642483-1-wens@kernel.org> (raw)
From: Chen-Yu Tsai <wens@csie.org>
Hi everyone,
This is v3 of my Allwinner A523 GMAC200 support series.
Changes since v2:
- DT binding
- Added "select" to avoid matching against all dwmac entries
- driver
- Include "ps" unit in "... must be multiple of ..." error message
- Use FIELD_FIT to check if delay value is in range and FIELD_MAX to get
the maximum value
- Reword error message for delay value exceeding maximum
- Drop MASK_TO_VAL
- Link to v2:
https://lore.kernel.org/all/20250813145540.2577789-1-wens@kernel.org/
Changes since v1:
- Dropped RFT tag
- Switched to generic (tx|rx)-internal-delay-ps
- dwmac-sun55i driver bits
- Changed dev_err() + return to dev_err_probe()
- Added check of return value from syscon regmap write
- Changed driver name to match file name
- sram driver bits
- Fixed check on return value
- Expanded commit message
- dtsi
- Fixed typo in tx-queues-config
- cubie a5e
- Add PHY regulator delay
- Link to v1:
https://lore.kernel.org/all/20250701165756.258356-1-wens@kernel.org/
This series adds support for the second Ethernet controller found on the
Allwinner A523 SoC family. This controller, dubbed GMAC200, is a DWMAC4
core with an integration layer around it. The integration layer is
similar to older Allwinner generations, but with an extra memory bus
gate and separate power domain.
Patch 1 adds a new compatible string combo to the existing Allwinner
EMAC binding.
Patch 2 adds a new driver for this core and integration combo.
Patch 3 extends the sunxi SRAM driver to allow access to the clock delay
controls for the second Ethernet controller.
Patch 4 registers the special regmap for the clock delay controls as a
syscon. This allows the new network driver to use the syscon interface,
instead of the following dance which the existing dwmac-sun8i driver
does:
of_parse_phandle();
of_find_device_by_node();
dev_get_regmap();
With this change in place we can also drop the above from the
dwmac-sun8i driver.
Patch 5 adds a device node and pinmux settings for the GMAC200.
Patches 6 and 8 add missing Ethernet PHY reset settings for the
already enabled controller.
Patches 7, 9, and 10 enable the GMAC200 on three boards. I only
have the Orangepi 4A, so I am asking for people to help test the
two other boards. The RX/TX clock delay settings were taken from
their respective BSPs, though those numbers don't always work, as
is was the case for the Orangepi 4A.
Please have a look and help test on the Avaota A1. I don't expect
any issues there though, since the PHY is always on, unlike on the
Cubie A5E.
Patches 1 and 2 should go through net-next, and I will take all the
other patches through the sunxi tree.
Thanks
ChenYu
Chen-Yu Tsai (10):
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
net: stmmac: Add support for Allwinner A523 GMAC200
soc: sunxi: sram: add entry for a523
soc: sunxi: sram: register regmap as syscon
arm64: dts: allwinner: a523: Add GMAC200 ethernet controller
arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting
arm64: dts: allwinner: a527: cubie-a5e: Enable second Ethernet port
arm64: dts: allwinner: t527: avaota-a1: Add ethernet PHY reset setting
arm64: dts: allwinner: t527: avaota-a1: enable second Ethernet port
arm64: dts: allwinner: t527: orangepi-4a: Enable Ethernet port
.../net/allwinner,sun8i-a83t-emac.yaml | 96 ++++++++++-
.../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 55 ++++++
.../dts/allwinner/sun55i-a527-cubie-a5e.dts | 31 +++-
.../dts/allwinner/sun55i-t527-avaota-a1.dts | 29 +++-
.../dts/allwinner/sun55i-t527-orangepi-4a.dts | 23 +++
drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++
drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
.../ethernet/stmicro/stmmac/dwmac-sun55i.c | 159 ++++++++++++++++++
drivers/soc/sunxi/sunxi_sram.c | 14 ++
9 files changed, 414 insertions(+), 6 deletions(-)
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-sun55i.c
--
2.39.5
next reply other threads:[~2025-09-06 4:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-06 4:13 Chen-Yu Tsai [this message]
2025-09-06 4:13 ` [PATCH net-next v3 01/10] dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 02/10] net: stmmac: Add support for Allwinner A523 GMAC200 Chen-Yu Tsai
2025-09-06 21:15 ` kernel test robot
2025-09-06 4:13 ` [PATCH net-next v3 03/10] soc: sunxi: sram: add entry for a523 Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 04/10] soc: sunxi: sram: register regmap as syscon Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 05/10] arm64: dts: allwinner: a523: Add GMAC200 ethernet controller Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 06/10] arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting Chen-Yu Tsai
2025-09-08 13:45 ` Jernej Škrabec
2025-09-06 4:13 ` [PATCH net-next v3 07/10] arm64: dts: allwinner: a527: cubie-a5e: Enable second Ethernet port Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 08/10] arm64: dts: allwinner: t527: avaota-a1: Add ethernet PHY reset setting Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 09/10] arm64: dts: allwinner: t527: avaota-a1: enable second Ethernet port Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 10/10] arm64: dts: allwinner: t527: orangepi-4a: Enable " Chen-Yu Tsai
2025-09-06 7:30 ` arm64: allwinner: a523: Enable MCU PRCM and NPU Muhammed Subair
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250906041333.642483-1-wens@kernel.org \
--to=wens@kernel.org \
--cc=andre.przywara@arm.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=jernej@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).